Hisense C1 User manual

Quick Setup Guide
Before using the Smart Mini Projector, please read this guide
carefully and keep it for future reference.
English

1
© 2023 Hisense Company Ltd. All Rights Reserved.
All material in this Quick Setup Guide is the property of Hisense Company
Ltd. and its subsidiaries, and is protected under US, CANADA, MEXICO
and International copyright and/or other intellectual property laws.
Reproduction or transmission of the materials, in whole or in part, in any
manner, electronic, print, or otherwise, without the prior written consent of
Hisense Company Ltd. is a violation of Hisense Company Ltd. rights under
the aforementioned laws.
No part of this publication may be stored, reproduced, transmitted or
distributed, in whole or in part, in any manner, electronic or otherwise,
whether or not for a charge or other or no consideration, without the prior
written permission of Hisense Company Ltd.
Requests for permission to store, reproduce, transmit or distribute materials
may be made to one of the following addresses:
U.S.A. Hisense USA Corporation
105 Satellite BLVD Suite I, Suwanee, GA 30024
MEXICO IMPORTER:
Hisense Mexico S. de R.L. de C.V.
Blvd. Miguel de Cervantes Saavedra No 301
Torre Norte Piso 2, Col. Ampliación Granada
Miguel Hidalgo, Ciudad de México, C.P. 11520
RFC: HME110512IY3
TEL: (52) (55) 5531-3515
CANADA
Hisense Canada Co., Ltd
2283 Argentia Road, Unit 16
Mississauga, ON, Canada
L5N 5Z2
Hisense, and any and all other Hisense product names, logo’s, slogans
or marks are registered trademarks of Hisense Company Ltd. and its
subsidiaries. All other trademarks are the property of their respective holders.

2
Because we value your business, we want to keep you in the know of 'all things Hisense'. Using your mobile phone, scan the Registration page QR code to
register your Device. Depending on the make and model of your phone, you may need to download a QR code scanning app.
U.S. Mexico Canada
http://www.hisense-usa.com/support/register https://hisense.com.mx/support/register http://www.hisense- canada.com/support/
productReg.asp
Register Your Device!
Disclaimer:
Subscriptions or other payments may be required to access content through some applications. Some or all of the included or downloaded application services
in this Hisense device may not function depending on the Internet connection, local limitations of included applications or other reasons outside of Hisense’s
control. HISENSE EXPRESSLY DISCLAIMS RESPONSIBILITY FOR ANY APPLICATION SERVICE FROM FUNCTIONING AT ANY TIME, FOR CONTENT IN
ANY APPLICATION SERVICE, FOR DISRUPTIONS OF SERVICE, LOCAL OR REGIONAL LIMITATIONS, WARRANTIES OF TITLE, NO INFRINGEMENT, AND
FOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. By purchasing this device, you accept such Disclaimer
without any claim on Hisense at any time.

3
Important Safety Information
SAFETY WARNINGS
Do not look directly at the lens when this device is on!
• This product comes with a laser module. Do not tear or modify this device in
any manner; otherwise, it may result in personal injury.
RG1 IEC 62471-5: 2015
CLASS 1 LASER PRODUCT IEC 60825-1: 2014
As with any bright light source, DO NOT STARE INTO THE BEAM
λ=458~472nm/519~531nm/635~651nm
Wavelength458~472nm/519~531nm/635~651nm
Caution—use of controls or adjustments or performance of procedures other than those
speciedhereinmayresultinhazardousradiationexposure.
The Device Complies with 21 CFR 1040.10 and 1040.11 except for confromance as a Risk
Group[0,1or2-SelectappropriateRG]LIPasdenedinIEC62471-5:Ed.1.0.Formore
informationseeLaserNoticeNo.57,datedMay8,2019.
• If this device requires a repair, please wear laser eye protection with an
optical density OD that is 4 or higher and has a wave length of 458-651 nm.
• Do not place any water-containing vessel on this device, such as cosmetics
or liquid medicine.
• If any object or water enters this device, please unplug this device and
contacttheservicesta󰀨ofHisense.
• Donotplace anyexposedre source(e.g.burning candle)onthis device.
Keep away from high temperature and heat.
• Do not expose the battery to direct sunlight or candle light.
• Keep air vents on both sides clear from any objects to prevent the device
from overheating inside.
• To avoid a short circuit, product damage or electric shock, do not use any
sharp object or metal to touch the ports or other openings on the device.
• If this device has been in a warm environment, allow any built-up
condensationtoevaporaterstBEFOREyouswitchthedeviceon.
• Do not allow a child to stand on or climb up this device.
• Do NOT place any object above or in front of the lens because the laser light
couldcausetheobjecttobecomeammable.
• Clean the lens periodically with a clean cloth and make sure the device is
turnedo󰀨beforeyoustart.

