i365gps A12 User manual

A12 User Manual
Please read the instruction manual before using, in order to properly installed and rapid use!

1. Application method
1. Before using, please test equipment model is correct, accessories are complete.
2. In shutdown state insert support GSM network micro SIM card (GSM 850,900,1800,1900MHZ)
and order the caller ID function and monthly mobile internet traffic data from your mobile operators (it
must be GPRS traffic, not less than 30 MB/month traffic package). Please note that this product only
supports GPRS internet.
3. Power on: press on the power button for 3 seconds or more then powered on.
4. Shutdown: When mobile phone APP display equipment online, through the app setting remote
shutdown function to turn it off.
When mobile phone APP display equipment offline, long press the power/SOS button for power off.
5. Charge: Connect one end of the charging cable to USB port of laptop and the other end with the
end with GPS watch tracker for charging
6. Record the ID number of the device
Around the outside of the box, you will find ID number (ten numbers). Please remember or record it
down in your laptop. Please don’t forget this ID number, it is very important. Remember they will be used
in the process of logging in.
2. Installation method
1. Open the gap along the card Slot 2. Chip down insert the card Slot

3. Equipment parameters
Positioning: GPS + BD + Wi-Fi + LBS + AGPS auxiliary positioning
Positioning accuracy: GPS location 5 to 20m Wi-Fi location 20 to 50m LBS location 50 to 1000m
Device size: 20mm (Radius) x 12mm (Thickness)
Battery capacity: 400mAh Standby time: 4days
Indicator light
Power/SOS button
The charging contact
Hang hole

4. Product function
1. Time display
2. Real-time tracking
3. Historical route
4. Geo-fence
5. Voice monitoring
6. Do not disturb mode
7. Find locator
8. Other functions setting
5. Function declaration
5.1 Time display
On short press the power/SOS button, the Hour indicator light flash for 1 sec, after 1/2 sec, the min
indicator flash twice.
5.2 Real time tracking
Choose real time tracking, click the icon then can check where the locator is.
5.3 Trajectory tracking mode settings and query
There are three kinds of tracking mode. Users through setting in the phone APP software function to set
the working mode.
1. Rapid positioning (1 minute) : equipment at 1 minute intervals update location information, rapid
positioning model the locator use battery faster.
2. Standard positioning (10 minutes) : equipment according to the time of 10 minutes interval
update location information.
3. Save electricity positioning (an hour): equipment in one hour time interval update location
information, the power-saving mode use battery is slowly
This device can keep 3 months of route information. If two anchor point position is very close, this
product will be in the route filter position very close point

5.4 Geo-fence
Users in the cell phone APP choose Geo-fence function, on the map can set Geo-fence round, if the
device away from fences, mobile phone APP client-side will display the alarm information. Alarm
information time is related to the positioning interval time setting, The smaller positioning time interval
can get timely alarm information.
5.5 Voice monitoring
Select voice monitoring function in setting up and fill in your mobile phone number, wait for a while
and after confirmation equipment will be sent a calling to your number, you can listen to the voice around
locator after answering. After set up the white list, the inside of white list number will send a calling to
device, device will automatic answer, can listen to the voice around locator.
5.6 Do not disturb mode
Do not disturb mode, mainly is to prevent the locator sound disturb which one carrying the locator.
Total can be set up four groups timing, during the time interval, unable to call the locator.
5.7 Find locator
Choose find locator, confirm the command when the device is in normal network connection, will
make a sound, easy to find the locator.
5.8 Other settings
There are many other functions, users can operate through mobile APP.
Set SMS command can give equipment issued commands (Specific text instruction content, please
consult the merchant.

6. Key description
When shutdown state with enough power long press power/SOS key locator will starting up.
Locator online cannot shut down manually, under the condition of locator offline can press power key to
turn it off manually. As long as you have set up the emergency call number, when locator online, long
presses power key/SOS, locator will dial the emergency call number.
7. Light effect show
Starting up: indicator light for seconds.
Charging: In charging process indicator light long time turn on, after full indicator light turn off.
Keys (query time): the Hour indicator light flash for 1 sec, after 1/2 sec, the min indicator flash twice.
Connect to the server exception: light flash is slow
8. Setup APN for access of network
SIM card in some countries need to setup APN before access to GPRS network, please contact the SIM
card operator or check the website of the SIM card for the APN information.
Setup APN
Command format
(SMS format)
Example (manually send
following SMS from mobile
phone to GPS locator )
After you send SMS,
feedback will return
SMS to you as
following
pw,123456,APN,APN
name,user name,pas
sword,MCCMNC#
If your APN name=wap.tmobil.cl,
user name=wap, password=wap,
MCC=730, MNC=02,
then you can send this SMS to
your GPS Locator:
pw,123456,apn,wap.tmobil.cl,wap
,wap,73002#
APN:wap.tmobil.cl;user:
wap;password:wap;user
data:73002.

