iDeaUSA CT704 User manual

Tablet PC CT704
User Manual

Disclaimer
1 Thanks very much for purchasing our MID product! Before using this
product, please read the manual carefully.
We will consider that you have read this manual when you use this product.
2. The functions information of this manual is subject to the product itself; we
will keep developing new functions. The information in th-is manual is subject
to change without any prior notice.
3. The Company will not be responsible for any loss of personal da- ta and
damage caused by incorrect operation of software/Hardwa- re, artificial
damages, replacement of batteries or any other accid- ent. To avoid loss of
your data, please backup your data to your co- mputer at any time.
4. We can not control any dispute from users misunderstanding or incorrect
operation against the manual, the Company will not take any relevant
responsibility for any accidental loss potentially occu- rring in the process of
using this manual.
5. Please do not repair it by yourself, otherwise, we will not provide you with
after-sale service.
6.Our Company reserves the final explanation right to this manual and other
relevant information
Preface
Dear Customers,
Thanks very much for purchasing our product! This device is built-in high
performance Wifi receiver module, supporting external 3G USB-DONGLE
wireless network card, turning on the broadband wireless networks, breaking
through the restraint of network cable; it will bring you into the portable media
player world and fulfill your entertainment needs. It also support picture
browsing, E-book Re- ader, games, online chat and other functions, various
settings will fully show your individuality.
Safety notices
This manual contains important information, in order to avoid accidents,
please read this manual carefully before you use this product.
● Please do not let the player fall or rub or compact with hard obj- ects during
using, or it may cause surface scratch of the player,ba- ttery loose, data lose
or damages of other hardware.
● Never let this product expose to the humid environment or rain as the
.
1 Overview
1.1 Appearance and Keys
1.2 Basic Operation
1.2.1 Switch ON
1.2.2 Unlock the Screen
1.2.3 Lock the screen
1.2.4 Switch OFF
1.2.5 Restart the device
1.2.6 Battery charging
1.2.7 Switch input methods
1.2.8 Use T-Flash card
1.2.9 Connected to the computer
1.2.10 Browse the file in the device
1.2.11 Startup programs
1.2.12 Close programs
1.2.13 Screen operation
1.2.14 Home screen
1.2.15 Screen gestures
1.2.16 Security setting
1.2.17 Display setting
1.2.18 Wireless And Network Settings
1.3 Technical specifications
1
1
1
1
2
2
2
2
2
3
3
4
4
5
5
5
5
6
6
7
8
9
Contents

1 Overview
1.1 Appearance and Keys
1.2 Basic Operation
1.2.1 Switch ON
When the device is in the OFF mode, press and hold artup
progress bar, then you can enter to the system desktop.
.
water leaked into may disable it to the extent beyond maint- enance.
● You are recommended not to use the headset with large volume
continuously, please adjust the volume to the size of appropriate security and
control the using time to avoid the damage to your he- aring, as excessive
volume will cause permanent hearing damage.
● Please do not cut off the power abruptly during software update and
download, or it may cause date loss and system error.
● Please dont turn on the device where the wireless equipment is forbidden
or when the usage of the device will cause interferenc- e and danger. Please
observe any relevant restrictions.
● Please use original accessories and batteries, do not use incompatible
products.
● Please dont use the device in gas station or nearby the fuel an- d
chemicals.
● Please dont use this product when you are driving or walking in the street,
or it may cause an accident.
● Please do not scrape the TFT screen, it may be damaged and can not be
display anything.
● Never clean the device with any chemicals and detergent, or it will damage
the product surface and corrode the spray paint
Packing list
Welcome to purchase this product , when you open the package , acceptance
of the following:
Attention: Accessories are subject to the real products and change without
notice.
Components
MID Device
Quantity
1
1
1
1
1
Item
1
2
3
4
5
Symbol Name
4 Power
5 TF Card TF Card Slot
USB Cable
Adapter
Warranty Card
User Manual
Description
1
3
4
5
6
7
8
9
12
Press shortly to enter sleeping/waking up
mode,press long to switch ON/OFF
6 Earphone jack Stereo earphone jack
8 USB port
To avoid damaging , recommend use of
the special charging equipment
7 Charger Port
Connect with PC
ESC Press shortly to return
1
2
Volume+/
Volume - Volume increase/ Volume reduce
3 Front Camera Built - in 0.3 Megapixel camera
9 OTG port Connect with mouse and keyboard

indicating lamp of the device is in high light blue color, the desktop
icon of the battery keep rolling which shows it isit is connected
to the device.
1.2.7 Switch input methods
The device support handwriting, number, letter, pinyin etc.
switching follow:
Click any text input area of the working program interface, it will
popping input keyboard interface, as shown below:
Press , then it will popping Input Method switch interface.Select
the input method you want here.
[Noted] After newly install input method, you should
Settings>Language & input>KEYBOARD & INPUT METHODS,
then you can use.
1.2.8 Use T-Flash card
● Insert T-FLASH card
Insert the T-Flash card into the slot in direction of the devices
bottom shell until you hear a sound of click.
● Browse files in the memory card
In this MID device，you can view and use the needed files in
catologue of MENU>EXPLORER> SD Card.
● Remove T-Flash card
Close all open files from the T-Flash, then enter into MENU>SE-
TTINGS>TF card and & device storage, click Unmount SD card
,System will prompt that TF card was removed safely. Tap with
your fingertips to the pop-up T-Flash Card
[Note]
1. Do not insert the T-FLASH card by force, this card can only be
applied in one direction.
2. Do not remove the TF card before Unmounted it, or the card may
be damaged.
3
2
1.2.2 Unlock the screen
Please press and drag the icon to the , then the LCD will unl-
ocked automatically.
1.2.3 Lock the screen
When the device is in the ON mode, press the POWER key short- ly,
the system will lock the screen and enter the save power mode.
Then the screen is OFF but the system will still operation.
1.2.4 Switch OFF
When the device is in the ON mode, press and hold the POWER
key for 3 seconds, the screen will display the power off interface,
choose the power off item to confirm, the system will shut automat-
ically.
1.2.5 Force shut down the device
Press the power key and hold ten seconds to
.
1.2.6 Battery charging
Insert the micro port of the battery adaptor into 220V AC slot on the
device, and connect the other side with the power socket. Then,yo-
u can charge the device.
[Note] This device is not recommended to use USB interface to ch-
arge, please must use the special power adapter for charging.Yo-
u should charge the battery for at least 8-12 hours to make sure the
battery is fully charged at the first time. On charge the Power
Force shut down
the device

