If you require any assistance, please contact the
Technical Support team on 0203 006 9898,
option 3. They will be able to assist you.
Initial Setup Guide
Phone Socket Connection
1. Remove any devices from your Master phone socket (NTE), plug the Grey
RJ-11 cable into the DSL socket of the ADSL filter
2. Connect the other end of the RJ-11 cable into the grey DSL port of your
router
3. Plug the ADSL filter into the Master phone socket (NTE)
Connect the Computer
4. Using the supplied yellow RJ-45 cable, connect to LAN 1 of your Zyxel
Router to the network LAN connection socket of your computer.
Connect the Router Power Source
5. Connect the Power Adapter to the nearest AC mains outlet and the cable
from the supply to the power socket on your Zyxel Router. Switch on the
router by pressing the power button.
Check Router Status
6. Once the DSL and internet lights are both solid green, please wait 5
minutes. That’s it! You’re ready to use the internet.