Husqvarna 580 580 580 580 600 User manual

Part's Manual
580 R, 580 RS, 580 RSE,
580 RSW, 580 BBC, 600 C
606 00 02 97 6/01
Printed in USA

2
T
HE
M
ANUAL
Before you operate your unit, carefully and completely
read manuals supplied with the unit. The contents will
provide you with an understanding of safety instructions
and controls during normal operation and maintenance.
For your safety and the safety of others always read,
understand, and follow all DANGER, WARNING, and
CAUTION messages found in manuals and on safety
decals.
Hardware descriptions are given in decimals.
S
ERVICE AND
R
EPLACEMENT
P
ARTS
When ordering replacement parts or making service
inquiries, know the Model and Serial numbers of your unit
and engine.
Numbers are located on the product registration card in
the unit literature package. They are printed on a serial
number label, located on the frame of your unit.
• Record Unit Model and Serial numbers here:
• Record Engine Model and Serial numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Husqvarna replacement parts. The replacement
of any part on this vehicle with anything other than a
Husqvarna authorized replacement part may adversely
affect the performance, durability, or safety of this unit
and may void the warranty. Husqvarna disclaims liability
for any claims or damages, whether warranty, property
damage, personal injury or death arising out of the use of
unauthorized replacement parts.
Decimals to Fractions
.063 1/16 .563 9/16
.125 1/8 .625 5/8
.188 3/16 .688 11/16
.250 1/4 .750 3/4
.313 5/16 .813 13/16
.375 3/8 .875 7/8
.438 7/16 .938 15/16
.500 1/2 1.00 1
P
RODUCT
R
EGISTRATION
Please fill out and return the Warranty Registration Card
to Husqvarna. This card activates the warranty. Claims
meeting requirements during limited warranty period will
be honored.
Y
OUR
S
ATISFACTION
I
S
I
MPORTANT
Questions? Please follow these helpful steps:
1. Refer to the manuals supplied with your unit.
They will guide you through safe and proper
operation and maintenance.
They contain specifications on your unit.
If your questions are not answered in these manuals,
go to step number two.
2. Contact Your Dealer.
Our dealers will be happy to supply any service or
advice required to keep your unit operating at peak
efficiency.
A factory trained staff is available to support your
equipment needs. They stock genuine Husqvarna
parts and lubricants manufactured with the same
precision and skill as the original.
If your questions are not resolved by the support
staff, ask for the manager or owner.
When contacting your Dealer supply your model and
serial numbers.
TO SPEED PARTS ORDERING:
1. Know the model and serial numbers of your unit.
2. Know the part number required.
3. Know the quantity required.
4. Know the part description.

3
M
ODELS
Model 601 10 00 20 (580 RS)
4 Cycle-Briggs & Stratton Intek OHV 6.5 HP
Recoil, Self-Propelled
Serial No. 000101 and up
Model 601 10 00 21 (580 RSE)
4 Cycle-Briggs & Stratton Intek OHV 6.5 HP
Electric, Self-Propelled
Serial No. 000101 and up
Model 601 10 00 22 (580 RSW)
4 Cycle-Briggs & Stratton Intek OHV 6.5 HP
Recoil, Self-Propelled, Swivel
Serial No. 000101 and up
Model 601 10 00 23 (600 C)
4 Cycle-Robin 6.0 HP
Recoil, Self-Propelled, Commercial
Serial No. 000101 and up
Model 601 10 00 24 (580 R)
4 Cycle-Briggs & Stratton Intek OHV 6.5 HP
Recoil
Serial No. 000101 and up
Model 601 10 00 25 (580 BBC)
4 Cycle-Briggs & Stratton Intek OHV 6.5 HP
Recoil, Self-Propelled
Serial No. 000101 and up
T
ABLE
O
F
C
ONTENTS
D
ECALS
Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
M
AIN
F
RAME
& E
NGINE
Handlebar and Controls . . . . . . . . . . . . . . . . . . . . . . . 6
Mower Pan and Bag. . . . . . . . . . . . . . . . . . . . . . . . . . 8
Blade and Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Engine and Electrical . . . . . . . . . . . . . . . . . . . . . . . . 11
Engine-BBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
W
HEELS
Swivel Wheels and Brackets . . . . . . . . . . . . . . . . . . 13
Wheels and Adjusters . . . . . . . . . . . . . . . . . . . . . . . 14
Friction Wheel and Adjusters . . . . . . . . . . . . . . . . . . 16
E
LECTRICAL AND
C
ONTINUITY
D
IAGRAMS
Electrical and Continuity Diagram . . . . . . . . . . . . . . 18
© Copyright 2000, 2001

