Global Industrial 670774 User manual

1MODEL #
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
Models: 670774
Global Industrial Rubber Speed Hump with
Mounting Kit, 23.5'' W x 110" L
12 3 4 5
1. Male End Cap (1pcs)
2. Middle Section(5pcs)
3. Female End Cap(1pcs)
4. Plastic Expansion Screw Sleeve
5. Mounting Screw
Package Contents:
Slows vehicles 5- 10 MPH
Recommended for concrete and asphalt surfaces
What You Need:
High-speed hammer drill with a 3/4" masonry bit
Mounting screw and expansion screw sleeve (included)
Nailing hammer
670779 Global Industrial Rubber Speed Hump, Middle Section is
available for additional purchase to lengthen

2
Rubber Speed Hump User Manual
Assembly Instructions
1. Place Speed hump in designated area. Mark mounting hole
placement. Remove speed hump and pre-drill holes to install
plastic screw sleeve to the ground.
2. Align rubber endcaps and middle section on top of
plastic screw sleeve. Install the mounting screws into the
plastic screw sleeves using a hammer.
Warning: Excessive tightening may damage the hump