HandFan HF352L User manual

HF352L

Mini Handheld Desktop Fan
Thank you for choosing our products.
Please read this instruction manual carefully before use
Safety guarantee and special design
1. Battery safety design: using PIC (positive temperature coefficient) and
CID (current interruption device),Prevent the battery from exploding.
2. Safe design for remote protection, using separate charging protection
circuit to prevent overcharging,Over-discharge, over-current, short
circuit to ensure life and safety
3. Input and charging safety design; use personal management
integrated circuit. Constant current charging design,Ensure safety and
explosion protection, extend battery life,
4. Output safety design: using fixed frequency to protect the motor from
damage. And guarantee Service life.
5. Creative turbo blades design,strong silent nature wind.
6. Motor lock protection to prevent the motor from burning out when
locked.
Fan, base, USB cable, manual.
Packing List

Model
Speed regulation
Output
Input
Battery specifications
Battery installation method
Charging time (H)
Size (mm)
Weight (g)
Working time (H)
HF352L
4 Speeds
2W
5V/1A
2000mAh
Unremovable
4h
145.1 x 68 x 34.8mm
96.3g
3-10H,first naturan wind:18H
Basic parameters
How to use
1. Press the power button to turn on first natural wind-second
wind-third wind and power off in turn. Long press the power
button to turn off the power at any wind mode.
2. Use a USB 5V for charging the fan(On charging: red light on;
full charged:green light on; on working:blue light on). 9V,12V
fast charger is not compatible.
3. If you store for a long time, please keep 80% of the power.
4.First natural wind working mode: stop every 5s for every
5s working.

Key Description
Indicator status description
Rest
Work
Work
Work
Work
Stop
Charge
Full charged
Work
First natural wind
Second Wind
Third wind
Fourth wind
Press once
Press once
Press once
Press once
Press once / long press
Steady red light
Steady green light
Blue light stays on
Light/Lights off
Fan leaf
Front cover
Base
handle
switch
Indicator light
Charging interface
Lanyard hole
1. Press the power button to turn on first natural wind-second
wind-third wind and power off in turn. Long press the power
button to turn off the power at any wind mode.
2. Use a USB 5V for charging the fan(On charging: red light on;
full charged:green light on; on working:blue light on). 9V,12V
fast charger is not compatible.
3. If you store for a long time, please keep 80% of the power.
4.First natural wind working mode: stop every 5s for every
5s working.

Indicator light
Charging interface
1. Do not touch the rotating fan blade with your finger. Children under
10 years old must use the fan under supervision of guardianship
2. Battery are unremovable, please do not extrude or disassemble
to avoid damage.
3. If you need to store the fan for a long time, please charge the
battery to 80% and store at dry and ventilated place.
4. Please take care of the fan, any press, falling down and conflicts
would cause damage, which will influence its performance.
5. Do not use the fan under environment over 60℃. Do not put the fan
into fair, which may lead to explosion.
6. Do not throw away or dispose the fan casualy, to avoid
environmental pollution.
Attention