HOMEDEPOT G37007 User manual

PRODUCTS SERVICES
Why choose us? We offer a
diverse range of products to
meet the needs of customers.
We continue to supply high
quality and reliable products
while maintaining a balance
of price and product, and
strive to provide consumers
with quality at a good price.

Thank you for your purchase
1. If there is any damage, please kindly send clear photos of damaged parts to us as
attachment, we will check and offer you best solution soon.
2. We attach great importance to the customer experience of our products. If there's any
concern,please contact us at any time, we will provide effective solutions.
3. lt is recommended to finish assembling by more than two people, so that it will be easier
and also save your time.
Attention
Please read this instruction carefully before installation and strictly follow it during
installation. Ensure that there will be no problems in the future due to installation errors.
Installation Notes
Please check the quantity of all parts before installation (Please refer to the Parts Lists)
and the appearance of the products. Please make sure the product is correct before
installation. If there is any problem, please contact us directly.
Make sure the colored panels are facing outwards and all the holes match. The panels are
textured,please install the panels in the order specified in the instructions. All lines and
holes must be accurately matched to make the storage shed more stable. Please ensure
that all screws are tightened to prevent the product from falling apart.
There is a protective film on the surface to protect the product, please tear it off after
installation to get the final presentation. lf you do not damage the film during installation,
it can also remain on the product to protect the product.
Please place the product on a flat ground to prevent leaning and collapse. If the ground is
uneven, the door may can't be closed.
Safety Precautions
1.We recommend two adults to complete the installation.Two adults installed together will
make the installation process easier and safer.
2.The gloves must be carried to prevent hand cuts during installation.
3.Take care when using power tools near water the use of a residual current device(RCD)
is advised.
4.Please use the electric driver carefully during screwing to prevent the screw from slipping
and hurting your hand.(We recommend that beginners use a manual screwdriver for
installation.)
5. Be careful not to fall when installing the roof. Please steady the ladder and make sure the
product placed on a flat ground.

WARNING
For your safety concern,please do not stand under the metal shed in heavy wind or
snow days.
For safety, please use expansion screws to reinforce the posts to the ground.
In extreme weather conditions,you can use a rope to pull the four corners of the
gazebo to keep it stable.
Please clear the snow off the roof in time for the heavy snowfall.
Make sure all screws are tightened before use.
Repeat to confirm all screws, buckles and straps every 90 days.
Please keep all screws loose during the assembly process and tighten them after
completing the installation.
Do not use or store objects in the Metal Shed with open flames or flammable
chemicals.
Please note that some parts have sharp edges and should be handled with gloves.
If any parts are missing, broken, damaged or worn, discontinue use of the product
until repairs are made or factory replacement parts are installed.
Installation of the product in a manner that does not conform to the manufacturer's
instructions may result in the loss of the warranty policy for this product.
4

K35-1 K35-2 K35-3
K35-4 K35-5 ULA
URA K35-6LK35-6R
K35-7 K35-9 K35-10L
K35-10R K35-11L K35-11R
DD DLA1 DRA1
5

DX1 W5-X W3-HX
W5-C W5 W3
K35-8L K35-8M K35-8R
GC T-F DCS
C2 DH
6
GF

HARDWARE
F1
198PCS
F2
39PCS
F3
16PCS
V2
189PCS 42PCS 1PC
SL M4
ST
2PCS
7

Part List
K35-9
GC
GC K35-8L
K35-8M
K35-8M
K35-8R
K35-9
GC
GC
K35-10L
K35-10R
K35-11R
K35-11L
8
GF
GF K35-6L
C2
C2
K35-3
K35-7
K35-5
K35-4
C2
K35-3
C2
K35-6R
GF

W5-C
W5-C
W3
W3
W5
W5
W5
W5-C
W5-C
W3
URA
W3-HX
DCS
DX1
DX1
DD
DD
W5-X
W3
W5
ULA
DLA1
T-F
T-F
T-F
T-F
K35-2
K35-2
K35-1
K35-1
Part List
9
DRA1

Top Plate
W5-C
W3
W5-C
W5
W5W5 W3
W5-C W5-C
W3
W5 W3 W5-X W3-HX
K35-8RK35-8MK35-8MK35-8L
10

F1 V2
Shed Base Frame Assemble
Link the two "K35-1" and "K35-2" to each other, and reinforce the four corners
with "T-F".
T-F
T-F
T-F
T-F
K35-2
K35-2
K35-1
K35-1
V2
F1
V2
V2
F1 V2
F1
11

Shed Side Panels Assemble
Mount the 4 "W5-C" on the Shed Base Frame Assemble as shown.
2
W5-C W5-C
W5-CW5-C
W5-C
W5-C
W5-C
W5-C
W5-C
W5-C
W5-C
F1 V2
12

Install two "K35-3" on "W5-C" as shown
3
Link "K35-4" and "K35-5" with "K35-3" using 4 "C2"
4
W5-C
W5-C
W5-C
W5-C
K35-3
K35-4
W5-C
W5-C
W5-C
W5-C
K35-4
K35-3
K35-3 K35-4
K35-3
K35-5
K35-4
K35-3 K35-3
K35-5
K35-5
K35-3
C2
F1
V2
F1
V2
C2
F1
V2
16
16
13

Install three "W5" on "K35-4".
5
Install the remaining "W3" "W5" according to the diagram.
F1
V2
W5-C
W5-C W5-C
W5-C
W5W5W5
F2
F2
F1
V2
F1
V2
F2
W5 W5 W5W3
W5 W3
W3
W5-C
W5-C W5-C
W5-C
W3
14

Install "ULA" on the left side of the door frame and "URA" on the right side of
the door frame
7
F2
F1
V2
F1
V2 ULA
ULA
ULA
URA
URA
V2
F1
F1 V2
W5 W5 W5
W5
W3
W3
W3
W3
W5-C
W5-C W5-C
W5-C
URAULA
15

Shed Top Frame Assemble
Install "GF" on two "K35-6"
"K35-6L" is mounted on the top left, "K35-6R" is mounted on the top right
8
Install the "K35-7" on top of the front
9
F1
V2
K35-6L
K35-6R
F2
K35-7
F1
V2
K35-7
K35-6L
K35-6R
K35-7
16
F2
F2 GF
GF

Shed Top Panels Assemble
"K35-8L" is mounted on the top left, "K35-8R" is mounted on the top right.
10
Install the remaining two "K35-8M" in the ceiling void
11
F1
V2
K35-8L
K35-8L
K35-8R
F1
V2
K35-8L
K35-8M
K35-8M
K35-8R
F1
V2
K35-8M
K35-8M
F1
V2
K35-8MK35-8MK35-8L K35-8R
17

1. Install hemming "K35-9" on both sides of the roof.
2. Connect and install K35-10R and K35-10L on the rear side of the roof.
3. Connect and install K35-11R and K35-11L on the front side of the roof.
4. Install the corner "GC" on the four corners of the roof.
12
F1
V2
K35-9
K35-9
K35-9
K35-9
K35-10R
GC V2
F1 V2
F1
F2
K35-10R
K35-10L
K35-11R
K35-11L
GC
GC
GC
GC
18

13
19
1.Combine "W5-X" and "W3-HX" into a door
2. Install "DD", "DLA1" and "DRA1" around
F2
W5-X
W3-HX
DLA1
DD
DRA1
DD
F1

13Mount "DX1" on the back of the door for reinforcement
20
F2
F1
DX1