4
Low Blue light Content
• The long-term exposure to blue light may damage your eyes, in particular
the retina, causing visual fatigue or eye strain. Children are particularly
vulnerable to excessive blue light and the damage to them is irreversible.
Theproductcandecreasebluelightratiotoreducebluelighthazard.
Health recommendations
• Avoid long time continuous use product, ensure adequate break time.
• Looking at distant objects or exercises for the eye after use product.
• Smart Mini Projector
• 1 Remote Control
• 2 AAA Batteries
• 1 Power Cord
• 1 Power Adapter
• Quick Setup Guide
• Important Safety Information & Warranty Card
• 1 HDMI Extension Adapter
NOTE:
• The accessories may be different from the list above due to different
models, countries/regions. Please refer to the actual accessory bag.
• Screen is not included.
Packaged Contents

5
Smart Mini Projector Diagram
Detection range :
1. CMOS image sensor module: DFOV:78°,HFOV:70°, VFOV:43°
2. Time-of-Flight Sensor: 400mm-2000mm, FOV:27°
NOTE:
• Therateddetectionrangeofsensorsmayvarywithdi󰀨erent
testing environments and conditions under different test
product.
• Risks are inevitable in the usage of the projector even with
eye protection function on. Children must be accompanied by
adults when using it.
• Product image is only for reference, actual product may vary in
appearance.
ToF sensor (used for the autofocus function and eye
protection function)
CMOS image sensor module (used for the
autofocus and auto keystone correction function)
Lens
DC IN DIGITAL
AUDIO OUT
LAN AUDIO OUT
USB2.0 HDMI2(eARC)
Air ventilation
Power button / Power Indicator
Play / Pause
Volume + / -
HDMI
TV Stick
External devices
Games Console
Laptop
TV
HDMI1 USB3.0
NOTE:
If your device cannot be inserted
into an HDMI port, please use
the HDMI Extension Adapter in
the accessories.

6
Use Your Remote Power on/Standby Activate the microphone
Press to enable automatic focus Input numbers and special function buttons
D-pad (up/down/left/right navigation buttons) Confirmation button
Return to the previous place in the menu or app Press to enter Menu
Press and hold to pair the bluetooth remote
Volume (up/down) Display the Home screen
Media content control function buttons Adjust brightness
Quick access to picture mode Press to Mute or restore sound
Change input source Quick access to sound mode
Quick access buttons to apps
1
2
3
4
5
6
7
8
10
9
11
12
13
14
15
16
17
3
2
1
4
5
6
7
12
11
10
9
8
13
14
15
16
17
NOTE:
• The included remote will vary depending on models, countries/regions. Check information according to the actual
remote in the accessory bag.
• InserttwoAAAsizebatteries.Makesuretomatchthe(+)and(-)endsofthebatterieswiththe(+)and(-)ends
indicated in the battery compartment.
• The remote control can work at a distance of up to 8 metres in front of the device.

7
Basic Operation
1
Turning the device on or o󰀨
1. Plug the power cord into a wall outlet.
2. Press the button on the remote to turn on the device. When you turn
itonfor thersttime,followthe instructionsdisplayed onthescreen and
congurethedevice'sbasicsettings.
NOTE:
• When the device is started up, you can press the button on the remote
to turn it into standby mode; When the device is in stanby mode, you can
press the button on the remote to turn on the device.
• Plugthepowercordo󰀨awalloutletwhenyoudonotusethedevicefora
long time.
• Please waite at least 10 seconds to turn on the device again when it is shut
down.
WARNING:Insu󰀩cientventilationspacewillcausethisdevicetooverheat
or become damaged.
• Do not block the air vents or place any object on this device.
• Do not place this device in any narrow, enclosed or poorly ventilated space.
• At a minimum, leave the amount of space shown in the diagram below for
this device to have proper ventilation.
20cm
5cm
20cm
Laser beam

8
Automatic Focus
2
Automatic Correction
3
When the automatic focus function is enabled, the device can automatically
adjust the focus to make your projector picture clear.
• Enable automatic focus function by pressing the button on the remote.
• You can enable manual focus function by pressing and holding the the
button, and manually adjust the focus by pressing the D-pad on the remote.
Press Home button on your remote, and select Settings > Projector >
Auto Correction.
The device can perform automatic keystone correction on the projected
screen and automatically changes the screen shape into a rectangle.
More Settings
4
Press Home button on your remote, select Settings to enter the Settings
Menu to set up your device.
NOTE:
• For detailed instructions, please refer to the E-Manual.
• Parts of the software function changes with the system upgrade.
150" 120" 100" 90" 80" 70" 65"
mm 3985 3188 2657 2391 2125 1860 1727
inch 157 126 105 94 84 73 68
Screen
Size
Projection
Distance
150"
120"
100"
90"
80"
70"
65"
Image Size and Projection Distance
5

