iMPROV electronics Skin Flik ES11019 User manual

LCD COLOR CHANGING CASE
FROM THE MAKERS OF THE BOOGIE BOARD
™
TABLET
1.
2.
3.
4.
5.
User Guide
Remove plastic tab from
inward facing side of case .
Align Skin Flik case
buttons to corresponding
buttons on iPod.
To attach, press one side
of the iPod against one
side of the Skin Flik case
and then the other.
Insert charms or lanyard*
through loop if desired.
Slowly swipe your nger
across the dots in either
direction to change the
color of the electronic skin.
For iPod touch® 2G/3G
If skin color does not change, increase or decrease speed of swipe.
*Charms and lanyard not included.
4
1

Designed and Assembled in the USA. USA PAT. NO. 6,061,107,
5,889,566, 7,351,506 . iPod touch is a trademark of Apple Inc.,
registered in the U.S. and other countries.
FCC Statement: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Warranty Information: Visit www.improvelectronics.com for details.
800045B Skin Flik LCD Color Changing Case User Guide
Improv Electronics
(a Kent Displays Company)
343 Portage Blvd.
Kent, OH 44240
Model: ES11019
1.
2.
3.
4.
Remove iPod.
Unscrew and open
compartment on inward
facing side of case.
Remove batteries and insert
two fresh CR2016 (3V) batteries,
positive side up.
Replace compartment cover and screw.
To replace battery:
For more information, go to
www.improvelectronics.com