4
D
ECALS
Model 580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
08086900
08088300
DANGER
KEEP HANDS and FEET AWAY
Do not operate mower
unless guards are in
operating position or
bagger is attached.
07761700B
DANGER / PELIGRO
TO AVOID SERIOUS INJURY OR DEATH
POUR EVITER LES BLESSURES GRAVES OU LA MORT
PARA EVITAR DAÑOS SERIOS O LA MUERTE
• Read the operator's manual.
• Keep children and others away from unit while operating.
• Never direct discharge toward other people. Thrown
objects can cause injury.
• Do not operate mower unless guards are in operating
position or entire bagger is attached.
• Keep safety devices (guards, shields, switches, etc.) in
place and working.
• Go across slopes, not up and down.
• Look down and behind before and while moving backward.
• Lire le manuel de l'utilisation.
• Éloigner les enfants et toute autre personne pendant le
fonctionnement de la machine.
• Ne jamais décharger directement en direction de quelqu’un.
Des particules projetées peuvent provoquer des blessures.
• Ne pas utiliser la tondeuse sans garant et sans sac
totalement attaché.
• Maintenez toujours en place tous les elements de securite
(protecteurs, interupteurs, etc.).
• Tondez le long des pentes, jamais de haut en bas ou
inversement.
• Regardez derriere er sur les cotes lorsque vous reculez.
• Leer el manual del operador.
• Mantenga la unidad alejada de los niños u otras personas
cuando esté en funcionamiento.
• Nunca dirija la descarga hacia otras personas, a que los
objetos lanzados pueden provocar lesiones.
• No poner en funcionamiento la máquina a menos que las
guardas estén en posición de funcionamiento o la
embolsadora entera esté conectada.
• Mantenga artefactos de seguridad (defensas, protectores,
interruptores, etc.) en su lugar y trabajando.
• Transversa pendientes, no subir ni bajar.
• Mire hacia abajo y detras antes y durante retroceso.
07742400B
PM0191
1
2
3
4
6
7
8
9
10
5

5
D
ECALS
Model 580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
Item Part No. Qty. Description
1 606 00 00 12 1 Decal, Speed Control
2 606 00 00 04 1 Decal, Swoosh Husqvarna
3 606 00 00 07 1 Label, Bagger 21"
4 606 00 00 09 1 Decal, Danger
5 606 00 02 99 1 Decal, 580 R
606 00 00 05 1 Decal, 580 RS
606 00 02 48 1 Decal, 580 RSE
606 00 02 49 1 Decal, 580 RSW
606 00 03 01 1 Decal, 580 BBC
606 00 02 50 1 Decal, 600 C
6 606 00 02 51 1 Decal, Husqvarna & Robin (600 C)
606 00 02 52 1 Decal, Husqvarna-Briggs & Stratton Intek OHV ( 580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC )
7 606 00 02 53 1 Decal, Robin 6HP OHV-Commercial (600 C)
606 00 02 54 1 Decal, OHV 6.5 Husqvarna (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
8 606 00 00 08 1 Decal, Bilingual Danger
9 606 00 03 18 1 Decal, Key Switch (580 RSE)
10 606 00 00 13 1 Decal, Engine Control

6
H
ANDLEBAR AND
C
ONTROLS
Model
580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
Item Part No. Qty. Description
1 606 00 00 30 1 Engine Bail Weldment(580 R, 580 RS, 580 RSE, 580 RSW, 600 C)
606 00 02 89 1 Bail- Blade Brake/Clutch(580 BBC)
2 606 00 00 45 4 Washer-Flat-Steel .32 x .44 x .44 x .56 (580 R, 580 RS, 580 RSE, 580 RSW, 600 C)
606 00 00 45 3 Washer-Flat-Steel .32 x .44 x .44 x .56(580 BBC)
3 606 00 00 34 4 Bushing-Flange .325 x .688 x .560 (580 R, 580 RS, 580 RSE, 580 RSW, 600 C)
606 00 00 34 3 Bushing-Flange .325 x .688 x .560(580 BBC)
4 606 00 00 60 2 Cap, Vinyl .25 I.D. (580 R, 580 RS, 580 RSE, 580 RSW, 600 C)
606 00 00 60 1 Cap, Vinyl .25 I.D. (580 BBC)
5 606 00 00 29 1 Traction Bail(580 RS, 580 RSE, 580 RSW, (580 BBC, 600 C)
6 606 00 00 31 1 Handlebar
1
4
5
6
7
8
9
10
11
11
10
45
11
11
12
13
14
15
16
17
18
19
16
20
21
22
23
24
25
26
19
27 28
29
30
29
30
31
32
33
34
35
36
36
37
38 39
40
41
42
43
44
4
46
PM0026
2
2
3
3
1
2
3
47
50
49
48
51
52
580 BBC 580 R, 580 RS, 580 RSE, 580
RSW, 600 C

