GOTINSHTAIN G007 springer Instruction Manual

web:gotinshtain.com
e-mail: offi[email protected]
tel: [phone]
TECHNICAL DATA SHEET
G007 - springer
1. ОБЩА ХАРАКТЕРИСТИКА
AGE GROUP:
PLAYERS:
SIZE (cm):
IMPACT ZONE:
FREE FALL HEIGHT:
MATERIALS:
INSTALLATION:
STANDARDS:
WARRANTY:
3-12 y
1 max
L:85/W:25/H:85
6 m2
49 cm
metal plates; HDPE panels; springer
anchor / concrete
EN1176-1, EN1176-6
60 m
ISO 9001 ISO 14001

web:gotinshtain.com
e-mail: offi[email protected]
tel: [phone]
2. SIZE
TECHNICAL DATA SHEET
G007 - springer
3. IMPACT ZONE - 6 m2
4. INSTALLATION
40 cm
40 cm
Concrete 40/40/40cm
Reinforcing steel
Pole
Level 0 mark
Shock absorbing layer
Pole
Ground
Anchor plate
Level 0
Anchor Concrete
Shock absorbing layer
Ground
225
280
100100
100100
25
85
85
49

- defects from poor-quality manufacturing of the product
- defects caused by assembling or installation that do not comply with the manufacturer's instructions
The warranty covers:
- damage from incorrect use
- damages caused by irregular control and maintenance of the facility
The warranty does not cover:
- damage to the product caused by vandalism
- damage caused by fallen branches, parts of buildings, vehicles or other moving objects.
- defects from used low-quality materials
The warranty durance for the play equipment is 60m.
- defects from normal amortization, which occurs when using the product for its intended purpose: scratches, dents,
rubbing, fading, cosmetic problems from surface corrosion
web:gotinshtain.com
e-mail: offi[email protected]
tel: [phone]
6. MAINTENANCE AND CONTROL
5. MATERIALS
7. WARRANTY
It is carried out by the owner of the playground once every 7-10 days to identify visible hazards.
Permanent control:
Periodic control:
General safety requirements for playground equipments are defined by EUROPEAN STANDARD EN 1176-1
The owner of the playground checks the normal functioning and stability of the playground equipment as a result of
their use every 3 months.
Authorised technician checks the general level of safety of the playground according to the requirements by
EUROPEAN STANDARD EN 1176-1.
Annual control:
All detected irregularities should be removed to ensure normal use of the playground.
Fixings
They are made of metal tubes and plates, which ensure strength, long-term use, durability and reliability of the
equipments. Metal parts are covered by anti-corrosion primer and paint with UV protection.The structures of the
facilities are designed according to the requirements of EN 1176-1. They provide safety play for children, protection
against falling and all types of entrapment.
Seats, platforms, walls, roofs and decorative parts
Used HDPE and HEXA panels have required solidity то provide excellent resistance to atmospheric conditions and
vandalism.
All fixing elements are protected and secured by caps.
Constructions
8. ISO 9001; ISO 14001
The company GOTINSTAIN EOOD is certified according to ISO 9001 and ISO 14001 for quality management of the
production of playgrounds, sports and fitness equipment, garden and park equipment.
TECHNICAL DATA SHEET