Heston Blumenthal Sage Boss To Go Grind & Mill User manual

the Boss To Go™ Grind & Mill
Instruction Book - BPB003

Assembly
BEFORE FIRST USE
• Before using your Boss To Go milling
attachment for the first time, remove any
packaging material and promotional labels.
• Be careful when handling the blades as they
are extremely sharp.
• Wash the cup, lid and blade assembly in
warm soapy water with a soft cloth. Rinse and
dry thoroughly.
ASSEMBLY
1. Remove blades and position the cup with
opening facing up.
2. Add ingredients avoiding filling past the
MAX line.
3. Fix the blade assembly in place with
a quarter turn in the clockwise direction.
Ensure the blade assembly collar is securely
in place before inverting the cup to blend.
Hints & Tips
• Never blend hot (or even warm) ingredients.
The blades form a seal with the cup, and there
is no venting for steam to be released.
• We recommend not blending longer than
1 minute at a time. Ingredients in the cup may
become warm and cause internal pressure on
the seals making it difficult to open or splatter
ingredients when opened. Allow to cool and
take care when opening.
• The milling/grinding attachment is for use
with dry ingredients only.
• Hard ingredients such as cassia bark, star
anise, whole clove and dry corn kernels
should not be blended as they may damage
the blades.
• Do not mill/grind continuously for more than
30 seconds at a time. Allow the motor to rest
and the metal grinding attachment to cool for
30 seconds before continuing.
• Run the blender only for the appropriate
amount of time required – do not over blend
ingredients.
• Ingredients can be pulsed by twisting the
cup to engage and disengage the motor as
needed. This will help ingredients circulate.
• Do not exceed the maximum mark when
adding foods into the cup.
• To stop blending at any time, rotate the cup
anti-clockwise to disengage the motor.
• The surface of the stainless steel grinding
cup may become too hot to touch if grinding
for longer than 30 seconds. Detach from base
by holding the plastic collar.

Care & Cleaning
Unplug the power cord from the power outlet
after use for safety reasons.
To keep your cup and lid clean, avoid allowing
food residue to dry on them.
Follow these steps as soon as possible after use:
• Rinse most of the residue off the blades,
cup and lid.
• Hand wash in warm, soapy water using a mild
liquid detergent and non-abrasive sponge.
Cleaning agents
Do not use abrasive scouring pads or cleansers
on either the motor base or the cup, as they
may scratch the surface. Use only warm soap
water with a soft cloth.
Pressurisation
The cup may be rinsed by adding cold water,
attaching blades, and either blending or
shaking by hand for 10 seconds.
IMPORTANT: There is a risk of pressurisation
from hot water and/or detergent.
When rinsing by attaching blades and
blending/shaking, never add hot or even
warm water, as the steam produced can create
dangerous pressurisation of steam.
Do not add detergent, as the foam produced
will expand and may cause pressurisation.
Dishwasher
The cup, lid and blade assembly may be
washed in the dishwasher on the top shelf only.
Stubborn food stains and odours
Strong smelling and some vegetables such as
carrots may leave an odour or stain the blades,
cup or lid.
To remove, pour warm soapy water and fill to
the MAX mark. Set aside to soak for 5 minutes.
Then wash with a mild detergent and warm
water, rinse well and dry thoroughly. Store cup
with lid off.
Do not attach blades when washing with
detergent.
Storage
Do not store with the cup turned to the ON
position, as this means the motor is engaged
and will turn on immediately when plugged in
or switched on at the wall.

www.sageappliances.co.uk
[e-mail]
Registered in England & Wales No. 8223512. Due to continued product improvement, the products illustrated or photographed
in this document may vary slightly from the actual product.
Copyright BRG Appliances 2015.
BPB003 UKM – A15
Register your product and get more
from your purchase
Product registration takes only a few
minutes and ensures a record of your
purchase. Registration also makes
it easier to get support and advice
on any questions or issues that you
might have in the future. If you wish,
we can also send you free recipes and
additional hints and tips on making
the best of your appliance.
Go to www.sageappliances.co.uk
and click on ‘Product Registration’.
What’s on your mind?
Our constant aim is to improve the
quality and features of our appliances.
We welcome your comments and ideas
in assisting our ongoing development.
Go to www.sageappliances.co.uk
and click on ‘Support’.
Freephone (UK Landline): 0808 178 1650
Mobile Calls (National Rate): 0333 0142 970
Sage®by Heston Blumenthal®