GWS Euroboor ECO.30 User manual

USER MANUAL
ECO.30
Magnetic Drilling Machine
SERIAL NO.____________ DATE OF PURCHASE __________
E U R O B O O R
FOR PROFESSIONALS BY PROFESSIONALS
All manuals and user guides at all-guides.com
all-guides.com

ISSUE 1/Original version/OCT 2 14 2
Congratulations on your purchase of the Euroboor ECO.3 Portable Magnetic Drilling Machine. Your
model is designed to produce superior holes quickly and efficiently. Through years of experience,
constant innovation and development, Euroboor BV is committed to provide you with metal cutting
tools and products to help you be more productive.
Before operating your new magnetic drilling machine, please read all instructions first. These include
the Operator’s Manual and Warning Label on the unit itself. With proper use, care and maintenance,
your model will provide you with years of effective hole drilling performance.
TO REDUCE THE RISK OF INJUR USER MUST READ AND UNDERSTAND ALL INSTRUCTIONS
0800 536 774
[email protected]
www.globalweldingsupplies.com
13 Patiki Road Avondale, Auckland 1026
All manuals and user guides at all-guides.com

ISSUE 1/Original version/OCT 2 14 3
Fig. 1
All manuals and user guides at all-guides.com

ISSUE 1/Original version/OCT 2 14 4
Symbol Term, meaning Explanation
Read documentation
Be absolutely sure to read the enclosed
documentation such as the Instruction Manual and
the General Safety Instructions.
Wear ear protection Use ear protection during operation.
Wear eye protection Use eye-protection during operation.
Danger/warning/caution Observe the information in the adjacent text!
European conformity symbol Confirms the conformity of the power tool with
the directives of the European Community.
Class of protection I
Product with basic insulation and exposed
(touchable), conductive parts additionally
connected to the protective earth conductor.
mm Millimeter Unit of measure for length, width, height or depth
kg Kilogram Unit of measure for the mass
V Volt Unit of measure for the electric voltage
A Ampere Unit of measure for the electric current intensity
W Watt Unit of measure for the output
N Newton Unit of measure for the force
min Minutes Unit of measure for the time
no No-load speed Revolution speed at no-load
1/min per minute Unit of measure for number of revolutions,
strokes, impacts or oscillations per minute.
0800 536 774
[email protected]
www.globalweldingsupplies.com
13 Patiki Road Avondale, Auckland 1026
All manuals and user guides at all-guides.com

ISSUE 1/Original version/OCT 2 14 5
GENERAL POWER TOOL SAFET WARNINGS
Do not use this power tool before you have thoroughly read and completely understood this
Instruction Manual and the “General Safety Instructions”, including the figures, specifications, safety
regulations and the signs indicating DANGER, WARNING and CAUTION.
WARNING: When using electrical tools basic safety precautions should always be followed to
reduce the risk of fire, electrical shock and personal injury including following.
Please also observe the relevant national industrial safety regulations. Non-observance of the safety
instructions in the said documentation can lead to an electric shock, burns and/or severe injuries.
This Operator’s Manual and the “General Safety Instructions” should be kept for later use and
enclosed with the power tool, should it be passed on or sold.
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2. Do not operate magnetic drilling machine in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Magnetic drilling machine may create sparks which may
ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a magnetic drilling machine.
Distractions can cause you to lose control.
ELECTRICAL SAFET
1. Magnetic drilling machine plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs.
2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is grounded.
3. Do not expose magnetic drilling machines to rain or wet conditions. Water entering a
machine will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord to carry the magnetic drilling machine or pull the
plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace
damaged cords immediately. Damaged cords increase the risk of electric shock.
5. When operating a magnetic drilling machine, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
6. If operating a magnetic drilling machine in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
PERSONAL SAFET
1. Stay alert, watch what you are doing and use common sense when using a magnetic drilling
machine. Do not use machine while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating magnetic drilling machines may result
in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be
caught in moving parts.
3. Avoid accidental starting. Be sure switch is off before plugging in. Carrying magnetic drilling
machines with your finger on the switch or plugging in magnetic drilling machines that have
the switch on invites accidents.
All manuals and user guides at all-guides.com

