in2digi D-JV-2 How to use

On start up select Audio Video Menu
from the touch screen button or from the
hard key button
To select the preset station as part of the preset list. First
skip through the stations using “ “ button on HU
and once you find the station that you want to put in a pre-
set list press and hold the blank buttons “-x-” on the DAB
page for up to 2 seconds and this action will create a pre-
set of that station to that number on the button.
Starting up Digital Radio Guide
On first power up press Auto-tune button
to scan for any digital radio stations that
have been recognised by the digital
receiver.
During auto-tune/scanning this may take a minute or so
depending on how many ensembles the DAB Receiver
finds in that area. Progress can be seen by the
percentage bar being displayed on the screen. .
On the last line this will be 1 of XX that the
search has found
i n 2 d i g i D -JV-2 S e r i e s
D i g i t a l R a d i o
USB Host Interface
DAB Antenna connector
MOST 2 FO Connector
Power

i n 2 d i g i D -JV-2 S e r i e s
D i g i t a l R a d i o
Settings and Information Menu(1)
6) Announcements types can be selected
that the user wishes to be notified and if
these are announced on the DAB tuner
appropriate announcement message will
be displayed.
4) Various options on digital radio for
Europe or UK can be selected.
5) Pressing announcements page will
and various announcement types will be
displayed
7) Selecting “DAB Format “ button will
allow user to select different DAB fre-
quency that the user can select.
But the in2Digi D-JLR series unit has
been pre– configured to support UK and
all European DAB III frequencies and his
will support (DAB/DAB+/DMB)
L—Band on this variant is not support
currently.
8) Selecting “PTY” Programme Type will
allow user also the ability to select sta-
tions subscribed to these programme
types
1) Press and hold the blank buttons “-x-” on the DAB
page for up to 2 seconds and this action will create a
preset of that station to that number on the button.
Up to 18 presets stations can be created and these are
split over 3 x DAB pages (DAB1,DAB2 and DAB3).
2) To display Dynamic Label Segment
(DLS) being transmitted by the station . By
pressing “>“ on the display a pop up dis-
play will appear.
3) By pressing “Ensemble list” button the
number of Ensembles that have been
found during search will be displayed

i n 2 d i g i D -JV-2 S e r i e s
D i g i t a l R a d i o
Settings and Information Menu(2)
11) With use rotary button marked ―DVD En-
ter‖ the user can select any of the 6 Presets
displayed
10) Channel information can be displayed
by pressing “Channel Information”.
9) Stations can be listed in alphabetical order by
pressing “Channel List” and the user can select the
station by scrolling up and down the page and se-
lecting the station of their choice