Grundig GUVCD2800 User manual

Helpline: 0870 920 1101
Connect the aerial lead.
Press the Power On/
Off button on the
front of the TV.
GUVCD2800 Integrated Digital TV
Quick Start Guide
Install remote
control batteries
Plug in to the
mains supply
and switch on
the mains
socket.
Press any of the
numeric buttons,
P+ or P- to switch
the TV on.
The message below will be displayed.
Press SELECT to start the search
for digital TV channels
Once the search for digital
TV channels is complete the
message below will be
displayed. Press SELECT.
Power On/Off
When the warning message
is displayed press T
to highlight CONTINUE
and press SELECT.
The search progression will be
displayed as shown below.
The search progression will be
displayed as shown below. Once the search is complete the
PROGRAM list will be briefly
displayed and the TV will tune to the
first channel found.
To switch between
analogue and digital
TV channels press
the TV/DTV button.
Refer to the manual
for detailed operating
information.
GUVCD2800_QSG.pmd 6/13/2006, 12:53 PM1

Connection Diagram
This diagram shows a typical configuration with
a recording device such as a DVD recorder or a
video cassette recorder.
Refer to the manual for how to set the EXT2
output to the digital TV channels so that they
can be recorded.
GUVCD2800_QSG.pmd 6/13/2006, 12:53 PM2