ISSUE 1/Original version/OCT 2 14 6
4. Never place hands, fingers, gloves or clothing near cutting area or rotating machine parts.
5. Remove adjusting keys or switches before turning the machine on. A wrench or a key that is
left attached to a rotating part of the machine may result in personal injury.
6. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance
enables better control of the magnetic drilling machine in unexpected situations.
7. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard
hat, or hearing protection must be used for appropriate conditions.
8. Always use supplied safety chain during any work on non-horizontal components. Mounting
can release.
MACHINE USE AND CARE
1. When using the machine on non-horizontal surfaces, you must use cutting paste. Do not use
oil because the oil can drip into the motor unit.
2. During machine operations, the annular cutter must be cooled and lubricated with good
quality cutting or lubrication oil. Remove the slug from the annular cutter after each hole.
Caution, the slug may be hot!
3. Use clamps or other practical way to secure and support the work piece to a stable platform.
Holding the work by hand or against your body is unstable and may lead to loss of control.
4. Do not use machine if switch does not turn it on or off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
5. Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures reduce the risk of starting
the tool accidentally.
6. Store idle Magnetic drilling machines out of reach of children and other untrained persons.
Tools are dangerous in the hands of untrained users.
7. Maintain machines with care. Keep cutting tools sharp and clean. Properly maintained tools,
with sharp cutting edges are less likely to bind and are easier to control.
8. Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the machine operation. If damaged, have the tool serviced before
using. Many accidents are caused by poorly maintained tools.
9. Use only accessories that are recommended by Euroboor BV for your model. Accessories that
may be suitable for one machine, may become hazardous when used on another machine.
SERVICE
1. Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of electric shock or injury.
3. When using this machine, you MUST wear ear and eye protection.
0800 536 774
[email protected]
www.globalweldingsupplies.com
13 Patiki Road Avondale, Auckland 1026
All manuals and user guides at all-guides.com
all-guides.com

ISSUE 1/Original version/OCT 2 14 7
ADDITIONAL SPECIFIC SAFET RULES FOR MAGNETIC DRILLING MACHINES
•Keep your fingers well out of the drill area;
•Avoid touching the drilled core that is automatically ejected by the centering pin when the
working procedure is finished. Contact with the core when it is hot, or if it falls, can cause
personal injuries;
•Always use the drill guard. Before turning on machine ensure the guard is closed securely;
•Always use the safety strap;
•The magnetic drilling machine is suitable for use on steel with a thickness starting from 1
mm, with zero air gap between the magnet core surface and the mounting surface.
Curvature, coats of paint and surface irregularities will create an air gap. Keep the air gap to a
minimum;
•Always place the machine on a flat surface;
•Do not clamp the magnetic drilling machine on small or irregularly shaped objects;
•Always place the machine on a surface that is clear of shavings, chips, swarf and surface dirt;
•Keep the magnet clean and free of debris and swarf;
•Do not turn on the machine until it has been mounted and installed according to these
instructions;
•Do not turn on the machine before having checked that the magnetic stand has been
tightened firmly to the mounting surface;
•Adjust the table so cutter does not extend into the work piece before drilling. Do not perform
any design, assembly or construction activities on the work piece while the machine is turned
on;
•Before turning on the machine, make sure the accessory has been mounted correctly;
•Always use the recommended speed for the accessories and the material;
•Do not use the machine on the same work piece on which electric welders are being used;
•Use only an appropriate cutting fluid. We offer a range of premium cutting oils and lubricants
which are specially developed and selected for optimum performance and maximum tool
life;
•Do not use liquid cutting fluids while drilling vertically or overhead. Dip the cutter in cutting
paste or apply an appropriate spray for these applications;
•Do not pour cutting fluid into the reservoir while it is mounted in the bracket. Do not allow
cutting fluid to enter the drill motor;
•Before use, ensure movable chuck guard operates properly;
•Ensure that metal chips or resinous residue cannot lead to blockage of the function;
•In case of jammed cutter disconnect the machine from the power supply, remove the reason
for the jam before turning on the machine again.
RESIDUAL RISKS
In spite of the application of the relevant safety regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
•Impairment of hearing;
•Risk of personal injury from flying particles;
•Risk of burns due to accessories becoming hot during operation;
•Risk of personal injury due to prolonged use.
All manuals and user guides at all-guides.com

