guide craft G97324 User manual

G97324,G97325,G97331,G97332
1

A(8)
1.5"
(40mm)
B(1)
C
E
E
E
E
EE
E
E
1.2"
(30mm)
2

E
B
A
A
A
A
E
E
AA
A
Assembly
1. Remove item from carton. Fold sides out until
they are straight.
2. Rotate clips on inside of doors until they are
firmly in place (Diagram 1).
3. Place platform in the down position, so that it
rests on the crossbar.
4. Attach feet (E) tothe front of the Kitchen
Helper using screws (A). Please note: because
the screws crisscross inside the posts, half the
feet have pre-drilled holes and pegs placed in
a higher position than the other feet.
5. Use screw (B) to hold platform in place when
in use (Diagram 2).
Storage
1. Remove screw (B).
2. Raise platform and hold in position.
3. Rotate side clips sothat they are in the open
position (Diagram 1).
4. Fold in sides accordian-style.
Maintenance
To ensure safe use of the Kitchen Helper,
please check all bolts periodically to ensure
they are securely fastened.
E
EE
E
E
2
1
3

Adjusting The Platform
The Kitchen Helper is designed to be used at 2different
heights, depending upon the age and size of the child.
To adjust it, follow the simple steps below:
1. Remove screws on both sides as shown in Diagram 1.
2. Lower platform and sides to desired height.
3. Replace screws and tighten.
2
1
4