HOMEVIZ OB10 User manual

USER MANUAL
HOMEVIZ OB10 Wireless Security Camera
v1.0

What’s in the Box
Product Overview
Specifications
Getting Started
Contact Us
2
3
4
4
18
CONTENTS
1

WHAT’S IN THE BOX
OB10 Wireless
Security Camera × 1
Waterproof Cap × 1
Antenna × 19.8ft Power Adapter (12V/1A)
Screw × 4 Anchor × 4
Quick Start Guide × 1
V1.0
Quick Start Guide
HOMEVIZOB10 Wireless Security Camera
2

PRODUCT OVERVIEW
Reset
MIC
Speaker
microSD Card Slot
Reset
Power Jack
LAN
Lens
Photosensitive Sensor
Antenna
IR Lights
White LED Lights
IR Lights
White LED Lights
3

SPECIFICATIONS
Main Chip
Sensor
Viewing Angle
Camera
Alarm Trigger
Storage
Waterproof Level
Network
XM530
Image output 2304 × 1296 (2K)
90° diagonally, 69° horizontally, 50° vertically
4 LED lights, 4 infrared lights
Custom motion detection, human detection, area
detection, etc.
Supports up to 128GB microSD card
IP66
2.4GHz band
GETTING STARTED
1. Downloading and Installing the App
Option 1: Scan the QR code below:
HOMEVIZHOMEVIZ
Option 2: Search for the "HOMEVIZ" app on the App Store or Google Play.
4

2. Connecting to Power
Insert a microSD card (not included) into the microSD slot. Then connect the
camera to a wall outlet with the included power adapter.
Reset
Tip: To initialize the device, press and hold the reset button for about 10 seconds
until you hear a prompt sound.
3. Setting up the Camera
• Wireless Network Configuration
Step 1: Open the "HOMEVIZ" app and tap "Login". (Please register first if you don't
have an account.)
Step 2: Tap "+".
Device List
Click to add device
Device AlbumAlarm My
Other Login Methods
Login
Register Forget Password
Please Input UserName
Please Input Password
Step 1 Step 2
5

Step 3: Tap "Wireless camera".
Step 4: Tap "OB10 Security Camera".
Step 5: Tap "Fast network configuration".
Add camera
Network video recorder
Add network video recorder
Wireless camera
Add WIFI wireless webcan
Wireless camera
CB10
Security Camera
Wireless camera
Fast network configuration
Pair via WiFi
Share & add
Add with sharing code
Step 5Step 3 Step 4
6

Enter the network name and password of your current Wi-Fi network and Tap
"Next".
Note: This device currently only supports 2.4GHz Wi-Fi. If you are using 5GHz Wi-Fi,
please confirm that your Wi-Fi is compatible with 2.4GHz.
Step 2 Connect to the network
Next
saina-210
Please enter WIFI password
Only search devices in the same LAN.
Try to keep the device,mobile phone and router
close enough,long press the SET button until the
indicator light flashes quickly (for some products,
a thimble shall be gently inserted into the
configuration hole)
Step 2 Connect to the network
Next
saina-210
Please enter WIFIpassword
Only search devices in the same LAN.
Try to keep the device,mobile phone and router
close enough,long press the SET button until the
indicator light flashes quickly (for some products,
a thimble shall be gently inserted into the
configuration hole)
Please wait ...
7

• Alarm Push
To receive alerts and push notifications：
Step 1: Tap .
Step 2: Tap [Intelligent Alarm] to enter the alarm setting interface.
Step 3: Enable"Humanoid Detection Switch", "APP Push", and "Allow Notifications".
Customize alarm settings according to your needs.
Step 3
Intelligent alert Save
Humanoid Detection Switch
Turn the figure detection function on or off
Show movement traces
Alam Lingage
Reginoal Settings
Displays Traces
Turn alarm recording on or off
Alarm Record
Turn alarm snapshot on or off
Alarm Snapshot
Turn App push on or off
APP Push
Turn push on or off
Allow Notifications
Cordon Alert Area
Alarm Sound
Step 2
b11b75a5b5cbebed
Device Name
OSD Configuration
Video Management
Intelligent Alarm
Time Synchronous
2020-12-29 09:38:19
East8.0 District
Click here to sync device time to your phone
Advanced Setting
Firmware Upgrade
Deivice Reboot
About
It is already the latest
version
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Step 1
8