7
H
ANDLEBAR AND
C
ONTROLS
Model
580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
Item Part No. Qty. Description
7 606 00 00 56 1 Engine Control Cable(580 R, 580 RS, 580 RSE, 580 RSW)
606 00 00 57 1 Engine Control Cable(600 C)
8 606 00 00 26 1 Switch-Cable Anchor(580 RSE)
9 606 00 00 19 1 Cable Anchor-Right Hand
10 606 00 00 39 2 Bolt-Round Head Square Neck .25-20 x 1.25(580 R, 580 RS, 580 RSE, 580 RSW, 600 C)
606 00 00 39 1 Bolt-Round Head Square Neck .25-20 x 1.25(580 BBC)
11 606 00 00 49 5 Nut-Locking-Center .25-20(580 R, 580 RS, 580 RSE, 580 RSW, 600 C)
606 00 00 49 4 Nut-Locking-Center .25-20(580 BBC)
12 606 00 00 61 3 Cable Tie
13 606 00 00 58 1 Throttle Cable(600 C)
606 00 03 03 1 Throttle Cable(580 BBC)
14 606 00 00 22 1 Brace-Speed Control
15 606 00 00 18 1 Bracket-Speed Control
16 606 00 00 23 1 Link-Handlebar Adjuster Left Hand (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
606 00 00 24 1 Link-Handlebar Adjuster Right Hand (580 RS, 580 RSE, 580 RSW, 580 BBC)
606 00 00 27 2 Handlebar Bracket(600 C)
17 606 00 00 32 6 Washer-Bellville Spring(580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
18 606 00 00 35 2 Bushing-Flange .325 x .50 x .513 x .875(580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
19 606 00 00 50 4 Nut-Locking-Center .31-18
20 606 00 00 42 1 Bolt-Round Head Square Neck .25-20 x 1.38
21 606 00 00 40 1 Bolt-Round Head Square Neck .25-20 x .50 Grade 5
22 606 00 00 59 1 Knob (511, 514-516, 522)
23 606 00 00 21 1 Rod-Speed Control(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
24 606 00 00 55 1 Traction Cable(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
25 606 00 00 38 2 Bolt-Round Head Square Neck .31-18 x 1.00 Grade 5(580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
26 606 00 00 33 2 Shoulder Spacer
27 606 00 00 37 2 Bolt-Round Head Square Neck .31-18 x .75 Grade 5(580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
606 00 00 38 2 Bolt-Round Head Square Neck .31-18 x 1.00 Grade 5(600 C)
28 606 00 00 48 1 Nut-Locking-Center .38-16(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
29 606 00 00 44 2 Washer-Flat-Steel .406 x .812 x .065(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
30 606 00 02 74 2 Washer-Lock .375 x .115 Heavy(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
31 606 00 00 25 1 Pressure Flange(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
32 606 00 00 46 1 Washer-Flat-Steel .281 x .620 x .065(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
33 606 00 00 51 1 Pin-Cotter .06 x .50(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
34 606 00 00 17 1 Shift Link(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
35 606 00 00 16 1 Bell Crank-Speed Control(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
36 606 00 00 15 2 Friction Washer(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
37 606 00 00 14 1 Cap, Rod .375(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
38 606 00 00 20 1 Swivel(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
39 606 00 00 41 1 Bolt-Round Head Square Neck .38-16 x 1.25(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
40 606 00 00 52 1 Pin-Hair-Internal .08 x .18 x 1.18(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
41 606 00 00 28 1 Support Pad(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
42 606 00 00 53 2 Rivet .187 x .575(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
43 606 00 00 47 2 Washer-Flat Steel .219 x .50 x .049(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
44 606 00 00 36 2 Bolt-Hex .31-18 x .75 Grade 5(600 C)
45 606 00 02 76 1 Bolt-Round Head Square Neck .25-20 x 1.75 Grade 5(600 C)
606 00 03 21 1 Bolt-Round Head Square Neck .25-20 x 1.75 XL(580 BBC)
46 606 00 02 75 1 Washer-Flat-Steel .250 x .562 x .049(600 C)
606 00 03 22 1 Washer-Flat-Steel .281 x .62 x .065(580 BBC)
47 606 00 00 47 1 Washer-Flat-Steel .219 x .50 x .049(580 BBC)
48 606 00 03 23 1 Screw-Tapping 10-24 x .50 Hex Washer Head(580 BBC)
49 606 00 03 04 1 Control- Blade Brake/Clutch(580 BBC)
50 606 00 03 24 2 Screw-Machine 10-24X2.00 Hex Washer Head(580 BBC)
51 606 00 03 25 2 Nut-Hex 10-24(580 BBC)
52 606 00 02 72 1 Cable Anchor-Left Hand(580 R, 580 RS, 580 RSW, 600 C)