ISSUE 1/Original version/OCT 2 14 8
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection in areas with noise emissions > 8 db(A).
Wear eye protection.
POSITION Serial number
The Serial Number, which also includes the type of machine, the year and month of manufacturing
and identification number, is engraved on the frame, magnet and the motor unit.
Example:
3 14 9 1
Model type
Year of Manufacture
Month of manufacture
Identification number
Package Contents
1 Magnetic drilling machine
1 Carrying case
1 Drill guard
3 Handles
1 Allen Key 2.5
1 Allen Key 3
1 Allen Key 4
1 Allen Key 5
1 Wrench
1 Lubrication system
1 Cutting oil
1 Safety chain
1 Operators manual
1 Exploded drawing
1 Safety Ear Protection
1 Safety Glasses
1 Safety Gloves
1 IBC.7 pilot pin
0800 536 774
[email protected]
www.globalweldingsupplies.com
13 Patiki Road Avondale, Auckland 1026
All manuals and user guides at all-guides.com

ISSUE 1/Original version/OCT 2 14 9
TECHNICAL DATA ECO.30
ANNULAR CUTTERS ø 12 - 3 mm
TWIST DRILLS ø 1 - 13 mm
MAX. DEPTH OF CUT 48 mm
LENGTH 22 mm
WIDTH 17 mm
HEIGHT 293-383 mm
STROKE 9 mm
WEIGHT 8,5 kg
MAGNET (L x W x H) 16 x 8 x 37 mm
MAGNETIC FORCE 12 kg
MOTOR POWER 9 W
TOTAL POWER 95 W
SPEED (no load) 775 minˉ¹
SPEED (load 95 W) 4 minˉ¹
SPINDLE 19, 5 mm (3/4”)Weldon
VOLTAGE 11 - 12 V / 5 -6 Hz
22 - 24 V / 5 -6 HZ
Emission values for sound and vibration
(Two-figure – specifications as per ISO 4871)
Sound emission
Measured A-weighted sound power level LwA (re 1 pW), in
decibels 95
Measuring uncertainty KwA, in decibels 3
A-weighted emission pressure power level measured at the
workplace LpA (re 2 μPa), in decibels 84
Measuring uncertainty KpA, in decibels 3
Vibration emission
Rated acceleration, in m/s² .5
Measuring uncertainty K, in m/s² 1.5
REMARK: The sum of the measured emission value and respective measuring inaccuracy represents
the upper limit of the values that can occur during measuring.
Wear ear protection!
For measurement values obtained according to the respective product standard, see the last page of
this Instruction Manual.
All manuals and user guides at all-guides.com

ISSUE 1/Original version/OCT 2 14 1
DESCRIPTION (fig. 1)
WARNING: Never modify the power tool or any part of it. Damage or personal injury could
result.
1. Safety Guard
2. Feed handle
3. Cooling system tank
4. Magnetic stand
5. Magnet switch
6. Motor switch
INTENDED USE
This magnetic drilling machine is intended for commercial use as a drilling machine for drilling
materials with a magnetizable surface using annular cutters and twist drills, and for tapping,
countersinking and reaming in a weather-protected environment using the application tools and
accessories recommended by EUROBOOR.
The magnetic drilling machine can be used horizontally, vertically or overhead.
INSTRUCTIONS FOR PUTTING INTO OPERATION
Please make sure that the contacting surface for the magnet is level, clean and rust-free.
Remove any varnish or primer. When working on materials that are not magnetizable, suitable
fixation devices, obtainable as accessories from EUROBOOR, e. g. suction plate, vacuum plate or
pipe-drilling device must be used.
When working on steel materials with a material thickness of less than 12 mm, the workpiece must
be reinforced with an additional steel plate in order to guarantee the magnetic holding power.
Check the machine for possible damage; Before using the machine, you must carefully check
protective devices or slightly damaged components to ensure they are operating perfectly and as
intended.
Check that moving are in perfect working order and do not jam and check whether parts are
damaged. All parts must be correctly installed and fulfill all conditions necessary to ensure perfect
operation of the machine.
Damaged protective devices and parts must be repaired or replaced according to specifications by
EUROBOOR of any authorized EUROBOOR dealer.
DO NOT use under wet conditions or in presence of flammable liquids or gases. This magnetic drilling
machine is a professional power tool.
DO NOT let children come into contact with the machine. Supervision is required when
inexperienced operators use this machine.
ELECTRICAL SAFET
The electric motor has been designed for one voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your EUROBOOR MAGNETIC DRILLING MACHINE is designed in class I (grounded) according to
EN 61 29-1. Earth wire is required.
If the supply cord is damaged, it must be replaced by a specially prepared cord available through the
EUROBOOR service organization.
0800 536 774
[email protected]
www.globalweldingsupplies.com
13 Patiki Road Avondale, Auckland 1026
All manuals and user guides at all-guides.com