homezone ELI1341V User manual
210x297mm
Client: AMAZON
IM
T101P61Z01
Client ID:
Item NO.:
Division: File NO.:
Finish Date:
Contact: Art window/Jason.Wu ext:8270
Packaging Description:
Package Size:
Cutter
PDS 540 File Information
Joe
Amy Fanny
Packaging Design
Implement Confirmation
Sales Division
Applicant Designer
Design Division
Signed by Applicant & Sales Division
forall Items
20210810
Colors:
20210810
ELI1341V10163406
KDiecut
Model. ELI1341V
SOLAR POST CAP LIGHT - BLACK (2-PACK)
IMPORTANT SAFETY OPERATING INSTRUCTIONS
1. Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury,
property damage caused by fire, cuts, bruises, death and other dangers.
2. Please follow these general precautions before installing, maintaining, or fixing.
WARNING
1. The packing contains small parts that could be swallowed by children.
2. Keep the packaging material away from children and pets.
3. The solar light is not a toy.
4. We do not take responsibility if the instruction manual is not followed correctly or if the product is handled
improperly resulting in damage to person or property.
PRECAUTION
1. It is important to select an outdoor location with full direct sunlight where the solar panel can receive at least 8
hours of sunlight each day.
2. It is important to avoid placing the solar light by light sources, such as street lights or porch lights, which may
cause the solar light to turn off automatically.
3. To avoid explosion and corrosion, please keep the solar light away from fire and humid environment.
4. No striking to avoid any damages to solar cell.
PARAMETER
1. Dimensions: 6 inch (L) x 6 inch (W) x 3.5 inch (H).
2. Light source: 1pc warm white LED, 3000K – 3500K
3. Brightness: 10 Lumens
REF. PARTS
Solar Unit 4pcs Screws per unit 4pcs Anchors per unit
Model. ELI1341V
SOLAR POST CAP LIGHT - BLACK (2-PACK)
Warning, only rechargeable battery should be used.
HOW TO OPERATE AND INSTALL
HOW TO WORK
Figure 1
1. Gently remove all parts from the package and lay them out on a smooth surface.
2. Twist the Plastic Housing clockwise and remove it from the Solar Panel Unit.
3. Remove the isolator tab on the bottom of the Solar Panel Unit.
4. Align the tab on the top of the Plastic Housing into the slot on the bottom of the
Solar Panel Unit, then twist the Solar Panel Unit clockwise to tighten.
Figure 2
1. Remove the Flat base from the Plastic Housing by turning anti-clockwise.
2. Mark 4 holes (5mm) on your wood posts, using the Flat base as a guide and drill
down.
3. Put the Flat base on the post and mount the base to the post using the 4 mounting
screws with a screwdriver.
4. Align the tab on the Flat base into the slot on the bottom of the Plastic Housing,
then twist the Plastic Housing clockwise to tighten.
5. One size fits all wooden posts come in all shapes and sizes. Our single base looks
lovely on any 4-6inches square or round wooden post.
Note: Lights may have a protective film over the solar panel. This
must be removed prior to use.
CLEANING AND MAINTENANCE
1. Use a damp cloth to clean the solar panel.
2. To avoid any damage to this light, please do not use any chemical or abrasive cleaner.
RECHARGEABLE BATTERY
This product contains (1)1.2V AA 800mAh Ni-MH rechargeable battery. When the battery expires, it must be
recycled or disposed of properly. Please contact your local waste disposal authority for correct procedure. Do not
put battery into fire.
Battery replacement
1.Twist the Plastic Housing and remove it from the Solar Panel Unit.
2. Open the battery chamber cover on the bottom of solar panel unit.
3. Replace the old battery with a new battery making sure the polarity is correct.
4. Reposition the battery cover tightly.
Solar panel collects
sunlight to charge the
battery (included) during
the day.
Automatically turns on at
dusk for up to 8 hours of
nighttime illumination.
Table of contents