8
M
OWER
P
AN AND
B
AG
Model
580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
PM0033
1
2
3
4
5
7
9
10
11
10
12
13
14
15
16 17 18
19
20
21
22
37
39
23
24
25 26
27
28
29
30
31
32
33
34
35
8
6
38
36

9
M
OWER
P
AN AND
B
AG
Model
580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
Item Part No. Qty. Description
1 606 00 00 76 1 Bag-ConsumerSilver
2 606 00 00 63 1 Bagger Frame
3 606 00 00 62 1 Door-Catcher Plate
4 606 00 00 97 1 Button Bumper
5 606 00 00 96 2 Bumper
6 606 00 00 92 4 Screw-Tapping 12-24 x .50 Hex Washer (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
7 606 00 00 93 2 Screw-Tapping 10-24 x .38 Pan Head
8 606 00 00 70 1 Plate-Catcher(580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
9 606 00 00 79 2 Bolt-Round Head Square Neck .25-20 x .38
10 606 00 00 78 2 Nut-Push
11 606 00 00 98 1 Spring-Torsion .120 x .68 x 3.09
12 606 00 00 64 1 Pin-Door
13 606 00 01 00 1 Mulch Master Mulcher Accessory
14 606 00 00 88 2 Nut-Locking-Flange .25-20
15 606 00 00 81 2 Bolt-Round Head Square Neck .25-20 x .75 Grade 5
16 606 00 00 67 1 Hinge Base Weldment
(
580 RS, 580 RSW, 580 BBC
,
600 C)
606 00 03 16 1 Hinge Base (580 R)
17 606 00 00 85 1 Washer-Flat-Steel .328 x .87 x .179
18 606 00 00 83 2 Washer-Locking .25 x .077
19 606 00 00 90 2 Nut-Hex .25-20
20 606 00 00 69 1 Nut-Wing(580 RS, 580 RSW, 580 BBC, 600 C)
21 606 00 00 68 1 Drive Cover(580 RS, 580 RSW, 580 BBC, 600 C)
22 606 00 00 66 2 Trim Bumper
23 606 00 00 99 1 Mower Pan Head with Decals(580 RS, 580 RSW, 580 BBC, 600 C)
606 00 02 87 1 Mower Pan with Decals (580 BBC)
606 00 02 88 1 Mower Pan with Decals (580 R)
24 606 00 00 82 2 Bolt-Round Head Square Neck .31-18 x .50 Grade 5 (580 RS, 580 RSE, 580 RSW)
25 606 00 00 65 1 Front Panel
26 606 00 00 50 2 Nut-Locking-Center .31-18 (580 RS, 580 RSE, 580 RSW, 600 C)
27 606 00 00 95 3 Grommet-Plastic
28 606 00 00 72 1 Baffle-Center
29 606 00 00 94 3 Screw-Tapping 10-16 x .62 Hex Washer Head
30 606 00 00 77 1 Side Discharge Assembly
31 606 00 00 75 1 Side Discharge Cover
32 606 00 00 44 2 Washer-Flat-Steel .406 x .812 x .065
33 606 00 00 89 2 Nut-Locking-Nylon .312-18
34 606 00 00 80 2 Bolt-Round Head Square Neck .31-18 x .75 Grade 2
35 606 00 00 86 2 Nut-Push .312
36 606 00 00 88 4 Nut-Locking-Flange .250-20(600 C)
37 606 00 00 91 2 Nut-Wing #8-32
38 606 00 00 73 1 Battery Plate (580 RSE)
39 606 00 00 74 1 U-Bolt(580 RSE)

