Hasbro Digital Video Camera VcamNow 2.0 User manual

FCC STATEMENT
This device complieswith
part 15of the FCC Rules. Operationis subject to
the followingtwo conditions: (1) This device may not cause harmfulinter-
ference, and
(2) thisdevice mustaccept any,@terferencereceived, includ-
inginterferencethat may causeundesiredo-tion.
Whing: Changesor modificationstothis u& not expresslyapproved
bythe partyresponsiblefor compliance could voidthe user's authorityto
operatethe equipment.
This equipment has beentested and foundto comply with the limits for a
Class
B digitaldevice, pursuantto Part 15of the FCC Rules. These limits
are designedto providereasonableprotectionagainst harmful interference
ina residentialinstallation. This equipmentgenerates, usesand
can radiate
radiofrequency energy, and,
if not installedand usedinaccordancewith
the instructions, may
cause harmful interferenceto radio communications.
However, there is no guarantee that interferencewill not occur in a particu-
lar installation. If this equipment does cause harmfulinterferenceto radioor
television reception, which
can be determined by turningthe equipmentoff
and on, the user isencouragedto try to correct the interferenceby one or
moreof the following measures:
- Reorient or relocatethe receiving antenna.
- Increasethe separation between the equipment and the receiver.
- Consultthe dealer or an experiencedradio/N technicianfor help.
Shieldedcables must
be usedwith this unit to ensure compliance with the
Class B FCC limits.
Ifyou have any questions, please contact:
ConsumerAffairs
Hasbm, Inc.
1027 NewportAvenue.
Pawtucket, RI
Tel: [phone]
Fax: [phone] ELECTRONICS TIGEim
mns~rmoloovcarr*to~.vl~ rn
Product and colors may vary.
O 2006 Hasbro. All RightsReserved.
TM & 03 denote U.S. Trademarks.
76348 PN 6581780000 Questions? Call: 1-800-327-8264
mUCK START WIDE
To start using your Digital Video Camera, follow these simple steps.
See the main user guide on CD for the full documentation for the
VCAMNOW 2.0. It is installed on your computer as part of the
installation process. To read the complete user guide, pleasego to
Start
-> Programs -> VCamNow 2.0 -> User Guide.
* VCAMRIW 24 Diil Video
softwad IwtalI*q1Q.
USBGabh. '\ ,;',

Open cover. Insert 2 x 1.5V
"AA" or R6 size batteries (not
a CAUTION: TO AVOID BATTERY LEAKAGE
1. Be sure to insert the batteries correctly and
always follow the toy and battery manufacturers'
2. Do not mix old batteries and new batteries or
alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries;
3. Always remove weak or dead batteries from the
IMPORTANT: BATTERY INFORMATION
Please retain this informationfor future reference.
Batteries should be replaced by an adult.
-1
h CAUTION:
1. Always follow the instructions carefully. Use only
batteries specified and be sure to insert item
correctly by matching the
+ and - polarity markings.
2. Do not mix old batteries and new batteries or
standard (carbon-zinc) with alkaline batteries.
3. Remove exhausted or dead batteries from the
product.
4. Remove batteries if product isnot to be played with
for a long time.
5. Do not short-circuit the supply terminals.
6. Should this product cause, or be affected by, local
electrical interference, move itaway from other
electrical equipment. Reset (switching off and back
on again or removing and re-inserting batteries) if
necessary.
7. RECHARGEABLE BATTERIES: Do not mixthese with
any other types of batteries. Always remove from
the product before recharging. Recharge batteries
under adult supervision. DO NOT RECHARGE OTHER
TYPES OF BATTERIES.

1. Press he
bulton untilyou me the camwa .con appear on
I the LCDQnder.
EXPOSURE A
I
2..To set the resolution of your picture, press 6. to switch between
2048 x 1536, 1600 x 1200or 640 x 480.
3. Press the Zoom button, T or W, to adjust the frame of your
picture.
I 4. Press W to tab a picture.
HOW TO REVIEW A PICTURE
2. Press the T or W on the Zoom buwon to previewone picture or
multiple pictureson the LCD/Viewfinder.
3. Press a or @) to select the picturethat you want to view.
'
NOTE: If ou have an MMC/SD Card inserted (not included), your
picturewii
be automalically stored to theMMC/SD Card, not the internal
,
memory and will be reviewed from his location. If you want to take
ictures and review them from the internal memory only, remove the
! h C/SD Card.

A !!!!c!E:!JLs into the default
DCIM11 @@Mediafolder ofthis camera or
try to rename the files in this folder.
If you do, the camera may haue a problem reading
the memory card and insome cases the camera
may not operate.normally.Therefore we strongly
recommendyou to moue your images toyour hard
disk beforeany change.
The equipment is to be suppliedfrom an
idemtified USB port complying with the
requirementsofLimitedPowerSource.
82-000-02010