HIOS T-80BL User manual


For DC Screwdrivers Power Supply
T-45BL /T-70BL /T-80BL

Operation Manual
WT-A015 22A
T-70BL
ROTATION POWER
POWER SUPPLY
HIOS Inc. JAPAN
1
2
I
ON
OFF
HIOS
JP
EN
I
POWER SUPPLY
HIOS Inc. JAPAN
ROTATION POWER
T-80BL
HIOS
OFF
ON
2
1

2
JP
安全にお使いいただくために


設置について
󱾀

󱾀
󱾀


󱾀
取り扱いについて
󱾀

󱾀
󱾀
󱾀

󱾀

  



󱾀
󱾀
󱾀

󱾀

󱾀


3
JP
付属品

   
 
各部の名称とはたらき


  
  
  
󱳛
󱳝
󱳣
󱳡
󱳟
T-70BL
ROTATION POWER
POWER SUPPLY
HIOS Inc. JAPAN
1
2
I
ON
OFF
HIOS
２
１
I
ON
O
OFF
ROTATION
POWER
󱳛 
󱳝
󱳟
󱳡
󱳣
T-45BL T-70BL T-80BL
2
1

4
JP
対応ドライバー一覧 
T-45BL
 






 



 



 
 
T-70BL
 
 





 






 
 
T-80BL
 







 


5
JP
固定用金具を取り付ける


T-45BL T-70BL T-80BL
設置例

6
JP
おもな仕様
  

 
 
 

 
  

146mm
71.5mm
42.6mm
210mm
88mm
52mm
  

 
 
  
 
 
  

210mm
116mm 55mm
 

 

7
EN
Important Safety Instructions
Before using this machine, read this section and follow the instructions to properly use
this machine.
Installation
󱾀The unit should be used in a temperature and humidity-controlled room.
Keep the unit away from a place with poor ventilation, in dust or metal pieces.
󱾀Do not place any objects on the unit.
󱾀The place to install the unit should be vibration-free and the unit should be securely fixed. If the
unit is installed on the wall or on a high place, make sure to use the attached Mounting Bracket to
fix it securely.
󱾀Do not install the unit close to high voltage equipments.
Handling
󱾀Install a leakage breaker and safety breaker on the input power source and connect the ground to
use the unit.
󱾀Connect to a power source of the specified voltage.
󱾀
Do not use with other drivers or devices except the models listed in this operation manual.
󱾀If the protection circuit works due to overheat, stop operation immediately, pull the power plug
from the outlet and send it back to your HIOS distributor for repair.
󱾀The unit may automatically stop in use when the protection circuit works due to overcurrent, etc.
Turn o the power switch once and turn it on in 5 seconds for restart.
If the unit stops while in screw fastening, make sure to check the torque of the fastened screw.
󱾀Do not disassemble or modify the unit.
󱾀Do not drop the power Supply or subject it to violent impact.
󱾀Do not drag the unit by its driver cord or AC cord. Keep the cords away from foreign objects, oil or
something sharp.
󱾀Make sure to grasp the plug section to disconnect the AC cord from the outlet.
󱾀
Turn the unit o and disconnect the AC cord from the outlet when the unit is not in use.
󱾀IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS.
󱾀DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. CAREFULLY FOLLOW THESE
INSTRUCTIONS.
Selection of Power Supply Cord:
Use in U.S.A. - Use UL Listed detachable power supply cord, No.18AWG,3 conductors, exible cord,
rated 10A, VW-1, 80°C, minimum 1.8m, maximum 3 m long. Provided with a molded-on, non-polarized
attachment plug with a 15A, 125V (NEMA5-15P) or 15A, 250 V (NEMA 6-15P) conguration and a
molded-on connector which mates with the Power Inlet.
The following exible cord type may be used: S, SE, SO, SP-3, SPT-3, ST,STO, SJ, SJE, SJO, SJT, SJTO, SP-2,
SPE-2, SPT-2, SV, SVE, SVT.
Use in countries other than U.S.A. - Use IEC60227 certied PVC exible power supply cord, marked
H03VVF or H05VVF, 3C x 0.75mm2, rated min. 10A, 250V

