HOMEDEPOT L-DNC276PAL User manual

March 2016 Made in China 1 / 4
ASSEMBLY INSTRUCTIONS
L-DNC276PAL
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00AM EST to 8:00 PM PST or email to [email protected] or visit www.sunjoyonline.com to
place your order or fax your parts replacement order form together with your purchase receipt to 1-740-283-3549 for
assistance.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of 6 Months.
However, we don't reimburse for transportation or delivery costs, or compensate the individual or any outside party for
assembling or disassembling the product. This limited warranty is extended to the original purchaser and applies to
defects in materials and workmanship of your item, provided the item is maintained with care and used only for
personal residential purposes.

March 2016 Made in China 2 / 4
Parts List
Part# Description QTY
A Back 1
B Seat 1
C Left Armrest 1
D Right Armrest 1
E Connection bar 1
F Wheel 2
G Back cushion 1
H Seat Cushion 1
Hardware Pack
Part# Description QTY
H1 Bolt M8x20 2
H2 Flat washer M8 8
H3 Plastic cover M6 (preassembled) 2
H4 Bolt M8x45 2
H5 Bolt M6x20 (preassembled) 2
H6 Plastic cover M8 2
H7 Bolt M6x15 2
H8 Bolt M6x40 4
H9 Bolt M6x25 4
H10 Spring washer M6 8
H11 Flat washer M6 (4pcs preassembled) 12
H12 Foot pad (preassembled) 4
H13 Screw M5x20 (preassembled) 6
H14 Wrench M6 1
H15 Wrench M8 1
H16 Wrench M8 1
Assembly Steps:
STEP 1.
Fig1: Insert the connecting bar (E) into the casing pipe of
the left armrest (C) and right armrest (D), align the
hole of the connecting bar (E), left armrest (C) and
right armrest (D).
Fig2: Lock the bolt (H7) onto the left armrest (C) and
right armrest (D) with (H14).

March 2016 Made in China 3 / 4
STEP 2.
Fig1: Align the hole of the seat(B), left armrest(C) and
right armrest (D), cross through spring washer
(H10) and flat washer (H11) with bolt (H8), then
lock them onto left armrest(C) and right armrest (D)
but not tightening.
Fig2: Cross through spring washer (H10) and flat washer
(H11) with bolt (H9), then lock onto seat(B) but not
tightening.
STEP 3.
Attach the wheels (F) and connecting
bar (E), insert bolt (H1) into the flat
washer (H2), lock onto the connecting
bar (E) with wrench (H15), tighten up
the screw.
STEP 4.
Align the hole of the back (A) and seat (B), insert
bolt (H4) with flat washer (H2) through back (A)
and seat (B) into bolt (H6), then tighten up with
wrench (H15/H16).

March 2016 Made in China 4 / 4
STEP 5.
Adjust the chair to the proper location as needed. (As above Fig.1, Fig.2 and Fig.3 shown).
Fig.1.Fig.2 Fig.3
STEP 6.
Place seat cushion (H) onto seat (B) and tie with Velcro,
place back cushion (G) onto back (A) and tie with
Velcro.