10
BLADE AND BELT
Model 580 R, 580 RS, 580 RSE, 580 RSW, 600 C
Item Part No. Qty. Description
1 606 00 02 26 1 V-Belt 3L Section(580 RS, 580 RSE, 580 RSW, 600 C)
2 606 00 02 20 1 Bolt-Hex .44-14 x 1.25 Grade 5(580 RS, 580 RSE, 580 RSW, 600 C)
3 606 00 02 27 1 Idler-Flat 1.75 x .47(580 RS, 580 RSE, 580 RSW, 600 C)
4 606 00 00 50 4 Nut-Locking-Center .31 -18(580 RS, 580 RSE, 580 RSW, 600 C)
5 606 00 02 22 1 Washer-Flat-Steel .323 x .625 x .062(580 RS, 580 RSE, 580 RSW, 600 C)
6 606 00 02 16 1 Spacer .52 x .45 x .34(580 RS, 580 RSE, 580 RSW, 600 C)
7 606 00 02 15 1 Idler Arm(580 RS, 580 RSE, 580 RSW, 600 C)
8 606 00 02 17 1 Bushing-Flange .325 x .501 x .250 x 1.120(580 RS, 580 RSE, 580 RSW, 600 C)
9 606 00 00 36 1 Bolt-Hex .31-18 x .75 Grade 5(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
10 606 00 02 25 1 Nut-Locking-Center .44-14(580 RS, 580 RSE, 580 RSW, 600 C)
11 606 00 02 28 1 Spring, Tension .043 x .44 x 3.31(580 RS, 580 RSE, 580 RSW, 600 C)
12 606 00 00 03 1 Blade, 21" Mower
13 606 00 00 43 1 Washer-Locking .38 x .094
14 606 00 02 19 1 Bolt-Hex .38-24 x 2.00 Grade 8
15 606 00 02 23 1 Washer-Flat Steel .390 x 1.50 x .125
PM0141
1
2
3 4
5
6
7
8
9
10
11
12
13
14
15

11
ENGINE AND ELECTRICAL
Model 580 R, 580 RS, 580 RSE, 580 RSW, 600 C
Item Part No. Qty. Description
1 606 00 02 36 1 Key with Cap(580 RSE)
2 606 00 02 47 1 Cap-Ignition Switch(580 RSE)
3 606 00 02 42 1 Nut, Panel .625-32(580 RSE)
4 606 00 02 39 1 Washer-Locking Internal .625 x .045(580 RSE)
5 606 00 03 20 1 Switch, Key Electric Start-LM(580 RSE)
6 606 00 03 19 1 Harness, Wire LM-Electric(580 RSE)
7 606 00 02 34 1 Battery (515)(580 RSE)
8 606 00 02 30 1 Battery Charger(580 RSE)
9 606 00 02 32 1 Recoil Start Handle
10* 1 Engine, Robin 6 HP 4 Cycle(600 C)
1 Engine, Briggs & Stratton Intek OHV 6.5HP Recoil(580 R, 580 RS, 580 RSW)
1 Engine, Briggs & Stratton Intek OHV 6.5HP Electric Start(580 RSE)
11 606 00 02 33 1 Adapter, Blade .875 Dia with Keyway(580 R, 580 RS, RSE, RSW)
606 00 02 29 1 Adapter, Blade(600 C)
12 606 00 02 44 2 Key-Woodruff .156 x .625 x .25 SAE #6(580 R, 580 RS, 580 RSE, 580 RSW)
606 00 02 44 1 Key-Woodruff .156 x .625 x .25 SAE #6 (600 C)
13 606 00 02 45 3 Screw-Tapping .38-16 x 1.00 Hex Washer Head
14 606 00 00 50 2 Nut-Locking-Center .31-18(600 C)
15 606 00 02 41 4 Washer-Flat-Steel .312 x .734 x .065(600 C)
16 606 00 01 99 1 Washer-Locking .312 x .097 Heavy(600 C)
17 606 00 02 38 2 Bolt-Hex .31-18 x 1.25 Grade 5(600 C)
18 606 00 00 36 1 Bolt-Hex .31-18 x .75 Grade 5(600 C)
*See your Dealer for Engine SpeciÞcations
Briggs & Stratton
Engine
Robin
Engine
PM0133
1
2
3
4
5
6
7
10
8 9
11
15
13
14
12
16
17
18
15
14
17
1313
19
19 606 00 03 29 1 Fuel Cap (Robin 6 HP engine only - for other brands, call your engine parts supplier)