8
EN
Accessories
AC Cord (1.8m)
Parts and Their Functions
Back Side
Front Side
Model Mounting Bracket Screw
T-45BL 1pc 1pc
T-70BL/T-80BL 2pcs 4pcs
󱳛
󱳝
󱳣
󱳡
󱳟
T-70BL
ROTATION POWER
POWER SUPPLY
HIOS Inc. JAPAN
1
2
I
ON
OFF
HIOS
２
１
I
ON
O
OFF
ROTATION
POWER
󱳛Power Indicator: Lights up when the power switch is turned ON.
󱳝Connector for the Screwdriver: Connect the screwdriver cord.
󱳟DC Output Switch: 2 HI: DC30V/ 1 (LOW: DC20V)
󱳡Power Switch: Turns the power ON or OFF.
󱳣Connector for AC Cord: Connect the power cord.
T-45BL T-70BL T-80BL
2
1

9
EN
Compatible Screwdrivers (Including OPC/SS Type)
T-45BL
Series Model
BLG-BC2 BLG-4000BC2/BLG-4000BC2-LT/BLG-5000BC2/BLG-5000BC2-15*/BLG-5000BC2-HT*
BLG-BC1 BLG-4000BC1/BLG-5000BC1/BLG-5000BC1-15*/BLG-5000BC1-HT*
BLG-ZERO1 BLG-4000ZERO1/BLG-5000ZERO1/BLG-5000ZERO1-15*/
BLG-5000ZERO1-HT*
BLG BLG-4000/BLG-5000/BLG-5000-15*/BLG-5000-HT*
BL BL-2000/BL-3000/BL-5000/BL-5000-15*/BL-5020*
T-70BL
Series Model
BLG-BC2 BLG-4000BC2/BLG-4000BC2-LT/BLG-5000BC2/BLG-5000BC2-15*/
BLG-5000BC2-18*/BLG-5000BC2-HT*/BLG-7000BC2*
BLG-BC1 BLG-4000BC1/BLG-5000BC1/BLG-5000BC1-15*/BLG-5000BC1-18*/
BLG-5000BC1-HT*
BLG-ZERO1 BLG-4000ZERO1/BLG-5000ZERO1/BLG-5000ZERO1-15*/
BLG-5000ZERO1-18*/BLG-5000ZERO1-HT*
BLG
BLG-4000/BLG-5000/BLG-5000-15*/BLG-5000-18*/BLG-5000-HT*
BL BL-2000/BL-3000/BL-5000/BL-5000-15*/BL-5020*/BL-7000/BL-7000HT
T-80BL
Series Model
BLG-BC2
BLG-4000BC2/BLG-4000BC2-LT/BLG-5000BC2/BLG-5000BC2-15*/
BLG-5000BC2-18*/BLG-5000BC2-HT*/BLG-7000BC2*/BLG-7000BC2-GT
(-S, -HANDLE)*
*Use only 2(HI) power outlet with the *models. These models may not perform
properly on 1(LOW) power outlet.

10
EN
Attach the Mounting Bracket
Make sure to use the attached Mounting Bracket and the screw to x the unit securely
if you install it on the work table, the wall, etc.
T-45BL T-70BL T-80BL
Example

11
EN
Specications
Model Name T-45BL T-70BL
Primary
Side
Input Voltage AC100-240V 47-63Hz
Power
Consumption
45-78VA
Fuse capacity: 3.15A/250V
(Built-in)
40-65VA
Fuse capacity: 5A/250V
(Built-in)
Secondary Output Voltage HI(2): DC30V / LOW(1): DC20V (2-step switchable)
External Dimensions
146mm
71.5mm
42.6mm
210mm
88mm
52mm
Weight 320g 685g
Number of Connectable
Screwdrivers
1 unit
Model Name 
Primary
Side
Input Voltage AC100-240V 47-63Hz
Power
Consumption
65VA max.
Fuse capacity: T3A/250V (Built-in)
Secondary Output Voltage HI(2): DC30V / LOW(1): DC20V (2-step switchable)
External Dimensions
210mm
116mm 55mm
Weight 
Number of Connectable
Screwdrivers
1 unit

1-35-1 Oshiage, Sumida-ku Tokyo, Japan
HIOS Inc.
東京都墨田区押上 1-35-1

www.hios.com