Indigo Lime Emerald T stand User manual

Emerald T stand Page 1
Emerald T one Page 1 & 2
Emerald T plus Page 1 & 2
Emerald X Page 2
EM1
4N-EM1- *
4P-EM1- **
4X-EM1- *
Edition GB 11/04/2017. Support Grip patent pending
Emerald X
Extends
Emerald T one
into
Emerald T plus
Emerald T one
Stand + one frame
positioned left or right.
It’s up to you
Emerald T plus
Stand + 2 frames
Emerald T stand
Stand only
Instructions

Emerald T Stand –Installation
12
X2
X2
3
4If you have a frame or
2, continue this
installation.
If not, then you are
done installing the
Emerald T Stand.
Enjoy.

Emerald T one / plus / X –Installation
1a 1b
2
If you have another
frame, continue this
installation.
If not, install the
Support Grips using
their instruction
guide.
3
Emerald T plus / X –Continued
1 2
3Install Support Grips using their instruction guide

Safety Warnings
Plastic bags and small components must be kept away from
children.
Stability
With so many combinations of device, bracket and wiring
being possible it is not feasible to give specific positioning
guidance for each device.
The customer must ensure the complete TV/device installation
is stable on the stand.
In general devices are normally best positioned by placing their
ends on the Supports but it is important for customers to
ensure adequate access for installation and use and that the
device is stable. So there should be room for wiring devices
during installation and space for normal use such as inserting
discs in games consoles.
End of use and Re-cycling:-
Packaging; all bags are polyethylene and recyclable, adhesive
tape should be disposed in waste.
We have designed our brackets to extend their
life by making the Support Grips adjustable and
re-useable however if you do wish to dispose of
them please note:-
All metal components are steel and recyclable.
The buffers on the Support Grips are rubber and recyclable