12
ENGINE-BBC
Model 580 BBC
Item Part No. Qty. Description
1 606 00 02 93 1 Bracket- Spring Retainer
2 606 00 02 94 1 Pulley- Blade Brake/Clutch
3 606 00 02 28 1 Spring-Tension .1278 x .735 x 4.71
4606 00 03 17 1Screw-Socket Head-Special .375-24 x 1.50
5 606 00 03 07 1 Washer-Wave .88 x 1.31 x .125
6 606 00 02 32 1 Recoil Start Handle
7* 1 Engine, Briggs & Stratton Intek OHV 6.5HP Recoil
8 606 00 02 90 1 Blade Brake Clutch
9 606 00 02 45 3 Screw-Tapping .38-16 x 1.00 Hex Washer Head
10 606 00 02 44 2 Key-Woodruff .156 x .625 x .25
11 606 00 02 26 1 V-Belt 3L Section
12 606 00 02 20 1 Bolt-Hex .44-14 x 1.50 Grade 5
13 606 00 02 27 1 Idler-Flat 1.75 x .47
14 606 00 00 50 1 Nut-Locking-Center .31 -18
15 606 00 02 22 1 Washer-Flat-Steel .323 x .625 x .062
16 606 00 03 02 1 Bushing-Sleeve .469 x .750 x .430
17 606 00 02 15 1 Idler Arm
18 606 00 02 17 1 Bushing-Flange .325 x .501 x .250 x 1.120
19 606 00 00 36 1 Bolt-Hex .31-18 x .75 Grade 5
20 606 00 02 25 1 Nut-Locking-Center .44-14
21 606 00 02 28 1 Spring, Tension .043 x .44 x 3.31
22 606 00 02 91 1 Blade- Blade Brake/Clutch
23 606 00 03 27 2 Washer-Locking .44 x .109 Regular
24 606 00 03 28 2 Bolt-Hex M10 x 1.5 x 25
*See your Dealer for Engine Specifications
PM0451
1
2 3
4
5
6
7
8 9
10
11
12
13
14
15 16
17
18
19
20
21
22
23
24
10

13
SWIVEL WHEELS AND BRACKETS
Model 580 RSW
Item Part No. Qty. Description
1 606 00 01 51 2 Ring-Retaining-External .625 x .042
2 606 00 01 53 2 Washer-Flat-Steels .630 x 1.005 x .062
3 606 00 01 47 1 Mount with Bushing, Right Arm
606 00 01 48 1 Mount with Bushing, Left Arm
4 606 00 01 56 2 Pin-Clevis .25 x 1.75
5 606 00 00 82 6 Bolt-Round Head Square Neck .31-18 x .50 Grade 5
6 606 00 01 36 6 Nut-Hex .312-18
7 606 00 01 57 2 Fitting-Lube .25-28 x .256
8 606 00 01 46 2 WheelYoke Weldment
9 606 00 01 55 2 Pin, Bowtie Cotter
10 606 00 01 43 2 Axle Tab
11 606 00 01 44 2 Pin-Clevis .494 x 2.62
12 606 00 01 45 2 Ring-Kickout
13 606 00 02 80 2 Wheel-7.50 O.D. Steel Swivel
PM0073
1 2
3
4
5
6
7
8
9
10
11 13
12

14
WHEELS AND ADJUSTERS
Model 580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
Item Part No. Qty. Description
1 606 00 01 42 1 Rear Protective Guard, Self Propelled(580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
606 00 03 15 1 Rear Protective Guard, Push (580 R)
2 606 00 00 51 3 Pin-Cotter .06 x .50
3 606 00 01 08 1 Rod
4 606 00 01 41 4 Knob (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
606 00 01 41 2 Knob (580 RSW)
5 606 00 01 04 2 Height Adjustment Lever
6 606 00 01 27 9 Bolt-Round Head Square Neck .31-18 x .62 (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
606 00 01 27 13 Bolt-Round Head Square Neck .31-18 x .62 (600 C)
7 606 00 00 48 2 Nut-Locking-Center .38-16
1 2 3
4
5
6
7
8 9
10
11
12
13 14
15
16
9
17
18
19 4
12 21
20 21
22
23
24
25
26
27
28
9
29
19
PM0065
30 32
34
34
6
33
9

