HIRSCH H-5041 User manual

USER MANUAL H-5041
A . Features
 10 Digits LCD Display, Display Hour, Minute, Second, Date and week.
 Daily Alarm and Chime hourly
 12 / 24H format selectable
 1/100 second Chronograph with split functions
 EL backlight
 Without sun or light, the watch power come from the battery.
 In the sun or light source, the solar panel can accept solar / light power, and supply it to the watch for
work, no need battery power.
B . Operational Manual
（C Key） RESET
（ D Key） START
LIGHT（A K ey）
LMODE（B Key）
B Key B Key B Key
Real Time
Chronograph
Alarm Time setting

USER MANUAL H-5041
1. Real Time
 Press D key to convert 12/24 time, the screen shows "24H" when it is the 24hour mode.
2. Daily Alarm
 Turn On / Off Alarm and Chime: In Alarm mode ("Hour" and "Minute" do not flashing), press D key to
turn on/off the Alarm :( ) and Chime: ( ) in turn.
 The Alarm opening sign ( ) and the Chime opening sign ( ) are displayed in all function modes.
 Whatever function mode is currently displayed, the Alarm will ring for 20 seconds when it reaches the
preset time and the Alarm sign ( ) will flash during the Alarm.
 After turning on the Chime, sound ( BI BI) will be issued at every Chime hour.
 Alarm setting: Press C key to select "Hour" or "Minute" setting, Press D key to adjust the flashing item,
Press C key to confirm, Press B key to return to Real Time mode.
3. Chronograph
 The display range of the Chronograph is 59 minutes, 59.99 seconds.
 If the Chronograph is not stopped, even if the Chronograph function is exited, the test time will continue.
 If the Chronograph function is withdrawn, the halfway time will be cleared and the picture will return to
the time-lapse measurement screen when the halfway time is displayed in the screen.
 Press D key to Start/Stop running.
 When stop, press C key to zero.
 When running, press C key to split count.
 When press D key to exit split count.
 Press C key to Chronograph, that is to record the completion time of the first player.
 Then press D key to complete the measurement, record the completion time of the second players and
finally press C key to clear the record.
4. Time Setting
 “Second" flashing when loading, press D key to zero; Press C key to select item as following sequence:
Minute, Month, Day, Week.
 When running, press B key to return to Real Time Mode.