Hanover HANAPEXSHD-GW User manual

Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
Quick & Easy Assembly
Ridge Reinforced Walls
9820007
Requires two people take at least 2-3 hours for installation
Overall Size: L89 x W153 x H178cm
Overall Size: L2.9 x W5 x H5.8 Feet

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .Please be aware: this unit takes two people
about one full day to complete.
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
3M
1/10"
1/5"
5/16"

PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.
sharp edges
when assembling or performing.
wear work gloves, long sleeves and eye glasses,
Pay attention to the sharp edges. Please

PART
NO. Qty.
S3 144
S2 90
1
PART
NO. Qty.
2
1
1
2
3
2
9
4
29
4
29-1
2
B1
2
13
1
4L
1
4R
4
30
1
31
1
32
1
33
1
34
1
20
2
15
17L
17R
2
2
1
Q
1
H
P1
P4
3
4
D1 2
P5
P6
2
2
20
260
28
F3
F1
F2
1
GB
H2 2
6
B6
J1 4
4
GC
GE 2
PART
NO. Qty.
2
GJ
W1 1
1355mm/53.34"
2
40 637mm/25.07"
2
41
752mm/29.6"
1394mm/54.9"
766mm/30.15"
572mm/22.51"
1583mm/62.3"
876mm/34.5"
760mm/29.92"
1583mm/62.3"
1583mm/62.3"
1583mm/62.3"
876mm/34.5"
760mm/29.92" #8AB-18x2/13
#8-32x2/13
#8-32x2/13
114mm/4.48"
1600mm/63.99"
766mm/30.15"
1600mm/63.99"
1582mm/62.28"
760mm/29.92"
1600mm/63.99"
1600mm/63.99"
760mm/29.92"
637mm/25.07"
1394mm/54.9"

1
1
2
3
J1
J1
9
9
13
13 B1
B1
Q
H
4L
4R
P1
P1
P1
P4
P4
P4
P4
20
P6
P5
P6
P5
15
15
17L
17R
17L
17R
GE
GE
GC
GC
GC
GC
GJ
GJ
J1
J1
W1
40
40
41
41
B6
29
29
29
29
29-1
29-1
29-1
29-1
D1
30
30
30
30
31
GB
34
33
32
H2
H2
B6
B6
B6
B6
B6
D1

When diagonal measurements are
F1
-6-
1
PART
NO. Qty.
2
1
1
2
3
2
3
1
1
PART
NO. Qty.
J1 4
F1
1、
equal,the frame is square.
2、The Floor Frame must be
BOTH square AND level or the
holes will not line up properly.
J1
J1
3
F1 8
F1 16
Base Assembly
Anchor Installation
Inspection

Left Side Wall Panel Installation
-7-
PART
NO. Qty.
F1
S3
P4 1
PART
NO. Qty.
P1 3
F1
S3
F2
S3
PART
NO. Qty.
P4 1
F1
S3
F2
S3
3
3
3
P4
P1 P1 P1
P4
F1 3
S3 3
F1 12
S3 15
F2 3
F1 4
S3 5
F2 1
Right Side Wall Panel Installation
Back Wall Panels Installation

-8-
F1
S3
PART
NO. Qty.
P4 1
PART
NO. Qty.
P4 1
F1
S3
F2
S3
F1
S3
F1
S3
F2
S3
PART
NO. Qty.
1
4L
1
4R
F1 S3 F1
F1 S3
F1
S3
F2
4L
4R
3
3
3
P4
P4
F1 4
S3 5
F2 1
F1 4
S3 5
F2 1
F1 4
S3 4
F2 2
Door Posts Installation

-9-
PART
NO. Qty.
2
9
S3
F1
9
9
9
PART
NO. Qty.
1
Q
F1
F1
S3
Q
PART
NO. Qty.
1
HH
F1
F1
S3
F1
2
GJ
H
GJ
F1 14
S3 14
F1 4
S3 4
F1 19
S3 15
Left and Right Upper Beam Installation
Triangle Panel Installation
Back Upper Beam Installation
Tools Hook Installation
Front Tri-angle Panel Installation

Roof Beam Installation
Roof Beam Assembly
-10-
PART
NO. Qty.
2
13
F1
13
13
PART
NO. Qty.
2
B1
F1
F1
F1
S3 F1
S3
PART
NO. Qty.
P5
P6
1
1
B1
B1
13
F1
S3
P5
P6
F1 4
F1 12
S3 8
F1 14
S3 14
Roof Panels Instllation

-11-
PART
NO. Qty.
P5
P6
1
1
P5
P6
F1
S3
PART
NO. Qty.
1
20
17L
17R
2
217R
17L
17R
17L
20
F1
F1
S3
PART
NO. Qty.
4
GC
GE 2
2
15
17L&17R
GC
F1
F1
GE
GE
GE
GC
GC
GC
GC
15
15
20
F1 14
S3 14
F1 4
F1 10
S3 4
Roof Cover Installation
Eaves and Plastic Ends
Installation

-12-
PART
NO. Qty.
4
29
4
29-1
4
30
29
29-1
30
x4
F1
PART
NO. Qty.
D1 1
1
31
1
32
32
31
D1
F2
S3
F1 S3
F2
S3
32 31
D1
F1 32
S3 2
F2 2
PART
NO. Qty.
S3 14
F2 2
F1 12
Corner Connector Installation
Door Panels Connection
Door Panels and Frames Assembly

Right Door Panels and Frames Assembly
PART
NO. Qty.
D1 1
1
33
1
34
F1 S3
F2
S3
34
33
D1
F2
S3
34 33
D1
-13-
PART
NO. Qty.
1
40
1
41
3
B6
F3
40
41
S3 2
F2 2
F3 6
F1 16
PART
NO. Qty.
S3 14
F2 2
F1 12
Reinforcement Installation
and Screws Tightening.
Right Door Panels Connection
Turn to Opposite

Locker and bolts Installation
(uninstallation right now)
-14-
PART
NO. Qty.
1
GB
H2 2
F1
F1
F3
GB
H2
H2
PART
NO. Qty.
1
40
1
41
3
B6
F3
40
41
F1 8
F3 12
F3
F1
6
16
Reinforcement Installation
and Screws Tightening.
Doors Installation
Turn to Opposite

-15-
PART
NO. Qty.
W1 1
1355mm
W1
3
W1
Fundation Installation