Godrej Edge Penta 325 User manual

Protection of Environment:
Protection of environment” is one of the core values of Godrej and we seek your co-operation to make sure
that the product, packaging and plastic material is not disposed as unsorted municipal waste.
This symbol is known as the “Crossed-out Wheellie Bin Symbol”. It means that the product should
not be disposed of with your general house-hold waste.
It should be disposed of only through the company’s collection points with special treatment so as
to prevent any damage to the environment. Please call: 1800 209 5511 for applicable buy back
arrangement or visit: www.godrejappliances.com/green-think for details about Godrej
Appliances authorised collection points.

Installation Instruction

DESCRIPTION 325L 425L
Climate Class T T T
Rated Voltage 230V AC 230V AC 230V AC
Rated Frequency 50Hz 50Hz 50Hz
Refrigerant R290 R290 R290
Net Weight 45kg 50kg 55kg
Foam Blowing Agent Cyclopentane Cyclopentane Cyclopentane
525L
Do not place items such as bottled or sealed containers of fluid
like bottled beers and beverages under freezer mode to prevent
bursts and other losses.

7. Do not push the freezer by pressing at lid. It may misalign the lid from it’s position and
affect the performance.
Thermostat Control Knob
Indicator Light
Indicator Light
Control Panel
Trim
Cabinet
Basket
Hinge
LED Light*
Door
Handle
Foot
Ventilation Cover
< 90◦
8
*Select models only

Temperature adjustment
The temperature of the chamber is adjusted through the thermostat knob.
The user can choose the right temperature zone according to their needs.
For Cooler Mode the temperature control knob needs to be set at range 2,
For Freezer Mode the temperature control knob needs to be set at range 6

Using damp clothes soaked with lukewarm water to clean the cabinet of the freezer.
Extract the water conduit from chest freezer bottom and put in a water container to
collect the drained water.
(NOTE: PLEASE REMOVE THE PLASTIC PLUG(CAP) DURING THE DEFROSTING
ANDPUT IT BACK AFTER DEFROSTING IS DONE)

There is no heavy build up of frost.
Step 1 Step 4
Step 5
Step 2
Step 3
Take out Lock assembly 1 and handle
back 2 from the bag and Insert Lock
Assembly 1 in the handle back part 2.
Fix lock lever 4 in the position as shown.
at the back side with the small screw 5
provided in the bag
1
2
4
5
Fix handle back part 2 on lid using four
long screws 6 provided in the bag
6
2
Insert handle front cover 7 in the handle
back part 2 until a click at end.
7
68
Screw the lock bracket 8 on the freezer
cabinet with the help of another 2 long
screws 6
Use key 9 for the
lock operation
9
Complete assembly
with handle