Global 900E User manual

900E
Vehicle GPS Tracker
User Manual
2009-10-01
www.globaltrackergps.com

Table of Contents .
1. Working Directions..........................................3
2. GPS Tracker Installation..................................3
2.1. Product Parts List ........................................3
2.2. Precaution before Installation …...................
2.3. Installation....................................................
2.4. Wiring Description.........................................6
3. Operating Instructions .....................................7
4. SMS Tracking by Mobile....................................8
4.1. Position Report Function................................9
4.2. Tracking Function..........................................9
4.3. Stop tracking function....................................9
. GPRS Tracking by computer...........................10
.1.Set APN........................................................10
.1.Set IP and Port..............................................10
6. Take Photo function........................................10
6.1. Take photos.................................................10
6.2.Takephotos by press SOS button..................10
6.3. Set the time interval to take photos..............10
7. LCD Screen………...........................................11
7.1. Use as navigation.........................................11
7.2. Make and receive phone calls. .....................11
7.3. 7.3.Receive massages from control center...11
7.4. Receive GPS signal.......................................11
7. . Fuel Sensor …...............................................11
www.globaltrackergps.com

1. Working Directions
Thank you for your purchase of 900E Vehicle GPS Tracker. In order to
realize the full functions of this product, please read this manual
carefully efore starting to use the product.
1 This product can only e maintained and repaired y qualified
professional service personnel. If you detach this product for
maintenance or repair, your warranty will e invalidated.
2 When connecting the other devices, read carefully their instruction
manuals, so as to carry out correct installation; do not connect
incompati le device.
3 Please use genuine original parts and qualified atteries and
peripheral equipments, so as to avoid damage to this product.
4 As this product is a high-tech product, please read carefully this
manual efore starting to use the product, so as to avoid
inappropriate operation.
5 Drivers should not operate this product while driving a vehicle,
there y, affecting safe driving.
6 This product can work properly only when GSM communication is in
good condition.
7 Please reduce electromagnetic wave interference to the product; and
use it properly.
8 GPS communication is lia le to e affected y environmental
shielding; may fail to carry out positioning during certain
circumstances. It will resume the positioning function as soon as it
leaves the shielding environment. This is normal. Please do not
worry when encountering such pro lem.
9 Each signal sent out from the system will e confirmed for
successful transmission in the ase station of the mo ile operator.
However, if system stoppage occurs or if the mo ile telephone is
preset to a switch off state y the customer, it cannot ensure
successful transmission.
10 For safety reason, do not tell the other people your 900E mo ile
num er, without taking precautions. Otherwise, your privacy may e
compromised along with other safety pro lem.
2. Wiring Installation
2.1. Product Parts List
www.globaltrackergps.com

GPS Tracker
Unit
GPS Antenna
GSM Antenna
Car Charger
Lighter
Socket
www.globaltrackergps.com

2.2. Precaution before Installation
1 Check if all the parts are included.
2 Prepare a SIM card for GSM communication. Use some other mo ile
phone to confirm that the PIN code has not een set and that it can
dial out and receive telephone calls and SMS without pro lem.
3 Before install the SIM card; make sure to cut off power from the GPS
Tracker unit. The correct installation method is to push the tray
completely into the GPS Tracker unit, until you feel it is hooked y
something.
4 Find a suita le place inside the car for installing the unit.
5 Check if all the wiring has een connected correctly; then connect
the GPS Tracker unit to the power source.
2.3. INSTALLATION.
2.3.1 Ste 1: Install SIM Card
1Using a speculate o ject to poke the small utton of the SIM card
seat, and then it will pop-up a small drawer.
2Put the SIM card in the drawer, and put ack the drawer, as
direction shown in the picture.
3Make sure to turn off the power efore install the SIM card.
4Make sure to deactivate the PIN code, so that the SIM card can
operate without PIN protection.
5Before install the SIM card to the GPS Tracker, please use a mo ile
phone to make sure the SIM card can make & receive phone calls
without pro lem.
6Before install the SIM card to the GPS Tracker, please use a mo ile
phone to empty the SMS storage of the SIM card.
2.3.2 Ste 2: Connect GSM Antenna.
1Connect the GSM Antenna to the unit.
2Fasten the connection y turning the screw in the ottom.
3Please do not swing round the antenna itself.
2.3.3 Ste 3: Connect GPS Antenna.
1 GPS antenna is used to receive satellite signals in the sky. It
should e positioned at a place where it will have an uno structed
view of the sky. The ideal location is top of the dash oard or close
to the rear window of the car.
2 GPS antenna can pick up signals through glass and plastic, ut will
not "see the sky" through metal or other conductive surfaces. To
avoid distractions of GPS signal, make sure the antenna is not
covered or shielded y any o ject containing metal, such as the
metallic windshield.
www.globaltrackergps.com

