GPS-Buddy AT-S User manual
4/4 1/4
GPS-Buddy AT-S
Magnetic asset tracker
Quick reference guide
Congratulations on purchasing the GPS Buddy AT-
S. In this manual you can read how you
can install and use the system fast and correctly.
Please read the manual before use
thoroughly.
Technical support
For questions about the operation, you can contact
the GPS Buddy helpdesk: support@gps-buddy.com or
by phone on +31 36-5382880. The opening hours are
Mondays to Fridays from 8 am to 6 pm.
You can download the detailed manual on: www.
gps-buddy.com/support/
Content of the box:
One magnetic asset tracker GPS Buddy AT-S in
splatter-proof casing
One quick reference guide
Our hard and software are improved constantly.
Due to this, the described functionality or speci-
cations may differ at the moment of operation.
The supplier is not liable for typing or printing
errors in this document.
Following the assets
• Create an asset in the GPS Buddy Studio environ-
ment. Here you are asked to enter
the ID.
• After entering the IOT ID the asset tracker is
immediately operational.
1/4
Operation of the system
Installing the GPS Buddy AT-S
Place the AT-S with the magnetic side in or on the
material/machine. We recommend installing the
AT-S in such a way that the reception of an GPS
signal is guaranteed.
Using the GPS Buddy AT-S
If a yellow and blue lamp are on on the AT-S,
the system is fully operational. The vehicle, the
material or the machines can be followed via the
planner app or the GPS Buddy Studio environment.
environment is followed. The location is establis-
hed once a day (for three minutes).
LED-status description
Yellow lamp is on GPRS is operational
Yellow lamp blinks for 2 sec Mobile initialisation
Yellow lamp is off Mobile is in sleep mode
Blue lamp is on GPS is operational
Blue lamp is blinking look for GPS signal
Blue lamp is off GPS is in sleep mode
Red lamp is off System functions properly
2/4 3/4
• All equipment using Wi-Fi causes interfe-
rence. This can have a distorting
effect on other equipment.
• The equipment is splatter-proof.
• GPS Buddy is not liable for any interruption
in the electronic circuit of the material or
machine the asset tracker is attached to.
• If you notice an interruption in the elec-
tronic circuit, immediately disassemble
the asset tracker and call our helpdesk for
further instructions.
Introduction
Please note
2/4
Operation of the system
Installing the GPS Buddy AT-S
Place the AT-S with the magnetic side in or on the
material/machine. We recommend installing the
AT-S in such a way that the reception of an GPS
signal is guaranteed.
Using the GPS Buddy AT-S
If a yellow and blue lamp are on on the AT-S,
the system is fully operational. The vehicle, the
material or the machines can be followed via the
planner app or the GPS Buddy Studio environment.
environment is followed. The location is establis-
hed once a day (for three minutes).
LED-status description
Yellow lamp is on GPRS is operational
Yellow lamp blinks for 2 sec Mobile initialisation
Yellow lamp is off Mobile is in sleep mode
Blue lamp is on GPS is operational
Blue lamp is blinking look for GPS signal
Blue lamp is off GPS is in sleep mode
Red lamp is off System functions properly
2/4 3/4
• All equipment using Wi-Fi causes interfe-
rence. This can have a distorting
effect on other equipment.
• The equipment is splatter-proof.
• GPS Buddy is not liable for any interruption
in the electronic circuit of the material or
machine the asset tracker is attached to.
• If you notice an interruption in the elec-
tronic circuit, immediately disassemble
the asset tracker and call our helpdesk for
further instructions.
Introduction
Please note
3/4
4/4 1/4
GPS-Buddy AT-S
Magnetic asset tracker
Quick reference guide
Congratulations on purchasing the GPS Buddy AT-
S. In this manual you can read how you
can install and use the system fast and correctly.
Please read the manual before use
thoroughly.
Technical support
For questions about the operation, you can contact
the GPS Buddy helpdesk: support@gps-buddy.com or
by phone on +31 36-5382880. The opening hours are
Mondays to Fridays from 8 am to 6 pm.
You can download the detailed manual on: www.
gps-buddy.com/support/
Content of the box:
One magnetic asset tracker GPS Buddy AT-S in
splatter-proof casing
One quick reference guide
Our hard and software are improved constantly.
Due to this, the described functionality or speci-
cations may differ at the moment of operation.
The supplier is not liable for typing or printing
errors in this document.
Following the assets
• Create an asset in the GPS Buddy Studio environ-
ment. Here you are asked to enter
the ID.
• After entering the IOT ID the asset tracker is
immediately operational.
4/4
Table of contents