15
WHEELS AND ADJUSTERS
Model 580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
Item Part No. Qty. Description
8 606 00 01 19 2 Handlebar Stud
9 606 00 00 50 8 Nut-Locking-Center .31-18 (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
606 00 00 50 12 Nut-Locking-Center .31-18 (600 C)
10 606 00 01 09 1 Rear Axle (580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
606 00 03 10 1 Rear Axle Push Mower (580 R)
11 606 00 01 28 1 Bolt-Round Head Square Short Neck .31-18 x 1.00
12 606 00 01 25 4 Ring-Retaining-External .500 x .042
606 00 01 25 2 Ring-Retaining-External .500 x .042
13 606 00 01 30 2 Washer-Flat-Steel .505 x .880 x .072
14 606 00 02 78 1 Wheel,Left Hand Rear (580 RS, 580 RSE, 580 RSW, 580 BBC)
606 00 02 79 1 WheelRight Hand Rear (580 RS, 580 RSE, 580 RSW, 580 BBC, 600C)
606 00 03 09 2 Wheel, Push (580 R)
15 606 00 01 10 2 Spacer Tube (580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C)
606 00 03 11 1 SpacerTube-Push Left Hand (580 R)
606 00 03 12 1 SpacerTube-Push Right Hand (580 R)
16 606 00 01 23 2 Bushing-Flange .312 x .500 x .344 x .880
17 606 00 01 14 1 Rear Quadrant-Left Hand
606 00 01 15 1 Rear Quadrant-Right Hand
18 606 00 01 07 1 Bracket-Handlebar Mounting-Right Hand
606 00 01 06 1 Bracket-Handlebar Mounting-Left Hand
19 606 00 01 36 10 Nut-Locking-Flanged .31-18 (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
20 606 00 02 77 2 Wheel-Front (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
21 606 00 01 32 6 Washer-Flat-Steel .520 x .827 x .062 (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
22 606 00 01 26 2 Bolt-Hex .31-18 x 1.00 Grade 5 (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
23 606 00 01 23 2 Bushing-Flange .312 x .500 x .344 x .880 (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
24 606 00 01 03 2 Lever, Front Height Adjustment (580 RS, 580 RSE,)
25 606 00 01 01 1 Left Hand Bracket Assembly
606 00 01 02 1 Right Hand Bracket Assembly
26 606 00 01 20 1 Front Axle (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
27 606 00 01 12 1 Front Quadrant, Left Hand (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
606 00 01 13 1 Front Quadrant, Right Hand (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
28 606 00 00 82 4 Bolt-Round Head Square Neck .31-18 x .50 Grade 5 (580 R, 580 RS, 580 RSE, 580 BBC, 600 C)
29 606 00 00 89 1 Nut-Locking-Nylon .31-18
30 606 00 01 05 1 Rear Adjuster Bracket-Left Hand (580 RS, 580 RSE, 580 RSW, 600 C)
606 00 01 11 1 Rear Bracket and Bearing Assembly - Right Hand (580 RS, 580 RSE, 580 RSW)
606 00 01 17 1 Rear Adjuster Bracket-Right Hand (600 C)
31 606 00 01 30 2 Washer-Flat-Steel .505 x .880 x .072(580 R, 580 RS, 580 RSE, 600C)
32 606 00 01 22 1 Bearing-Ball .625 x 1.383 x .50 (600 C)
33 606 00 01 16 1 De-Thatcher Retainer Weldment (600 C)
34 606 00 03 08 4 Cap, Hub

16
FRICTION WHEEL AND DRIVE
Model 580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
Item Part No. Qty. Description
1 606 00 01 59 1 Gear Cover
2 606 00 01 90 2 Ring-Retaining-External .438 x .035
3 606 00 00 92 5 Screw-Tapping 12-24 x .50 Hex Washer Head
4 606 00 01 32 2 Washer - Flat - Steel .520 x .827 x .062
5 606 00 02 01 1 Washer - Flat - Steel .531 x 1.00 x .063
6 606 00 01 68 1 Idler Gear
7* 606 00 01 84 1 Bearing - Ball .50 x 1.38 x .437
8 606 00 01 72 1 Retainer
9 606 00 01 74 1 Idler Shaft
10 606 00 02 13 1 Differential Assembly
11* 606 00 01 22 2 Bearing-Ball .625 x 1.383 x .50 (600 C)
47
49
51
52 53
54
55
PM0080
1
2
3
4
5
6
7
4
8
9
10
2
11
56
43
12
13
14
15
16
17
18
19
20
21
22
13
23
24
25
26
27
28
29
3
30
31
32
33
34
35 36
37
38
39
40
41
42
46
44
45
38
56
48
50
46

