Harrod UK FBL-850 User manual

ASSEMBLY INSTRUCTIONS
i
i
*Goal and Net sold separately
2 people are recommended for this assembly
Estimated 60 minutes assembly time per goal (not including time for concrete)
INS853
Revision 0
04/07/2016
FBL-850
Stadium Pro Freehanging Net Supports-3Post
60
mins
IMPORTANT: Please read these assembly instructions carefully before
starting to assemble your Freehanging Net Supports
IMPORTANT: mustThe sockets be installed in a minimum of 0.6m of
concrete. Consult a construction engineer for advice where required
3

Pack Contents
Page 1
Code
Product
FBL-850
Stadium Pro Freehanging Net Supports-3Post
1.
x6
FEP833
Stadium Pro F/Hang Net Supports
1. Stadium Pro F/Hang Post
7.
x4
BOL739
2. M10 Nyloc Nut
3. M10x40mm Bolt
4. M10x25mm Square Screw
5. M10 Handwheel
6. M10 Washer
7.
9. Top
10.
11.
12. Mid Post Strap Bracket
13. Strap
14. Socket Drop-in Lid
15. Socket
16. Winch
18. Security Wire*
* parts not shown
M10 Nylon Spacer
8. Carbine Clip
Strap Bracket
Security Wire Bracket
Winch Bracket
17. 3 Post Headline*
** parts are not to scale
Fittings Pack Contents
2.
x18
BOL202
3.
x4
BOL321
4.
x22
BOL336
5.
x4
BOL399
6.
x18
BOL709
17mm
6mm
Tools Required
17mm Spanner
6mm Allen Key
Spirit Level
Optional Extras
FBL-848
FBL-851
Stadium Pro Goal
Stadium Pro Hinged Net Support
FBL-308 4mm Box Net

Fittings Pack Contents
i
Code
Product
FBL-850
Stadium Pro Freehanging Net Supports-3Post
Page 2
Fittings Pack (cont.)
2. M10 Nyloc Nut
3. M10x40mm Bolt
4. M10x25mm Square Screw
5. M10 Handwheel
6. M10 Washer
7. M10 Nylon Spacer
8. Carbine Clip
9. Top Strap Bracket
10. Security Wire Bracket
11. Winch Bracket
12. Mid Post Strap Bracket
13. Strap
14. Socket Drop-in Lid
15. Socket
16. Winch
17. 3 Post Headline*
18. Security Wire*
* parts not shown
** parts are not to scale
IMPORTANT: Please quote
part numbers when ordering
replacement parts
16.
x6
WIN006
12.
x2
PEP885
14.
x6
WEQ325
13.
x6
STR845
15.
x6
WEQ364
11.
x6
PEP846
9.
x4
PEP842
10.
x4
PEP844
8.
x4
HKS008
Additional Parts (sold separately)
19. Goalposts
20. Net
21. Cable Ties

Page 3
Socket Installation
1° 3°
600mm
600mm
Ground Level
Code
Product
FBL-850
Stadium Pro Freehanging Net Supports-3Post
IMPORTANT: must away
must away
Outside sockets be leant back 3° diagonally
from the goal. The centre socket be leant back 1° from goal
as indicated by the arrows above
i
OUTSIDE SOCKETSCENTRE SOCKET
IMPORTANT: Consult a construction engineer for advice where
required. Ensure concrete has fully hardened before proceeding with
your assembly
i
1.08m
1Dig holes at a 600mm and concrete in Sockets (15), leaving 40-100mm from top of
concrete to ground level
minimum 3
15
PLAN VIEW
9.422m
4.711m
1m
19
40-100mm
Drainage Hole

Page 4
Assembly Instructions
Code
Product
FBL-850
Stadium Pro Freehanging Net Supports-3Post
OUTSIDE POSTS CENTRE POST
9
2
612
4
16
10
5
3
7
TOP OF POST
17mm
6mm
IMPORTANT:
only
The Security Wire is to be used on the outside posts
. Please pay attention to the instructions below for each post
i
11
11
6
2
HINT: Place Winch and Security Wire Bracket at a comfortable height
on the Post. These can be adjusted later during the assembly
1

Page 5
Code
Product
FBL-850
Stadium Pro Freehanging Net Supports-3Post
3Outside post only:
one
Attach Security Wire (18) to a Carbine Clip (8) and connect to the Security Wire
Bracket on of the outside Posts. Feed Wire around the Winch, behind the Strap and through
both loops in the Strap Bracket
912
16
13
2Thread Strap (13) through the larger loop in the Strap Bracket (9/12) and feed into the slot in the
Winch (16). Operate Winch until Strap has passed around the hub and will slip when pullednot
18
8
9

Page 6
i
Code
Product
FBL-850
Stadium Pro Freehanging Net Supports-3Post
13
5Attach outside carbine clips to the corner mesh
17
IMPORTANT: Discard the Headline Rope that is packed with the net
4Insert Posts in Sockets and attach one end of Headline (17) to a Strap. Thread Headline through
corner of Net (20), out opposite corner and attach to Strap on opposite Post. Connect the two centre
ropes to the middle Post
17
20
19

Page 7
Code
Product
FBL-850
Stadium Pro Freehanging Net Supports-3Post
6Evenly tension the Headline from the outside Posts . Thread Security Wire through Net, through
both loops in the Strap Bracket on the opposite Post and connect to the Security Wire Bracket.
Distribute the Security Wire evenly between the outside Posts
only
21
20
17
7Remove any sag from the roof of the Net. Secure the top edge of the Net to the Headline and
Security Wire using the Cable Ties (21) supplied. Fasten Cable Ties by each knot and cut off excess
for minimal visibility. Tension the middle Post then the Security Wire to complete the box shape
18
18
18
10
8
18
10
WARNING: Do not overtension the system as this can
result in damage to the product
!