H&B CA-8050BT User manual
USER MANUAL
H&B CA-8050BT
INFO: www.hb-direct.com
This manual is a free translation (resumed), non professional, from French into Spanish
and then into nglish.
VOLUME BUTTON
"In playback mode
<- -> Up and Volume Down
# Press and turn for value changes
Bass (record) let low positive values (+2, +3 ...)
Treble (treble) leave positive values means (+3, +5 ...)
Balance (of right and left stereo) 0
Fader (front - back) 0
- In radio mode
<- -> Up and Volume Down
# Press 2 seconds and turn to change values
AF (Automatic Memory Preset) push and turn (leave in OFF
INVOL (sets the default volume to turn on the radio)
CLOCK (to change format of 12 and 24)
TAVOL (sets the default volume of traffic information TA)
EON (automatic traffic bulletins)
PTY (search by type of program, if not in use, turn OFF
TELVOL (vol default stable bluetooth phone)
LOC (On / Off allows low-frequency tune)
MONO (leave off, stereo)
LOUD (On / Off put on to activate the sound reinforcement)
BEEP beeps when using the buttons
DSP (EQ) Click to select the value that we like
None (normal), Pop, Rock, Classic, Flat (flat)
You exit the menu automatically after 5 seconds.
BUTTON AS / PS (MP3 folder search)
AS (Auto Store) / PS (search)
- In radio mode (AS)
# Press two seconds to store stations automatically. (It is most advisable to
manually store looking for the arrows and pressing 3 seconds to the number
you wish to store the station)
- In playback mode (PS)
# Press two seconds to find files. Press to switch the search:
FILE NUMBER (by track number).
FILE NAME (search by name) you can search by song name if they are
labeled correctly (ID3Tag)
FOLDER search folders (does not apply to cd, usb and sd only) turn the
volume button to locate the folder (music group) and press BAND to open the
folder.
DIS BUTTON
- In radio mode
# Push to put the display shows the Standard mode, PTY (search by type of
station) or clock.
1 to 6 buttons
- In radio mode
# Press 2 seconds to store a station. 1 second to listen to a preset.
- In playback mode
# 1. Pause.
# 2. Repeating tracks
# 3. Introduction (plays the beginning of each track)
# 4. RDM. Random read MP3 files
# 5. -10. Backs tracks from 10 to 10
# 6. +10. Advance tracks from 10 to 10
BUTTON BAND (enter)
- In radio mode
# Push to change bands (FM, AM ...)
# Press 2 seconds to activate TA (traffic offers tips RDS)
- In playback mode
# Allows you to enter (enter) to a folder that has been sought by pressing AS /
PS
MODE BUTTON
Press # to switch to
TUNER (Radio)
CD
USB
SD
AUX (front input jack)
FORWARD and REVERSE BUTTONS
- In radio mode
# Push to change the station.
- In playback mode
# To change the track and / or forward-backward within a track.
EJECT BUTTON
- In playback mode
# CD eject.
USB / IPOD port
It connects automatically when you insert an iPod, hard drive or memory MP3
and WMA files. The iPod is recharged when it is below 50% load. If you connect
a hard disk must be formatted FAT16 or 32 (not NTFS or Linux).
Some hard drives require external power.
SD PORT
It connects automatically when you insert a SD card up to 32 GB. It may take a
few seconds to index the content before playing music.
BLUETOOTH
First pair the unit with your phone / iPhone. It Is made from the phone itself, in
the bluetooth setup menu. Toggle the visibility to all devices and to authorize
the connection before looking for devices. When you find the car unit, insert the
key 0000.
The drive connects automatically when it detects a phone ready. If no
connection is made, you can force it by holding the mode button / Phone.
A2DP. The drive can read music devices that support A2DP. Resorting to the
phone's manual for details.
AVRCP The unit can read music AVRCP compatible devices. Remote Control
Profile audio / video. Use the buttons 1 (play / pause), forward and reverse...
Compatible with Bluetooth V1.2, V2.0 EDR, HFP, A2DP, AVRP. Samsung,
Nokia, Panasonic, Sharp, Motorola, Philips, Sony Ericsson, Sagem, iPhone,
etc.
You can store 12 incoming numbers.
ANSWER / HANG UP
Press MODE to answer an incoming call.
Hold to reject it.
TRANSFER TO PHONE CALL PROCEEDING and vice versa.
During the call, so continued to press the MODE button. The call will continue
on the mobile or unit as appropriate.
Bluetooth MENU
Get the menu: at rest, hold the MODE button (green button with phone symbol).
Turn the volume button to choose
# L-DIAL (push mode re-enter) to access RECALL
# CALL LIST (click mode re-enter) to access recent calls by turning the volume
knob, mode Pulaar-enter again.
VOICE CALL
Get the menu: at rest, hold the MODE button (green button with phone symbol).
Turn the volume button to choose BT Voice. Press MODE again to hear a beep,
say clearly the name of the person. (Option valid as mobile models.)
CALL TO 3
During the call, press BAND to accept a second incoming call. The mode button
allows you to switch between calls. To reject one of the caller, press mode 2
seconds.
If you do not press any button, a second incoming call is put on hold if not
accepted or rejected in about 8 seconds.
Summary of the manual adaptation P.mdeSerdio (Madrid, SPAIN)
Table of contents
