HOMEDEPOT Nestfair LMS288454A User manual

Portable Air Conditioner
Owner’s Manual
READ AND SAVE THESE INSTRUCTIONS

1. BEFORE YOU BEGIN
1.1 PRODUCT DESCRIPTION
Our powerful portable air conditioners are great cooling solutions for single
rooms, creating a comfortable atmosphere in your space. It also has
ventilation and dehumidifying function for circulating air and removal of
moisture. They're self-contained systems that do not require any
permanent installation allowing you to move to the space in which it is
most needed. They're commonly used in kitchen, temporary-resided,
computer rooms, garages, and many other places where installation of
Air-conditioner Outdoor Unit is limited.

THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY
This household appliance is intended for sue in domestic
environments and should not be used for other purposes.
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children without supervision.
The refrigerant loop is sealed. Only a qualified technician should
attempt to service!
Do not discharge the refrigerant into the atmosphere. It collects first
in low areas but can be circulated by the fans.

4
2. FOR YOUR SAFETY
Your safety is the most important thing we concerned!
2.1 OPERATIONAL PRECAUTIONS
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
The appliance shall be disconnected from its power source during
service.
Always operate the unit from a power source of equal voltage,
frequency and rating as indicated on the product identification plate.
Always use a power outlet that is grounded.
Unplug the power cord when cleaning or when not in use.
Do not operate with wet hands. Prevent water from spilling onto the
unit.
Do not immerse or expose the unit to rain, moisture or any other liquid.
Do not leave the unit running unattended. Do not tilt or turn over the
unit.
Do not unplug while the unit is operating.
Do not unplug by pulling on the power cord.
Do not use an extension cord or an adapter plug.
Do not put objects on the unit.
Do not climb or sit on the unit.
WARNING
Please read this manual carefully and fully understand
before operating your appliance.

5
Do not insert fingers or other objects into the air outlet.
Do not touch the air inlet or the aluminum fins of the unit.
Do not operate the unit if it is dropped, damaged or showing signs of
product malfunction.
Do not clean the appliance with any chemicals.
The unit shall be installed in accordance with national wiring
regulations.
Do not use means to accelerate the defrosting process or to clean,
other than those recommended by the manufacturer.
The appliance shall be stored so as to prevent mechanical damage
from occurring.
Do not pierce or burn, even after use.
Be aware that refrigerants may not contain an odour.
Compliance with national gas regulations shall be observed.
Keep any required ventilation openings clear of obstruction.

6
3. PRODUCT OVERVIEW
3.1 PRODUCT DIAGRAM
1
Control Panel
4
Power Cord
6
Air Exhaust
2
Air Outlet With
Adjustable
Louver
5
Recessed
Handle
7
Drain Opening
With Sealing
Plug
3
Air Inlet
Note: Picture shown above is for illustration purpose only. Actual product
may vary due to product enhancement.

7
3.2 FEATURES
High Capacity in a compact size with cooling, dehumidifying and fan
function
Temperature setting and display
LED Digital display
Electronic control with built-in timer, sleep mode
Self-evaporating system for better efficiency
Auto shut off when tank is full
Automatic restart in the event of power outage
Auto defrosting function at low ambient temperatures
Remote control
2-speed fan
Casters for easy mobility

8
4. INSTALLATION
4.1 UNPACKING
Unpack the carton and take the appliance and accessories out.
Inspect the device after unpacking for any damage or scratches.
Accessories:
1. Exhaust Hose
2. Hose Connector
3. Window Kit Adapter
4. Remote Control
5. Window kit

9
4.2 CHOOSE YOUR LOCATION
If tipped more than 45°, allow the unit
to set upright for at least 24 hours
before start up.
Place the unit on a firm, level surface
in an area with at least 20 inches of
free space around it to allow for
proper air circulation.
Do not operate in close proximity to
walls, curtains, or other objects that
may block air inlet and outlet. Keep
the air inlet and outlet free of
obstacles.
Never install the unit where it could be subject to：
Heat sources such as radiators, heat registers, stoves or other
products that products that produce heat.
Direct sunlight
Mechanical vibration or shock
Excessive dust
Lack of ventilation, such as cabinet or bookcase
Uneven surface

10
4.3 ATTACH THE EXHAUST HOSE
The air conditioner requires being vented outside so that the exhaust
air can escape the room which coming from the appliance contains
waste heat and moisture.
Do not replace or extend exhaust hose which will result in decreased
efficiency, even worse shut down the unit due to low back pressure.
Step 1: Connect the hose connector to one end of the exhaust hose.
Step 2: Connect the windows kit adapter to the other end of the exhaust
hose.
Step 3: Extend the adjustable window kit the length of your window.
Connect the exhaust hose to the window kit.
Step 4: Close your window to secure the kit in place. It needs to hold the
windows kit firmly in place. Secure the window kit with duct tape if required.