5
1.2.11 Startup programs
Click all the application icon you want to start and it can switch on.
1.2.12 Close programs
Press the icon continuously or the ESC key, the device will clo-
se the active program. You can also use the corresponding functio-
n in the management currently running applications to close the
program.
1.2.13 Screen operation
● Zoom in and zoom out : In applications which support zoom
gestures, such as photo , IE browser, mail and map etc. you can
zoom in or out the screen contents by opening or closing your two
fingers.
● Rolling: In applications which support rolling gestures, such as
photo , IE browser, mail and map etc. you can scroll the screen
contents by sliding your fingers on the screen. If you want to stop
the rolling screen, you just need to touch it.
1.2.14 Home screen
● Switch home screen
In the home state, you can change the home interface by sliding
your fingers on the screen quickly.
● Custom Home Screen
Press the blank area on the home screen interface for a few secon-
3. If the memory card is write-protected, data will not be formatted
and written, please remove the write protection before such opera-
tions
4. Major brands memory card is recommended to avoid the card is
not compatible to this device.
1.2.9 Connected to the computer
One end of the USB line connect to the computer, the other end
connect the MID device, select Settings>Developer options>USB
debugging, the device will connect with computer, and you can
copy files to the device.
1.2.10 Browse the file in the device
4

7
If use the pattern, as below:
1. You must ensure the four-point connection when you draw the
unlock pattern.
2. Click Continue and draw again to confirm it
3. Cilck confirm to complete unlock pattern designing.
4. Each time you open or waking your MID device, you must draw
pattern to unlock the screen.
1.2.17 Display setting
Click Settings > Display, you can set the brightness/ wallpaper/
Auto rotate screen/ sleep/ font size of the screen.
6
ds, it will appear Choose wallpaper from menu, then you can set
the home screen.
● Move application icons in screen
Press the icons of applications you need to move for several seco-
nds, it will enter into the moving model (the icon of application will
be turn big), then drag the icon to desired position directly.
● Move application icons screen to screen
Press the icons of applications you need to move for several seco-
nds, and you can drag the icon to the left side or right side.
● Delete applications
Press the icon of application you need to remove for several seco-
nds, drag the icon to × (when the icon was turn big, the bottom of
screen will appear ×, then you can delete the application.
1.2.15 Screen gestures
● Click
When you need to input by the on-screen keyboard, you just need
to select applications or press the button on the screen, then click
the items.
● Press
When you want to start the available options of a project(such as
web page link), you only need to press the project.
● Slide
Sliding on the interface with your fingers to make vertical or horizo-
ntal dragging action.
● Drag
Before you start dragging, you must press the items with your fing-
ers, and can not let fingers leave the screen before dragging to the
desired position.
● Rotation
Changing the screen orientation by rotating the device laterally.
1.2.16 Security
You can set the unlock pattern, each time you open or wake your
MID device, you must draw pattern to unlock the screen. In
Settings＞Security＞Screen lock, it support many unlock ways.
Slide,Face Unlock,Pattern,PIN,Password”.

1.2.18 Wireless And Network Settings
a) WIFI
Click Settings>Wi-Fi, turn on the wifi, the device will find availabl- e
wireless network in the right interface.
Select the desired wireless network, the system will directly conne-
ct the network or popup the password input window according to n-
etwork access security settings. Please consult your wireless net-
work administrator for the password.
9
1.3 Technical specifications
L191x W116x H10.5 (mm)
Size
Weight
LCD Display
PC Interface
OS
Hard Drive Capacity
System Memory
Capacity Expansion
Music Function
Video Function
Photo browse
WIFI
Camera Function
Working
temperature
Languages
MP3、WMA、WMV、OGG、APE etc
20Hz-20KHz
MKV、AVI、RM、MP4 etc.
1920*1080
4:3/16:9/full screen for optional
802.11b/g/n
Max 54Mbps
2.4GHz
8
Recording Function
Support
7.0 inch 800*480- Multi-point capacitive touch screen
High speed Mini USB
Android 4.1
4GB
1GB
Support T-Flash card 32GB(max)
Format
Max. Resolutions
Format
Max. Resolutions
Screen Ratio
JPG/BMP/JPEG/GIF etc.
Support
Transmission rate
Work Frequency
Front 0.3 megapixel camera
Support
-5-40℃
Simplified Chinese/Traditional Chinese/English/Japanese/
French/German/Spanish etc.
0.30KG

Note: The device has no ad-hoc function.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized changes and modifications to this equipment. Such
changes and modifications could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct eth interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.