Impresind Cold AIR FPA KITCHEN 5.0 Manual

STP101.131 GB-ed-01-20
ADIABATIC EVAPORATIVE
AIR COOLER
MODEL: FPA KITCHEN 5.0
Installation, Operation
and Maintenance
Instruction Manual

STP101.131 GB-ed-01-20 2
COLD AIR –FPA KITCHEN 5.0

STP101.131 GB-ed-01-20 3
COLD AIR –FPA KITCHEN 5.0
I N D E X
MANUFACTURER...............................................................................................................4
GENERAL INFORMATION..................................................................................................4
User information..................................................................................................................5
SECTION 1 –TECHNICAL CHARACTERISTICS...............................................................6
1.1 Machine identification data .............................................................................................6
1.2 Presentation of COLD AIR Evaporative Cooler Mod. "FPA Kitchen" ......................................6
1.3 Technical characteristics .................................................................................................6
1.4 Intended use .................................................................................................................7
1.5 Electrical boards.............................................................................................................8
1.6 Improper use................................................................................................................. 8
SECTION 2 –PACKAGING, HANDLING AND TRANSPORTATION..................................9
2.1 Receipt ......................................................................................................................... 9
2.2 Handling and transportation............................................................................................ 9
2.3 Lifting ........................................................................................................................... 9
2.4 Unpacking ................................................................................................................... 10
2.5 Storage ....................................................................................................................... 10
SECTION 3 –POSITIONING AND INSTALLATION .........................................................11
3.1 General warnings about installation ............................................................................... 11
3.2 Positioning and installation of FPA-KITCHEN Air Cooler.................................................... 11
3.3 Connection to power supply.......................................................................................... 13
3.4 Connection to the water supply ..................................................................................... 16
4.1 Protection devices ........................................................................................................ 18
4.2 Work-clothing .............................................................................................................. 18
4.3 Residual risks............................................................................................................... 18
4.4 Emergency situations ................................................................................................... 18
SECTION 5 –USE OF FPA-KITCHEN EVAPORATIVE COOLER ............................................19
5.1 Control panel............................................................................................................... 19
5.2 –Description of controls and signals.............................................................................. 20
5.2.1 Control panel description..................................................................................... 20
5.2.2 Signals description.............................................................................................. 21
5.4 Operation .............................................................................................................. 22
5.5 Change of the circulating water ............................................................................... 22
5.6 Shut-down............................................................................................................. 22
5.6.1 Shutdown automatic washing cycle ...................................................................... 23
Notes about the Machine operation ..................................................................................... 23
5.7 Air changes ................................................................................................................. 23
5.8 Commissioning and first start-up ................................................................................... 24
5.9 Seasonal stop .............................................................................................................. 25
5.10 Operation anomalies................................................................................................... 25
5.11 Safety signs onboard the Machine ............................................................................... 26
SECTION 6 –MAINTENANCE .............................................................................................27
6.1 End-season maintenance .............................................................................................. 27
6.2 Pre-season maintenance............................................................................................... 27
6.3 Maintenance safety norms ............................................................................................ 28
6.4 Replacement of the evaporative panels.......................................................................... 30
6.5 Technical assistance request ......................................................................................... 31
SECTION 7 –DISASSEMBLY ..............................................................................................32
7.1 Putting out-of-service ................................................................................................... 32
SECTION 8 –TECHNICAL DRAWINGS ...............................................................................33

STP101.131 GB-ed-01-20 4
COLD AIR –FPA KITCHEN 5.0
MANUFACTURER
GENERAL INFORMATION
PREAMBLE
Dear Customer,
We thank you for choosing an IMPRESIND product and we would like to inform you of the
following:
•The content of this document is for information purpose only and it is subject to
modifications without notice;
•This manual cannot be partially or fully reproduced, transmitted, copied or stored in an
archive system in any mechanical, magnetic, optical, chemical or other form or means
without written authorization by IMPRESIND SRL;
•This manual must be kept and conserved until the final dismantling of the machine; in
case of transfer, it must be handed over to the new owner.
•If a fault occurs causing machine shutdown, IMPRESIND SRL is not liable in any way for
any damage caused by the shutdown and in no way the warranty period is extended.
IMPRESIND SRL
Production site: Via Primo Maggio 24, 20064 Gorgonzola –Milan (ITALY)
[phone]
[phone]
[email protected]
www.impresind.com
© Impresind srl –Marzo 2003

STP101.131 GB-ed-01-20 5
COLD AIR –FPA KITCHEN 5.0
User information
This manual is an integral part of the machine itself; it must be kept and be readily
available to the personnel in charge of use and maintenance of this machine.
Personnel in charge of operation and maintenance of the machine must be fully aware of its
content before putting the machine into service.
In the event of loss or damage to this manual, request a copy immediately by contacting the
Technical Assistance Service at IMPRESIND SRL, referring to the identification data of the
machine, as shown on the machine identification plate and on the cover of the present
manual.
The machine complies with the following European Community Directives:
➢2006/42/EEC Machinery Directive
➢2014/35/EEC Low Voltage Directive
➢2014/30/EEC Electromagnetic Compatibility Directive
➢2009/125/EEC Energy Related Products (ERP) Directive
IMPRESIND SRL declines all responsibility for any damages which may be,
directly or indirectly, caused to exposed persons or property, due to improper
use or use of the machine for different purposes other than the design purposes,
incorrect installation, inappropriate power supply, different or changes to the
installation environment from the one declared during order confirmation,
grave deficiency of maintenance, unauthorized alterations and modifications,
use of non-original spare parts, removal of the protection guards, inobservance
of the instructions for use, negligence, etc.
IT IS ABSOLUTELY FORBIDDEN TO MAKE MODIFICATIONS TO THE MACHINE AND
ITS DESTINATION OF USE.