Idis DA-LM1100 User manual

This manual is intended for users of the DA-LM1100 pole mounting
bracket. It includes instructions for mounting the DA-LM1100 pole
mounting bracket to a pole.
•This bracket is intended to be used with DC-S series model
of cameras. Do not use it with other models of cameras.
•This installation should be performed by a qualified service
personnel in conformance to all local codes.
•You may need to reinforce the pole. If the pole is not strong
enough to support the camera, the camera may fall.
•Do not use this product for other purposes.
Mounting
Mount the bracket to the pole as follows:
1 Mount the bracket 1 to the pole. Fasten the
bracket 1 to the pole by adjusting the strap
length. You can adjust the strap length by
tightening or loosening the clamp screw.
Pole DIA. 76~230mm (2.99~9.06”)
Pole
Bracket 1
Clamp Screw
Strap [Length max.
750mm (29.53”)]
2 Mount the bracket 2 to the bracket 1.
Bracket 1
Bracket 2
DA-LM1100 INSTALLATION MANUAL

IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
Connect your camera to the bracket as follows:
3 Insert cables from external devices, network
and power adapter into the bracket 2.
4 Connect the camera to the bracket 2 by
turning the universal nut.
Do not turn the camera but turn
the universal nut when connecting
the camera to the bracket 2,
otherwise, the cable will be
twisted.
5 Turn on power.
Bracket 2
Universal Nut
Cable
Camera
Dimensions
Unit: mm (inch)
50 (1.97)
72 (2.83) ±
2.0 (0.08)
136 (5.35) ± 2.0 (0.08)
90 (3.54)
156 (6.14)
116 (4.57)
Ø 49 (1.93)
M10 x 1.5 (0.06)
Ver.1.0