3 If your car is with metallic windshield please cut a hole on the
windshield a ove the place where you put the GPS antenna, so that
the antenna can receive the GPS signals.
2.3.4 Ste 4: Connect ower charging.
900E connects to the 4pin and 6pin wires.
2.4. Wiring Descri tion.
4 ins connector
Pin Color function
1 Red Power switch
2 Red Power switch
3 Yellow Connect to door sensor
4 Green Undefined input. (*)
(*) for example you can use it to detect the signal of car alarm.
6 Pins Connector.
Pin Color function.
1 Red DC in Input voltage: 8-40V
Suggestion: 12V
2 Black GND
3 Brown Output Starter kill relay you
can use it to cut the
electricity or oil of
the car
4 White SOS utton
5 Green Output Starter kill relay you
can use it to cut the
electricity or oil of
the car
6 Blue ACC Signal detecting
According to the relay parameter to make sure to following requirement:
The input voltage of relay must e suited to the car attery
www.globaltrackergps.com

3. O erating Instructions.
SMS rotocol of 900E, the default assword of 900E is 000000
SMS Instruction Format Remark
1 Request one position A******,000 000: command code
******: password, default 000000
2 Modify user password A******,001,###### 001: command code
******: old password , default 000000
######: new password
3 Set a preset p one number for SOS
button or monitoring number
A******,002,1, Tel Number
A******,002,2, Tel
Set SOS number
Set monitoring number
4 Set t e time interval of
position refres to SOS number
A******,003,XXX XXX =000,stop
XXX = 001 – 999 time internal (unit: min)
5 Set low power alarm W en t e 900E
voltage is lower t an t e preset
value, 900E will send
one lower power alarm SMS to t e
control number. Ot erwise,t ere is
not t is function in ve icle tracker.
A******,004,X X : voltage preset value
X=0, close (default )
X =1, <3.5V send SMS alarm
X =2, <3.6V send SMS alarm
X =3, <3.7V send SMS alarm
X =4, <3.8V send SMS alarm
X =5, <3.9V send SMS alarm
6 Set over speed alarm W en t e
900E speed ig er t an t e preset
value, 900E will send one over
speed alarm SMS to t e control
A******,005,XX XX : t e speed preset value
XX = 00 , close
01 =
XX =
99 (unit: XX Km/ )
7 GPRS Status, To
c eck GPRS Status
A******,502 502: command code
8 Get IMEI A******,505
9 Set GPRS internal of position refres A******,506,00030 00030: Suc as 30 seconds interval is
00030
10 C eck GPRS internal of position
refres
A******,507
11 Inquire GPRS parameter Retrue
Including IP, Port, APN
A******,006
12 Control t e output A******,007,P,F P: the position of the
output
P =1 output 1 P =2 output 2
www.globaltrackergps.com

