Hayter Harrier 41 Electric User guide

Harrier 41
Original Version (EN)
Issued: 04/04/2016 From Serial Number: 316000101 Onwards Part number: 3404-981 Rev A
OWNER’S HANDBOOK
Code 414H
70th Anniversary Platinum Limited Edition

CONTENTS
3
Introduction 4
Safety Compliance 4
Main Features 5
Specifications 5
Safety Symbols 6
Safety Precautions 7 - 8
Safety Alert Symbol 7
Training 7
Preparation 7
Operation 7 - 8
Maintenance & Storage 8
Transport 8
Spare Parts 8
Assembling the Mower Before First Use 9
Delivery Checklist 9
Handlebar 9
Grassbag Assembly 9
Grassbag Attachment 9
Prevent Engine Damage 9
Oil Type 9
Check Oil Level 9
Operating the Mower 10 - 12
Fuel Type 10
Controls 10
Before Mowing 10
Starting 10
Forward Travel 11
Reverse Travel 11
Parking 11
Turning 11
Stopping 11
Slopes 11
Height of Cut 11
Non Grassed Areas 11
Grassbag 12
Collection Without Grassbag 12
Heavy Growth 12
Friction Disc 12
Engine Detail 12
Mower Maintenance 13 - 16
Carburetor Adjustments 13
Oil Service 13
Air cleaner Service 13
Spark Plug Service 13
Keeping Engine Clean 14
Grassbag 14
Rear Deflector 14
Deck Housing 14
Securing Nuts & Bolts 14
Clutch Cable Adjustment 14
Lubrication 15
Cutterblade Removal 15
Cutterblade Assembly 15
Cutterblade Sharpening 15
Blade Brake Test 15
Storage 16
Maintenance Schedule 17
Lawn Care Calendar 18
Trouble Shooting 19
Warranty 20
EU Privacy Statement 21
Notes 21 - 22
Service Records & Customer Information 24

INTRODUCTION SAFETY COMPLIANCE
4
Thank you for purchasing a Hayter mower.
The following pages are designed to help you gain safe and efficient service from your machine.
ThisOwner’sHandbookshouldberegardedaspartofthemowerasitgivesessentialinformation
regarding safety, operation, maintenance and specifications.
If you misplace your Owner’s Handbook, contact your local Hayter authorised dealer for a
replacement. Alternatively, visit www.hayter.co.uk/handbooks to download an electronic
version.
For engine details related to your product, please refer to the engine handbook provided.
To ensure maximum safety, best performance, and to gain knowledge of the mower, it is
essential that you and any other operator read and understand the contents of this handbook
before the engine is started. If you are unsure of any procedure detailed in this Handbook then
please contact your local Hayter dealer for assistance.
Pay particular attention to the safety alert symbol which means Caution, Warning, or Danger.
Read and understand the instruction as it is relates to safety.
Improper maintenance or use of this mower can result in injury.
To reduce the potential for injury, comply with these safety instructions. This mower should
be operated, serviced and repaired only by persons who are familiar with its particular
characteristics and who are acquainted with the relevant safety procedures.
Throughout this handbook all references to left and right are as viewed from behind the
handlebar, in the direction of forward travel.
This machine has been designed in accordance with EN ISO 5395.
Hayter Limited have designed and tested this machine for reasonably safe service; however,
failure to comply with the instructions in this handbook may result in personal injury.
This mower is designed solely for use in a domestic grass cutting environment. Use in any other
way is considered as contrary to the intended use.
Please be advised that the illustrations in this Handbook are generic and not specific to your
product.
Hayter Limited reserves the right to amend product specifications without prior notification.
To ensure low noise and vibration levels, carry out the following procedures correctly:
• To prevent overloading the engine, use the correct height of cut and ground speed.
• Follow the recommended maintenance instructions.
VIBRATION INFORMATION
Hand / Arm Vibration Level at the Operator Position measured in accordance with European
Standard EN ISO 5395:2013. Model 414
Measured Vibration Level ahw 5 ms-2
Uncertainty of measurement K 1.5 ms-2
SOUND PRESSURE INFORMATION
Sound Pressure Level at the Operator Position measured in accordance with European
Standard EN ISO 5395:2013. Model 414
Measured Sound Pressure Level LpA 83 dB (A)
Uncertainty of measurement K 2 dB (A)
SOUND POWER INFORMATION
Sound Power Level measured in accordance with European Standard EN ISO 5395:2013.
Model 414
Measured Sound Power Level LwA 96 dB (A)
Uncertainty of measurement K 1 dB (A)
For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk

5
MAIN FEATURES SPECIFICATIONS
123
45
6
7
8
9
10
11
12
13
14
15
16
17
Code 414
Weight 36.5 kg
Length 1400 mm
Width 460 mm
Height 1035 mm
Width of Cut 41 cm
Height of Cut 13 - 60 mm
Cutterblade Speed 2750 rpm
Engine Briggs & Stratton
Engine Type Series 650
Engine Power Rating (Net) 2.4 kw
Fuel Type* Unleaded petrol
Fuel Capacity 1.5 litre
Oil Type SAE 30 engine oil
Oil Sump Capacity 0.6 litres
* Aminimum of 87 octane / 87 AKI (91 RON).
* Petrol with up to 10% ethanol is acceptable.
* Do not use unapproved fuels, such as E15 and E85
1. Spark plug and lead 10. Handlebar
2. Engine cover 11. Ground drive clutch lever
3. Air cleaner 12. Variable speed control*
4. Fuel shutoff valve 13. Grassbag assembly
5. Oil filler and dipstick 14. Rear deflector
6. Serial number label (not shown) 15. Height of cut adjuster
7. Handlebar securing knob 16. Fuel tank and filler cap
8. Engine start-grip 17. Exhaust guard
9. Engine stop lever
*WARNING: Item 12 should only be operated whilst the engine is
running or the cable will be damaged.