Step 1
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
• View Video Playback
To playback video footage, ensure that an SD card (Max. 128GB, sold separately) is
inserted into the camera.
Step 1: Tap the device.
Step 2: Tap [PlayBack].
Talk: Tap and hold to talk and listen
Sound: Tap to unmute or mute
Record: Tap to start/stop manual recording
Snap: Tap to take a snapshot
Setting: Tap to go to Settings
Step 3
Remote video
1X
Snap
Record Play Multiple Voice
09:14:49
09:12:55
2020-12-29 15:45:04
2020-12-29
:00 05:00:00 06:00:00 07:00:00 08:00:00 09:00:00 10:00:00 11:00:00 12:00
Meaning of Colors:
Normal Video: Normal Video
Alarm Record: Human Detection Video
Detect Recording: Motion Detection Video
Step 2
b11b75a5b5cbebed
Sound
Talk
1CH
PlayBack Vigillance
Record Snap Setting
Video Open Successfuly
0.0KB/S
HD
HD
9CH4CH
Channel Management
9

Step 3Step 1
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
• Night Alarm Light Setting
Step 1: Tap on the device.
Step 2: Tap [Vigilance].
Step 3: Enter the night alarm light settings page.
There are three light modes: HUMAN SHAPE DETECTION, WARM LIGHT FULL
COLOR and INFRARED MODE.
• HUMAN SHAPE DETECTION: The white LED lights turn on only when human
motion is detected at night, and a short full-color video clip is recorded.
• WARM LIGHT FULL COLOR: The white LED lights stay on at night to record
full-color night-time videos.
• INFRARED MODE: Only the infrared lights are on and images appear in black and
white at night.
Step 2
b11b75a5b5cbebed
Sound
Talk
1CH
PlayBack Vigillance
Record Snap Setting
Video Open Successfuly
0.0KB/S
HD
HD
9CH4CH
Channel Management
b11b78a5b5cbebed
Light Mode WAI
60s
Mid
Continuos lighting time
Sensitivity
Humanoid alarm trigger setting
SoundTalk Record Snap Setting
HUMAN SHAPE DETECTION
10

Intelligent alert Save
Humanoid Detection Switch
Turn the figure detection function on or off
Show movement traces
Alam Lingage
Reginoal Settings
Displays Traces
Turn alarm recording on or off
Alarm Record
Turn alarm snapshot on or off
Alarm Snapshot
Turn App push on or off
APP Push
Turn push on or off
Allow Notifications
Cordon Alert Area
Alarm Sound
Step 3
Step 1
• Customize Alarm Voice Settings
Step 1: Tap .
Step 2: Tap [Intelligent Alarm].
Step 3: Tap [Alarm Sound].
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Step 2
b11b75a5b5cbebed
Device Name
OSD Configuration
Video Management
Intelligent Alarm
Time Synchronous
2020-12-29 09:38:19
East8.0 District
Click here to sync device time to your phone
Advanced Setting
Firmware Upgrade
Deivice Reboot
About
It is already the latest
version
11

Alarm Sound Save
Alarm Sound
Turn the alarm on or off
Alarm Sound Save
Alarm Sound
Turn the alarm on or off
Alarm Sound Type
Bell Alarm
Alert area,please leave
Hazard area,keep out
No parking in this area
You have entered the monitoring area
Hello welcome
Do not touch valuables
Private sphere,no entry
Danger of depth,pay attention to safety
High danger,please don’t climb
Please select alarm sound
Custom Sound
Alarm Sound Save
Alarm Sound
Turn the alarm on or off
Alarm Sound Type
Bell Alarm
Alert area,please leave
Hazard area,keep out
No parking in this area
You have entered the monitoring area
Hello welcome
Do not touch valuables
Private sphere,no entry
Danger of depth,pay attention to safety
High danger,please don’t climb
Please select alarm sound
Custom Sound
Step 4: Tap the toggle switch next to [Alarm Sound] to enable or disable the alarm
sound.
If [Alarm Sound] is enabled, when the system detects an alarm situation, the set alarm
sound will be heard. You can select from the system's built-in alarm sounds.
If [Alarm Sound] is disabled, there will be no corresponding alarm sound when an
alarm is triggered.
To customize the alarm voice,
tap [Custom Sound].
12

Option 1: Text-to-speech.
Enter the desired alarm information in the text box, choose either a male or female
voice, tap [Transformation] to proceed, tap [Listen] to listen, then tap [Upload
prompt tone] to upload.
Option 2: Record sound directly as the alarm message.
Tap to record and tap [Listen] to listen after the recording is complete, then
tap [Upload prompt tone] to upload.
Custom Voice
Text to speech Recording Prompt
Please enter the text to be converted
Male Female
Transformation
Upload prompt tone
Listen
Custom Voice
Upload prompt tone
Listen
Text to speech Recording Prompt
00:00
Option 1 Option 2
13

Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Step 1
Intelligent alert Save
Humanoid Detection Switch
Turn the figure detection function on or off
Show movement traces
Alam Lingage
Reginoal Settings
Displays Traces
Turn alarm recording on or off
Alarm Record
Turn alarm snapshot on or off
Alarm Snapshot
Turn App push on or off
APP Push
Turn push on or off
Allow Notifications
Cordon Alert Area
Alarm Sound
Step 3
• Alert Area Settings
Step 1: Tap .
Step 2: Tap [Intelligent Alarm].
Step 3: Tap [Alert Area] to enter the alert area settings interface.
There is a variety of shapes for alert areas. Users can freely drag and adjust the
size and rotation direction of the shape.
An alarm will be automatically triggered only when motion is detected within the
alarm zone.
No alarm will be triggered by events outside the alarm zone.
Step 2
b11b75a5b5cbebed
Device Name
OSD Configuration
Video Management
Intelligent Alarm
Time Synchronous
2020-12-29 09:38:19
East8.0 District
Click here to sync device time to your phone
Advanced Setting
Firmware Upgrade
Deivice Reboot
About
It is already the latest
version
alert area
Revert undo Done
OblongTriganle
application scenarios
Pentagon L shape
14

Step 2
b11b75a5b5cbebed
Device Name
OSD Configuration
Video Management
Intelligent Alarm
Time Synchronous
Advanced Setting
Firmware Upgrade
Deivice Reboot
About
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Step 1
Intelligent alert Save
Humanoid Detection Switch
Turn the figure detection function on or off
Show movement traces
Alam Lingage
Reginoal Settings
Displays Traces
Turn alarm recording on or off
Alarm Record
Turn alarm snapshot on or off
Alarm Snapshot
Turn App push on or off
APP Push
Turn push on or off
Allow Notifications
Cordon Alert Area
Alarm Sound
Step 3
• Cordon Settings
Step 1: Tap .
Step 2: Tap [Intelligent Alarm].
Step 3: Tap [Cordon] to enter the cordon settings interface.
There are three modes for cordon settings. Users can freely drag and adjust the
size and direction of the cordon.
• From Left to Right: When a human body is detected moving from left to right, the
alarm will be triggered automatically.
• From Right to Left: When a human body is detected moving from right to left, an a
larm will be triggered automatically.
• Two-way Alert: When a human body is detected moving from left to right or from
right to left, an alarm will be triggered automatically.
cordon
Revert undo Done
From Left To Right From Right To Left
alert triggered direction
15

Step 2
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Step 1
• Sharing Setting
Step 1: Tap .
Step 2: Tap [Share to friend] and a screenshot with a QR code will be sent to your
friend. After scanning the QR code using the HOMEVIZ app, your friend can access
the camera and adjust the related settings.
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Cancel
Share to friends
Modify device name
Delete
44aab9fb8c48fd82
44aab9fb8c48fd82
16

tip
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Option 1
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Device List
b11b75a5b5cbebed
Device Alarm Album My
Online
Option 2
Cancel
Share to friends
Modify device name
Delete
44aab9fb8c48fd82
44aab9fb8c48fd82
Add a camrea
OK
d71a73e8d040f89f
d71a73e8d040f89f
The device has been bound with
a master account.The master
account is required to share the
authorization code to add or
delete the device
Detail information
Error prompt
OK
• Master Account Protection Mechanism
If [tip] is prompted when you are trying to bind the device, it means that the
device has been bound to another account.
You may try one of the following:
1. Unbind the original account: Contact the or original user to unbind the
camera from its original account in the app (delete the camera from his/her
HOMEVIZ account). Then you can bind the camera with your account.
2. Use the multi-person sharing function: Ask the original user to share the QR
code (tap [Share to friends]).
17

Add a camrea
OK
d71a73e8d040f89f
d71a73e8d040f89f
The device has been bound with
a master account.The master
account is required to share the
authorization code to add or
delete the device
Detail information
Error prompt
OK
• Abnormal Situation
If the following prompt appears or you have a problem when you connect the
device for the first time, please contact us immediately and email the device's
serial number (usually on the top or bottom of the camera) to [email protected].
We will reply promptly and provide high-quality after-sales services.
CONTACT US
For any inquiries about HOMEVIZ products, please feel free to contact us. We will
respond within 24 hours.
Email: [email protected]
Tel: [phone] (US) Mon-Fri (except holidays) 9am-5pm (EST)
Official website: www.homeviz.net
The microSD, microSDHC, microSDXC and SD marks and logos are trademarks of
SD-3C, LLC.
18