9
Maintenance
• Donottouchthisdevicewhenitisrunningorjustturnedo󰀨becauseitmay
be hot.
• Do not wipe this device with oil because it may deteriorate the exterior or
damage the paint. Contact with rubber or ethylene products for a long time
may cause stains on this device.
• If the outside of the device is dirty, turn off the device and wipe with a
damped soft cloth.
• Do not touch the lens with your hands.
• Do not touch or wipe the lens with ordinary cleaning cloth. Use a dust
blowertoremovethedustonthelens.Grease,dirtandngerprintsshould
be cleaned carefully by the professional by using optical cleaning cloth,
lens wiping paper or professional cleaning solutions to avoid destroying the
opticallminganda󰀨ectingtheimagequality.
• Toturn o󰀨thisdevice,pressthePowerbuttonontheremotecontrol.Do
notcuto󰀨thepowerdirectlywhenthedeviceisworking.
Text-to-Speech (TTS) can help you to navigate the menus on the screen.
Text-to-Speech can convert written text into voice text to help visually impaired
people listen to the information they are unable to read.
1. Press the Home button on your remote.
2. Next, select Settings to enter the Settings Menu.
3. Select Accessibility > Voice Guide.
When Voice Guide is turned on, then the contents of each menu displayed
can be broadcasted out.
https://www.hisense-usa.com/hisense-laser-cinema-c1-text-to-speech
Text-to-Speech (TTS)

10
Quick Problem-Solving Tips
Whenyouexperienceanissuewithyour Projector,pleaseturn ito󰀨andon
again. If this does not resolve the problem, then refer to the tips below.
1. When turn on projector, there is a delay for a few seconds before the
picture appears
• Thisisnormal becauseyourProjectorisinitializingandsearching for
previous setting information.
2. No sound or picture
• Check if the power cord is plugged into a powered AC outlet.
• Press the Power button on the remote control to activate the unit from
'Standby' mode.
• Check the volume settings or 'Mute' mode is set to On.
3. Some irregular shadow appear on the edge of the picture after
keystone correction
• Hisense projectors use digital correction, so the true resolution fills on
the actual display area and leaves some surrounding area unused after a
keystone correction is completed.
4. When projector is moved, automatic keystone correction function
does not work properly
• Make sure that the Auto Shift Correction function is turned on in projector
settings.
• Make sure that no obstacle is in front of the projection lens or camera
module.
5. Remote control does not work properly
• Check if the battery power is normal.
• Takeout thebatteries,pressanykeyfor1~2 seconds,andinsertthem
back.
• In special cases, press and hold [ ] button to pair.
Ifyoustillhaveotherquestions,pleaselogintothefollowingwebsiteandnd
local CUSTOMER CENTER Service Hot-line for help.
https://global.hisense.com/support/customer-center/

11
Product Specications
Model Name C1
Dimension (W × H × D) 9.6×8.5×7inches
(245×216×179mm)
Weight 10.1 lbs (4.6 kg)
ActiveScreenSize(Diagonal) 65~300inches
Screen resolution 3840 × 2160
Audio power 2 × 10 W
Power consumption 179.93W
Power supply 100-240V~60/50HzMax2.5A
Power input 19V 9.47A
Environmental conditions
Temperature:41°F-95°F(5°C-35°C)
Humidity: 25% - 75% RH
Atmospheric pressure: 86 kPa - 106 kPa
Storage Temperature 5°F to 113°F (-15°C to 45°C)
Storage Humidity 10% to 70%, non-condensing
Disclaimer:
Allproducts,product specications,anddataaresubjecttochange without
notice to improve reliability, function, design or otherwise.
Certication and Compliance
FCC Notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or Smart
MiniProjectorreception,whichcanbedetermined byturningthe deviceo󰀨
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Increase the separation between the device and receiver.
• Connectthedeviceintoanoutletonacircuitdi󰀨erentfromthattowhichthe
receiver is connected.
• Consult the dealer or an experienced radio/Smart Mini Projector technician
for help.

12
The Wi-Fi Module complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR SMART
MINI PROJECTOR INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY
TO OPERATE THE EQUIPMENT.
Declaration of Conformity
Trade Name: Hisense
Model: C1
Responsible Party: Hisense USA Corporation
Address: 105 Satellite BLVD Suite I, Suwanee, GA 30024
TelephoneNumber:1-888-935-8880
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
©2016. All rights reserved. Hisense and the Hisense logo are registered
trademarks of Hisense. Other brand and product names are registered
trademarks of their respective owners.
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol
are registered trademarks of Dolby Laboratories Licensing
Corporation. Manufactured under license from Dolby Laboratories.
Confidential unpublished works. Copyright © 2012–2022 Dolby
Laboratories. All rights reserved.
ThetermsHDMIand HDMIHigh-DenitionMultimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other
countries.
©2023. All rights reserved. Hisense and the Hisense logo are
registered trademarks of Hisense. Other brand and product
names are registered trademarks of their respective owners.