F: the control signal
F =1 give t e relay t e current to drive it
(cut
off t e car power).
F =0 cut off t e current of t e relay
(comeback t e normal).
13 Time zone setting A******,008,-x X= -4
x= -3
14 Inquire t e system parameter.
Including t e software version,
password, interval, speed limit, area
limit, I/O state, GPS state, SOS
number, control number, etc
A******,009
15 GPRS switc A******,010,X X: GPRS function
=0 GPRS OFF
=1 GPRS UDP
=2 GPRS TCP
16 SET APN A******,011,APN,
username,password
APN: GPRS use t is gateway to connect
internet.
Username: APN Username
Password: APN Password
T e default APN is CMNET
17 Set t e center IP and Port Set t e
server parameter.
A******,012,IP,Port IP: Platform server ip
Port: Platform server port
18 LED Lig t Switc A******,666, X X: LED Lig t Switc
X =0 LED Lig t OFF
X =1 LED Lig t ON
19 P otos take interval A******,503,XX Xx= time interval (10 min.)
xx=01 (10 min)
xx=02 (20 min) ...
20 C eck fuel sensor ADC A******,201
21 Set fuel Sensor A******,202,XXXX,YYYY XXXX=MAX. FUEL SENSOR
YYYY=MIN. FUEL SENSOR
22 Inquire Max and Min ADC fuel
sensor
A******,203
23 Reset to factory settings A******,888
24 Restart Tracker A******,999
4. SMS Tracking by Mobile.
4.1. Position Report Function
4.1.1. Get position from vehicle way 1:
No matter where you are, when you want to know the position of your
vehicle.
Step1 Send a SMS message or make a telephone call to the 900E.
Step2 vehicle will report its location ack to you y SMS, which
including the position information
Edit a message as following format, and then send it to 900E:
Command Remark
www.globaltrackergps.com

Send Format: A+Password+,+000 Get position command code is: 000
For Example Send message:
A000000,000 000: command code 000000: password, default 000000
Back information:
Lat:2232.6022N, Lon:11402.2969E This mean your position is on
North Latitude 22 degree 32.2232 cent and East Longitude 114 degree
2.2969 cent
4.1.2. Get osition from vehicle -way 2:
Apply for one position service y another way: you need pre-storage the
phone num er in SIM card:
Step1 Make a cell phone call to 900E
Step2 After listening the ring of 900E, it will hold off after two
rings.
Step3 Then, after 10 second, the cell phone will receive the Position
SMS. (Its means is 900E will send Position Data every 5 minute.)
4.2. Tracking Function
Tracking report function can e turned on or off according to the
requirements of the user.
Tracking function will continually report vehicle position until it get
stop command .In this tracking mode, 900E will send one position message
at a preset time interval.
Step1. Edit a message as following format, then send it to 900E
Command Remark
Send Format: A+Password+,+003,+XXX Note: XXX , if XXX=000 it is
STOP tracking
Unit: preset minute interval
Command code : 003
For example: A000000,003,003 003: command code
000000: password, default
000000
003: 3 minute interval
It means is 900E will send
Position Data every 3 minute.
Step2. 900E will send ack one SMS-----Set Time OK.
This SMS means that 900E is in tracking mode now and preset time interval
is 3 minutes.
Step3. 900E will send ack position SMS at preset time interval.
In this example, the SMS will send ack at preset time interval: 3 minute
4.3. Sto tracking function.
This function is used to turn off tracking report function. Edit a
message as following format, and then send it to 900E:
Command Remark
Command format: A+passwaord+,+003+,+000
For example: A000000,003,000
003: command code
000000: password, default
000: 0 minute interval, mean stop ack
www.globaltrackergps.com

5. GPRS Tracking by Com uter.
The default mode is GPRS when powering on the unit. If you want to use
the GPRS functions of
the 900E, Send SMS to set APN and IP, Port.
5.1.Set APN.
Send the SMS to the tracker as following format
Command Remark
Command format: A+Password+,+011,+APN
For example: A000000,011,CMNET 011 : Command code
000000: password, default
000000
CMNET: APN, is gateway to
connect internet, Each country is
different,
5.2.Set IP and Port.
Send the SMS to the tracker as following format:
Command Remark
Command format: A+Password+,+012,+IP:Port
For example: A000000, 012,119.147.24.211:8886 012 : Command code
000000: password, default
000000
119.147.24.211
Platform server IP
8886: Platform server software Port
When the 900E connect to the monitor system, the power LED flash y 1 S.
Then you can login in the tracking server to manage your car.
6. Take Photo function (only for 900E):
Connect the Camera to 900E,You can send a command to take photographs;
the car terminal will shoot pictures and spread to Center. After that,
pictures will display on the operation platform.
6.1. Take hotos on software.
6.2. Take hotos by ress SOS button.
6.3. Send SMS command to set the time interval to take hotos.
Such as 30 minutes to take a photo and send ack to software.
For exemple: A000000,503,01 (01= photos interval 10 min.)
www.globaltrackergps.com