Harrod Sport SHE-300 User manual

INS041
Revision 1
17/07/18
Harrod UK Limited©
Pack Contents
SHE-300 - 2.4m Freestanding Team Bench
Team Bench Fittings Pack (FPK301)(contains)
6. 6 x M8 Nylock Nut BZP (BOL402)
7. 6 x M8x25mm Set Screw S/S (BOL540)
8. 12 x M8 Skiffy Washer (BOL722)
1. 3 x Team Bench Seat Support (PEQ367)
2. 1 x Team Bench Seat Frame (PEQ378)
3. 2 x 2.4m Team Bench Seat Slats (PLP630)
4. 1 x Team Bench Fittings Pack (FPK301)
5. 6 x M8x60 Skt Button Head Screw (BOL497)
6. 6x M8 Nylock Nut BZP (BOL402)
9. 1 x 5mm Allen Key (BOL794)
10. 12 x M8 Nut Cap (CAP951)
Page 1
Code:
Product:
6
View of Product
9
8
7
Fittings
IMPORTANT PLEASE READ THE
ASSEMBLY INSTRUCTIONS
CAREFULLY BEFORE STARTING
TOASSEMBLEYOUR SEATS
Tools Required
2x 13mm Spanner
1x 5mm Allen Key (Supplied in FPK301)
2
1
3
10
SHE-300
2.4m Freestanding Team Bench

Page 2
Code:
Product:
Assembly Instructions
1Lay the Frame (2) upside down in order to attach the Seat Supports (1) as shown in Fig 1a. Secure with Two M8x25mm
Set Screws S/S (7), Two M8 Skiffy Washers(8) and Two M8 Nyloc Nuts (6). Cover with the M8 Nut Cap (10)
2Align the Seat Slats (3) with the corresponding holes in the Seat Support Frame (2) as shown in Figure 2a. Secure the
slats in place using the fasteners that were supplied with the pre-fitted slats. Cover with the M8 Nut Cap (10)
Fig. 1
2
5
6
10
8
10
8
6
7
Fig. 1a
Fig. 2
Fig. 2a
Please note: Remove bolts from the pre-
assembled seat slats before fitting the
supports.
SHE-300
2.4m Freestanding Team Bench