Hapton Bay WALLA HDP11259T20 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this table lamp. We
strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing Hampton Bay!
Item # 000 000
Model # HDP11259T20
USE AND CARE GUIDE
WALLA TABLE LAMP
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM

2
Table of Contents
Table of Contents ..................................2
Safety Information.................................2
Warranty.................................................2
Pre-Assembly ........................................2
Planning For Successful Assembly ............ 2
Package Contents ...................................... 3
Assembly................................................4
Care and Cleaning ................................6
Troubleshooting ....................................6
Safety Information
IMPORTANT: Inspect the wire insulation for
any cuts, abrasions, or exposed copper that
may have occurred during shipping. If there is
a defect in the wire, do not continue the
assembly process. Please call our Customer
Service Team at 1-877-527-0313.
Consult a qualified electrician with any electrical questions you may have.
Warranty
The manufacturer warrants this portable lamp to be free from defects in materials and workmanship for a period of
one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be defective, the manufacturer's only obligation,
and your exclusive remedy, is the repair or replacement of the product at the manufacturer's discretion, provided
that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or
mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or
used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a
failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any
other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion
of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer
does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular
purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not
be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs
involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.hamptonbay.com.
Pre-Assembly
PLANNING FOR SUCCESSFUL ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a
soft, non-abrasive surface such as carpet or
cardboard. Inspect each part for defects that may
have occurred during shipping.
Keep your receipt and these instructions for proof of
purchase.
NOTE: You may use a 23-Watt CFL bulb
(included) or a 100-Watt maximum standard
Type A bulb (sold separately).

3 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Finial 1
B Washer 1
C Shade 1
D Harp 1
E Socket assembly 1
F Lamp body 1
G 23-watt CFL bulb 1
B
A
C
D
G
E
F

4
Assembly
1Connecting the socket
assembly to the lamp body
□Pull the excess power cord through the base (F).
□Fasten the socket assembly (E) on to the lamp
body (F).
2Connecting the harp to the
socket assembly
□Squeeze the ends of the harp (D) together and
insert into the prongs of the socket assembly (E).
E
F
E
D

5 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
3Installing the light bulb
□Install a 23-Watt CFL bulb (G) (included) into
the socket assembly (E).
NOTE: You can also use a 100-Watt maximum standard
Type A bulb (sold separately).
4Installing the shade
□Place the shade (C) onto the harp (D).
□Attach the washer (B) onto the top of the harp (D).
□Fasten the finial (A) onto the top of the harp (D).
E
G
B
A
D
C

6
Care and Cleaning
□Use a dry, soft cloth to dust or wipe carefully.
□Do not clean with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem Possible Cause Solution
The bulb will not light. The bulb is burned out. □Replace the light bulb.
The power is off. □Ensure the power supply is turned on.
The cord is not plugged in. □Ensure the cord is plugged into an outlet.
The circuit breaker is off. □Ensure the circuit breaker is set in the On
position.
The fuse blows or a circuit
breaker trips when the light is
turned on.
There is an exposed wire. □Discontinue use of the lamp.
□Unplug the unit from the wall.
□Contact a qualified electrician or call the
Customer Service Team at 1-877-527-
0313.

7 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
This page intentionally left blank

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.