Indesit Aqualtis 2008 User manual

WASHING
Service Quick Guide
Service Quick Guide
Indesit Company, Service Department
In Digit interface appliances Demo
Mode is selected by pressing the
following buttons simultaneously:
“Power On” + “Start/Pause” + “Last
function on right”
To deactivate press the following buttons simultaneously:
“Power On” + “Start/Pause”
SQG_WM_31_GB
1/2
Aqualtis 2008 Digit Interface washing machine
Arcadia washing machine: “AQ.F...”
Models Covered:
Demo Mode:
Interface:
1457
Function Buttons
1 ON/OFF button and LED
2 PROGRAM knob
3 DIGIT displays
4 ECO LED
5 START/PAUSE button
6 WASH PHASE LEDs
7 CHILD LOCK button and LED
8 DOOR LOCK LED
9 WASH OPTION buttons
2
6
8
3
9

Lavabiancheria Aqualtis 2008 Interfaccia LCD
2/2
Appliance response in the event of a fault:
Fault messages:
In case of a fault the appliance will fill with water and drain continuously to prevent damage to the heating
element and possible flooding.
The faults are the same as those of the Arcadia platform (see file “ Arcadia Platform Fault Table”) .
The fault is shown on the central Digit display while the program progress LEDs flash.
Fault Table reference:
See SQG WM24 (Full) / SQG WM23 (Basic)
Autotest function:
Start with the appliance off and the program knob set to the top position (at 12 o’clock).
1. Switch on the appliance and turn the knob clockwise by one position. Switch off the appliance and
turn the knob to the original position
2. Switch on the appliance and turn the knob clockwise by two positions. Switch off the appliance and
turn the knob to the original position
3. Switch on the appliance and turn the program knob counter-clockwise by one position then press the
Start button.