IDEAL IR2-451V User manual
1/3” Color Weatherproof IR Camera Built-in Vari-Focal Lens
MODEL: IR2-451V
FEATURES
zBullet color camera with SONY 1/3” 960H Super HAD II high resolution CCD sensor.
zEmploys Digital Signal Processor (DSP) chip-set for image control.
zHorizontal resolution of 700TVL. Pixel number: NTSC=480K / PAL=570K.
zHigh sensitivity, low smear, high anti-blooming and high S/N ratio.
zBuilt-in anti-aliasing and IR-pass (850nm) optical filter.
zBuilt-in IR-LED x 48 units, CCD color image automatically changes into B/W image in low light environments.
zControlled by OSD (On Screen Display) menu in 8 languages.
SPECIFICATIONS
Model IR2-451V
Image Pick-up Device SONY 1/3” 960H Super HAD II CCD High Resolution
Effective Picture Elements NTSC: 976*494, PAL: 976*582 (H*V)
Horizontal Resolution 700 TV lines
Minimum Illumination 0.01LUX / F1.4, 0 LUX / IR
S/N Ratio More than 54 dB
Control OSD (On Screen Display) Control on Cable
Language English, Français, Deutsch, Español, Português, Русский,日本語, 中文
Auto Electronic Shutter NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/110,000s
Gain Control OFF / LOW / MIDDLE / HIGH
White Balance ATW (1,800°K~10,500°K)
Gamma Characteristic 0.45
Basic Functions
Lens Selection: [DC / Manual]
Shutter Selection: [Auto, 1/60, FLK, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/5000, 1/10000, 1/100000]
White Balance: ATW / AWB / AWC / ANTI.CRL / Manual Selection
BLC: OFF/BLC/HLC/ Selection
D&N: Color / Auto / BW / EXT Selection
DPC (Dead Pixel Correction)
Extend Functions
Camera ID : ON / OFF
Motion Detection : ON / OFF (4 areas, Position / Size / Sensitivity)
Privacy Zone : ON / OFF (8 Zones, Position / Size / Color)
PARK.LINE : ON / OFF
Mirror : ON / OFF
2DNR : ON / OFF
DWDR : ON / OFF
LENS SHADING : ON / OFF
NEG. IMAGE : ON / OFF
DISPLAY : CRT / LCD / USER
Lens Furnished 1.3 Mega Pixel 2.8~12mm / F1.4 Vari-Focal Lens
Synchronous System Internal, Negative Sync.
Video Output 1 Vp-p Composite Video / 75 ohm
Power Supply DC12V (Option: Built-in AC110V / AC230V Power Adaptor)
Operating Temp. -10°C to 50°C (14°F to 122°F)
Water Resistance IP66
IR LED / Projection Distance 48 Units of High Efficiency 850nm IR LED / 50 Meters
Dimensions 312*146*115mm (L*W*H)
1. NEAR FAR (Focus Adj.)
2. WIDE TELE (2.8-12mm Adj.)
ADJUSTMENT
APPLICATIONS
zLong range IR illumination for outdoor and open spaces.
zPerimeter security, building entrances, parking lots.
⑨
The lightning flash with arrowhead symbol, within an equilateral triangle, is
interned to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Warning
1. Ask a qualified service person for maintenance when you
encounter any problems.
2. Install the camera away from TV, radio transmitter, magnet,
electric motor, transformer, audio speakers because the
magnetic fields generated from above devices will distort the
video image.
3. Place this camera on a solid base. Install the camera away
from stoves or other heat generating devices as the high
temperature could cause deformation, discoloration or other
damages to the camera. Install the camera at where the temp.
range will stay between -10°C~50°C (14°F~122°F)
4. Do not expose and operate the camera in the rain and humid
areas.
5. Only use soft dry cloth to clean the camera. Also use lens
tissue or cotton tipped applicator and ethanol to clean glass.
Parts Names
① Sunshield
② Camera Lens
③ High efficiency infrared LED
④ CDS control
⑤ Far / Near Adjustment
⑥ Wide / Tele Adjustment
⑦ Lift lid: Unscrew to open
Installation Instructions
(1) Connect the video output wire between monitor and camera
through 75ohm type coaxial cable.
(2) Connect the power cord input.
(3) Fix camera to the bracket.
④ ⑦⑤⑥ ⑦
▲ Before attempting to connect this product, please read and
keep this manual for future use.
①
②
③
Holes for video and
power wires
Screws to fix bracket
Front View
