Hupper H410 User manual

H410 4G OBD User Manual V1.0
http://www.hupperiot.com
H410 - 4G OBD Tracker
User Manual V1.0
Preface
Congratulations on choosing Hupper H410 4G OBD GPS tracker. This manual
shows how to easily program and setup the tracker for best results. Make sure to read
this manual carefully before using this product, so as to avoid delays or confusion with
it’s operation. Please note that specifications and instructions are subject to change
without notice to facilitate product improvement. Updates and changes will be
integrated into the latest release. The manufacturer assumes no responsibility for any
errors or omissions in outdated documents.
1

http://www.hupperiot.com 2
H410 4G OBD User Manual V1.0
1. Overview
The H410 is a plug-and-play 4G OBD GPS tracker without wiring. Easy
install to any vehicle with a standard OBD II connector. It can be used to locate, track
and monitor the vehicle via SMS, PC Computer or Mobile APP. It is commonly
used to track and locate individual vehicles, the user also can real time tracking and
check the historical route travelled.
2. Main Function
1. Support 4G /3G/2G network
2. Support 8 WiFi hotspots maximum devices connections
3. Support GPS+LBS+WIFI three mode positioning
4. Driving behavior analysis report
5. Precise mileage reports for each driving trip
6. Gasoline consumption reports
7. Vehicle error code alert
8. Device unplugged alert
9. Bad Driving behavior alert
10. Engine high speed run alert
11. Water temperature alert
12. Engine idling alert
13. Geo-Fence and history playbackSpecifications
3. Installation
3.1 SIM Card installation
Open the SIM card slot cover and insert the SIM card (Diagram #1) ,then a click
will be heard upon successfully placing the SIM card in its place. Please follow the
insert direction marked on the SIM card cover.Then put SIM card cover back.
(Diagram #1)
Note: The device only supports Micro Size SIM card;

3
H410 4G OBD User Manual V1.0
3.2 Install the Device
•First, find the OBD port in the vehicle.
•Park the car and make sure engine is off, align the OBD connector of the
device with the engine diagnostic port and simply push in place, ensuring
the device is secure.
•If the OBD port cover can not be closed back after device plugged in,
please use OBD extension cable and mount the device in proper place.
Some heavy duties request connect with a 9-pin or 6-pin wiring harness.
http://www.hupperiot.com
3.3 Mobile App and Web platform install and login
zSearch “AmberOBD” in Google Play or iOS store to download the Mobile
App
Mobile Phone App
App Register
•Go to the App register UI
•Input the necessary information
•The "IMEI" code is from OBD device
Login in the APP with Account and
password

4
H410 4G OBD User Manual V1.0
http://www.hupperiot.com
3.4 PC Web Platform Login
Please go to : http://www.amber360.com
•Choose your prefered language
•Login in the webplat form with the account and password which registered on the
MobileAPP .
Web platform UI