growplay CP20 - REV 2 User manual

COMPACT FRAME FREE STANDING
Assembly, Maintenance and User
Instructions Manual
WARNING!
READ ALL PRECAUTIONS AND INSTRUCTIONS IN THIS MANUAL
BEFORE USING THIS EQUPIMENT.
KEEP MANUAL IN A SAFE PLACE FOR FUTURE
TOTAL WEIGHT CAPACITY = 300KG
AGE OF USERS 3+
GROWPLAY MONKEYBARS ® PTY. LTD.
ABN: 36 627 796 141
P.O Box 2527, Clarkson, WA, 6030
Model: CP20 –REV 2
growplaymonkeybars.com/pages/assembly-installation

BEFORE YOU BEGIN
Thank you for purchasing Growplay Monkey Bars. With regular maintenance, your set will
provide many years of backyard fun.
Before you start to assemble your new GROWPLAY MONKEY BAR SET please ensure that
you have read this important information and that it is communicated to all users prior to
use.
INSTALLATION WARNING!
•Read all important precautions and instructions in this manual and all warnings on
the equipment to reduce the risk of serious injury.
•It is the responsibility of the owners and supervisors of this equipment to ensure
that it has been correctly assembled, anchored, maintained and the users obey the
safety instructions.
•This product is intended for use by children AGE OF USERS 3+
•Until the equipment has been correctly assembled and anchored, do not let children
use equipment.
•Always use Growplay Monkey Bars under adult supervision.
•It is required that the play equipment be ground anchored with the ground anchor
nails provided onto a soft or shock absorbing surface.
•Do not install over concrete or any other hard surface as a fall onto a hard surface
could result in serious injury or death.
•Ensure that the equipment is installed on a level surface and no less than 1.8 metres
from any structure or obstruction.
•Always inspect the equipment before it is used and replace any worn, defective, or
missing parts.
•Ensure that all connectors are regularly checked.
ELECTROCUTION HAZARD
Growplay monkey bars are made from metal. They are not grounded and will conduct
electricity. For obvious reasons and electrocution hazard exists. NO lights, heaters, electrical
and extension cords or any household electrical device or appliances are to be permitted on
or in the frame at any time.
WARNING: THIS DISASSEMBLED PRODUCT MAY CONTIAN SMALL PARTS
WHICH POSE A CHOKING HAZARD TO CHILDREN UNDER 3.
WARNING: ACCESSORIES MUST ONLY BE ATTACHED IN POSITIONS AS SHOWN IN
THESE INSTRUCTIONS. FAILURE MAY RESULT IN DEATH OR SERIOUS INJURY.

FOR THE USER
•Do not use this equipment when under the influence of drugs or alcohol.
•Do not jump on or off the frame.
•Wear clothing that does not have loops, hooks, drawstrings, or anything else that
can get caught on the frame.
USER INSTRUCTIONS
1. GROWPLAY MONKEY BARS are designed for up to 6 persons and not exceeding total
weight of 300kg.
2. AGE OF USERS 3+
3. Adult supervision for children of all ages is required at all times.
4. Educate children not let to walk close to, behind and in front, between moving parts.
5. Children are not to use the equipment in any other manner than intended.
6. Teach children not to hop off equipment while in motion or jump from moving play
items.
7. Do not twist chains or ropes or loop them over support bars as this may reduce the
structural integrity of the rope or chain.
8. Do not allow use of the equipment when it is wet as injury due to slips may occur.
9. Children are to be dressed in appropriate clothing while playing on or around the
equipment with correctly fitted and full foot enclosing footwear. Loose fitting items,
hood, and neck draw strings etc could potentially cause injury or death by
strangulation.
10. Inform children not to attach items to the playground equipment that are not
specifically designed or approved for use with the Growplay monkey bar equipment,
such as, but not limited to jump ropes, clothesline, pet leashes, cables, and chain as
they may cause a strangulation hazard.

ASSEMBLY: TWO PERSONS
Before starting assembly, please carefully read the following information.
•Two people are required to assemble frame.
•DO NOT FULLY TIGHTEN BOLTS UNTIL FRAME IS ASSEMBLED.
•Place all parts in one cleared area and remove the packaging material. Do not throw
away material until assembly is complete.
•Dispose of the packaging thoughtfully and ensure any plastic bags and small parts
are kept away from children or pets.
•Ensure that you check all tightening of parts twice and that the frame is stable after
assembly. Small movement through the frame is normal.
•Allow plenty of time to ensure that your monkey bars are set up correctly and safe to
use.
•Ensure that no exposed red tape is present and that all fixtures are extremely tight.
Ensure that tube is
correctly inserted and
tight! No red tab should
be seen.

LEVEL GROUND
IMPORTANT! ENSURE GROUND IS LEVEL. USE GROUND
ANCHOR SCREWS ON 4 OUTSIDE LEGS TO SECURE FRAME
BEFORE USE.
BASE PLATE
WASHER
GROUND ANCHOR

THE SAFETY BOLT IS SHOWN AS
RED IN THIS MANUAL TO
INDICATE THAT THIS SPECIAL
FASTERNER IS REQUIED TO
LOCATE POSITION OF TUBE AND
PREVENT LOOSENING
TYPICAL CHICAGO BOLT ASSEMBLY
IMPORTANT! ONLY FULLY TIGHTEN BOLTS ONCE FRAME IS
ASSEMBLED. FINGER TIGHTEN ONLY DURING ASSEMBLY.
TYPICAL RUNG ASSEMBLY
REFER TO PART NUMBERS
PRINTED ON ALL
TUBULAR PARTS DURING
ASSEMBLY.

ASSEMBLE MONKEY RUNG (MR1800KIT) S AS SHOWN

ASSEMBLE 2 x LADDER (LD2) AS SHOWN
NOTE CLAMP ON OPPISITE SIDE TO CLAMPS 11 & 12

PLACE SHORT TEE’S AS SHOWN.
FACING INWARDS WITH BOTS
UPWARDS. LEAVE LOOSE. DO NOT
TIGHTEN.
SECURE BASE PLATE
PLATE
HOLES MUST
BE FACING
INWARDS!
FRONT LEGS: IMPORTANT! LAY PARTS OUT AS SHOWN.
PART NUMBERS ARE PRINTED ON TUBULAR PARTS
CP20D1
CP20D2
CP20D2
CP20D1

CP20E1K
CP20A2
LOCATE SAFETY BOLT BOTH
SIDES FACING FORWARD
THROUGH 3 WAY CLAMP AS
SHOWN. FINGER TIGHTEN
ONLY!
CP20A2
CP20E1K
CONNECT CP20E1K WITH
BOLTS AND SLIDE ON REAR
3 WAY CLAMP. LEAVE
LOOSE UNTIL FRAME
ASSEMBLY.
NOTE END CAPS TO REAR
TOP SIDE RAILS: IMPORTANT! LAY PARTS OUT AS SHOWN.
RIGHT HAND TOP RAIL
LEFT HAND TOP RAIL
SLIDE 3 WAY TEE ONTO PART
CP20A2 FIRST AND ALIGN
WITH HOLE. INSERT SAFETY
BOLT FINGER TIGHT. NOTE
THAT THE BOLT IS
OUTWARDS WITH THE KINK
INWARDS AS SHOWN.