Remarks:
Use your mobile phone, send above SMS command to the GPS tracker SIM card. After you send the
SMS command, please check if you get a set up success replied SMS from GPS locator.
Command format:
pw,123456,apn,apn name,user name,password,MCCMNC#
Example: BSNL SIM card, the APN name is bsnlnet, user name null, password null, MCC=404, MNC=80
Then send sms command: pw,123456,apn,bsnlnet,,,40480#
(Note: If the user name and password is null, you still need to keep the comma symbol as above)
APN will set successfully after you get the reply SMS from GPS locator.
Note: Each operator’s APN information is different, please contact the operator for their APN and MCC,
MNC information, thanks.
9. Software client-side
9.1 Scan the QR code download software APP “AIBEILE” to cell phone client-side.
APP for Android system APP for IOS system
9.2 For PC：http://en.i365gps.com/
Login by ID no.
9.3 For Android,
You can download the app from "google play" by searching "AIBEILE"
For Iphone,
You can download the app from "app store" by searching "AIBEILE"
Note: the installation process prompts whether to trust this program, or whether to allow access
to mobile phone location, please choose trust or allow.

9.4 Open APP client-side, choose device login in, equipment number please type device ID number on
box(ten number)，default passwords as 123456, Finally click login to the main menu. (Advice for the first
time after landing please amend and remember the passwords)
Landing interface Main menu
Real-time tracking Historical tracking

Set Geo-fence Setting interface
Chapter 1 Troubles & Shooting
Troubles
Shootings
Device is not enabled on app
1. Check the SIM card
Maybe 1- If the SIM card is installed correctly.
Maybe 2- If open the 2G GPRS traffic data.
Maybe 3- If the SIM card in debts
2. Check if the ID of the device is the same as text feedback
Send SMS "pw,123456,ts#" command to the gps tracker to see the
SMS feedback
3. Check the server
Send SMS "pw,123456,ts#"
Maybe 1- Check IP and Port
Maybe 2- If the APP platform in debts
4. APN is not setup
Send SMS to set APN
Device is offline on APP
Maybe 1- SIM card is no signal, suggest go outdoors to locate
Maybe 2- If SIM card support 2G - GPRS internet
Maybe 3- If SIM card internet GPRS is canceled
Maybe 4- If SIM card is in debts

Positioning is not accurate
Check from the APP if the positioning signal type is GPS or LBS or
WIFI
1. GPS positioning is only available in the outdoor, the accuracy is
around 5-15 meters.
2. LBS positioning is mainly for indoor positioning, the accuracy is
around 100-1000 meters.
3. WIFI positioning is mainly for indoor; the accuracy is around
15-200 meters in most cities.
Chapter 2 Main SMS command summary sheet
Command items
Command
format(SMS format)
Example(manually
send following SMS
from mobile phone to
GPS locator )
After you send SMS,
there will be
feedback(SMS returns
from GPS locator to
your mobile phone)
Setup center number
pw,123456,center,xxxxx
xxxxxx#
pw,123456,center,136
40927062#
Central number ：
13640927062. setup
success!
Setup APN
pw,123456,apn,apn
name,user name,passw
ord,MCCMNC#
pw,123456,apn,wap.t
mobil.cl,wap,wap,7300
2#
APN:wap.tmobil.cl;user:
wap;passwork:wap;user
data:73002.
Setup the upload time
interval
pw,123456,upload,x#
pw,123456,upload,300
#
Upload time
interval:300S;setup
success!; upload ：
300s;ok!
Inquiry the URL for map
pw,123456,url#(need
the platform support)
pw,123456,url#
[GPS]
http://maps.google.com.
hk/maps?q=N22.568657
,E113.8663225
[BASE]
http://maps.google.com.
hk/maps?q=N22.568657