Forever Redwood GARDEN ARBOR BENCH User manual

ASSEMBLY INSTRUCTIONS FOR THE
GARDEN ARBOR BENCH
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
GARDEN ARBOR BENCH
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
7
Drawing
Description
Posts
Lateral Trellis Walls
Back-Trellis Wall
Seat
Supports
Knee Braces
Slats
Qty.
4
2
1
1
2
4
Will
Vary
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
GARDEN ARBOR BENCH
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
Drawing
Description
5/16´´ X 4 ½´´ Bolts
(To attach the trellis walls to the posts. / To
attach the seat to the posts. / To attach the
front-knee braces to the posts).
3/8´´ X 6 ½´´ Bolts
(To attach the seat to the posts. / To attach
the back-knee braces to the posts).
5/16´´ X 3´´ Bolts
(To attach the supports to the posts. / To
attach the knee braces to the supports).
8´´ X 3´´ Deck Screws
(To attach the slats to the supports).
Note: Dimensions of your hardware will vary depending on size.

P| 3
GARDEN ARBOR BENCH
www.ForeverRedwood.com
No.
.
1
2
3
4
5
6
7
DESCRIPTION
Posts
Lateral Trellis Walls
Back-Trellis Wall
Seat
Supports
Knee Braces
Slats
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
GARDEN ARBOR BENCH
www.ForeverRedwood.com
Step 1: Attach the lateral trellis walls (2) to the posts (1) with 5/16´´ X 4 ½´´ bolts (A). Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
Step 2: Use 5/16´´ X 4 ½´´ bolts (A) to attach the back-trellis wall (3) to the posts. Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
2
5/16´´ X 4 ½´´ Bolts
2
1
5/16´´ X 4 ½´´ Bolts
3

P| 5
GARDEN ARBOR BENCH
www.ForeverRedwood.com
Step 3: Attach the seat (4) to the posts with 5/16´´ X 4 ½´´ bolts (A) and 3/8´´ X 6 ½´´ bolts (B). Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
Step 4: Use 5/16´´ X 3´´ bolts (C) to attach the supports (5) to the posts. Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
3/8´´ X 6 ½´´ Bolts
5/16´´ X 4 ½´´ Bolts
4
5
5
5/16´´ X 3´´ Bolts

P| 6
GARDEN ARBOR BENCH
www.ForeverRedwood.com
Step 5: Attach the back-knee braces (6) to the support with 5/16´´ x 3´´ bolts (C) and to the posts with 3/8´´ x 6 ½´´ bolts (B).
Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 6: Attach the front-knee braces (6) to the support with 5/16´´ x 3´´ bolts (C) and to the posts with 5/16´´ x 4 ½´´ bolts (A).
Each part has a series of numbers that indicate where to attach the part with the corresponding number.
6
5/16´´ X 3´´ Bolts
3/8´´ X 6 ½´´ Bolts
6
6
5/16´´ X 4 ½´´ Bolts
6
5/16´´ X 3´´ Bolts

P| 7
GARDEN ARBOR BENCH
www.ForeverRedwood.com
Step 7: Finally, use 8´´ x 3´´ deck screws (D) to attach each slat (7) to the supports. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
7
8´´ X 3´´ Deck Screws

P| 8
GARDEN ARBOR BENCH
www.ForeverRedwood.com
This completes the Arbor Bench assembly. Hope you enjoy your set for many decades. If you ever have a problem or a
question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.