17
FRICTION W HEEL AND D RIVE
Model 580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC, 600 C
Item Part No. Qty. Description
12 606 00 01 81 1 Gear-Pinion
13 606 00 01 85 2 Bearing - Ball .562 x 1.375 x .437 (600 C)
14 606 00 01 75 1 Drive Mount
15 606 00 02 12 1 Spring-Tension .051 x .60 x 2.25
16 606 00 01 73 1 Drive Actuator Weldment
17 606 00 01 80 1 Pivot Channel Weldment
18 606 00 00 50 2 Nut-Locking-Center .31-18
19 606 00 00 45 2 Washer-Flat-Steel .344 x .688 x .065
20 606 00 01 27 2 Bolt-Round Head Square Short Neck .31-18 x .62
21 606 00 01 63 1 Rod-Guide
22 606 00 01 98 1 Washer - Flat - Steel 1.390 x 2.00 x .020
23 606 00 00 78 2 Push Nut .25
24 606 00 01 93 2 Pin-Roll .125 x .50 (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
606 00 01 94 2 Pin-Roll .125 x .63 ((600 C)
25 606 00 01 61 2 Shift Link
26 606 00 01 60 1 Shift Arm Weldment
27 606 00 01 62 1 Retainer Plate
28 606 00 01 64 1 Hex Shaft
29 606 00 01 92 2 Pin - Roll .188 x .88
30 606 00 01 77 2 Thrust Plate (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
31 606 00 02 11 4 Screw-Tapping 10-24 x .375 Hex Washer Head (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
32 606 00 01 78 1 Guide-Plate (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
33 606 00 02 14 1 Friction Wheel Assembly (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
34 606 00 02 05 1 Nut-Hex .31-18
35 606 00 01 99 1 Washer-Locking .312 x .097 Heavy
36 606 00 02 03 1 Washer Flat-Steel .328 x .875 x .062
37 606 00 01 65 1 Friction Sheave
38 606 00 01 88 2 Bearing-Ball .625 x 1.375 x .43
39 606 00 02 00 1 Washer- Flat-Steel 1.062 x 1.344 x .032
40 606 00 01 66 1 Spindle, Bearing
41 606 00 01 67 1 Bearing, Retainer
42 606 00 01 97 1 Bolt-Round Head Square Neck .31-18 x 1.75 Grade 5 (600 C)
43 606 00 01 89 2 Ring-Retaining-External .579 x .930
44 606 00 01 79 1 Friction Ring (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
45 606 00 01 76 1 Friction Wheel Hub (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
46 606 00 00 92 4 Screw-Tapping 12-24 x .50 Hex Washer Head (580 R, 580 RS, 580 RSE, 580 RSW, 580 BBC)
606 00 00 92 8 Screw-Tapping 12-24 x .50 Hex Washer Head (600 C)
47 606 00 01 95 3 Bolt-Hex .25-20 x .50 Grade 5 (600 C)
48 606 00 01 82 1 Disc, Friction (600 C)
49 606 00 01 71 1 Hub, Friction Wheel (600 C)
50 606 00 00 49 3 Nut-Locking-Center .25-20 (600 C)
51 606 00 01 70 1 Bearing Plate (600 C)
52 606 00 01 69 1 Bearing Retainer (600 C)
53 606 00 01 86 1 Bearing Ball 1.00 x 2.00 x .56 (600 C)
54 606 00 01 58 1 Bearing Retainer (600 C)
55 606 00 01 91 1 Ring-Retaining - External 1.00 x .042 (600 C)
56 606 00 01 57 2 Fitting-Lube .25-28 x .256 ((600 C)
* Available as individual components or part of 606 00 02 71 Service Kit which consists of (2) 606 00 01 88, (1) 606 00
01 84 , (2) 606 00 01 85 and (2) 606 00 01 22.
Key # 33 was a friction wheel assembly which had a rubber ring on a plastic hub. The plastic hub in NLA from the
supplier. The replacement is a complete assembly with new brackets and a new friction wheel. (Dec 2008)

18
ELECTRICAL AND CONTINUITY DIAGRAM
Model 580 BBC
PM0470
PM0480
KEY SWITCH
RED
REDRED
ENGINE
1
3
BLACK
BATTERY
BLACK
2
4
1
3
2
4
BLACK
AB
S
B
BROWN
3 AMP
STARTER
S
B
Key Switch
OFF POSITION
START POSITION
The diagram below shows the various states of connection for electrical components.
The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
S
B
(606000320)

01192500A