Infinite NavePoint 00301598 User manual

NavePoint.com
2021 Infinite Electronics, Inc. Navepoint Is a registered tradmark of Infinite Electronics, Inc.
OWNER’S MANUAL:
Desktop Open Frame 2 Post Rack
10-32Threaded Frame 2 Post Rack
(00301598, 00301601, 00301605)

Owner’s Manual |Desktop Open Frame 2 Post Rack 10-32Threaded Frame 2 Post Rack
2NavePoint.com
THIS MANUAL APPLIES TO THE FOLLOWING SKUs: 00301598, 00301601,00301605
Keep this information for further reference.
Thank you for purchasing a NavePoint product. If you have any questions regarding the installation or use of your
product, please call us at 888.505.1363.
Please examine the product for any damaged parts. If any part is damaged or missing, contact NavePoint for
assistance. Do not attempt to install or use product if it has been damaged.
During installation, lay product contents on cardboard or other protective surface to avoid any damage.
Improper installation or use of this product could result in damage to the product, other equipment, or personal
injury. It is recommended that installation be performed by a qualified installer. NavePoint cannot be held
responsible for damage to equipment or personal injury resulting from improper use or installation of product. If
product is intended to store/mount equipment, please ensure the equipment stored/mounted does not exceed the
specified weight capacity.
Limitations of Liability: In no event will Infinite Electronics International, Inc. be liable for any damages, whether
direct or indirect, special, punitive, incidental or consequential damages (including, but not limited to, lost profits or
revenue, loss of use, lost business opportunities or loss of goodwill) or for the costs of procuring substitute
products, arising out of or in connection with the use of the product, whether such liability arises from any claim
based upon contract, warranty, tort (including negligence), product liability or otherwise, whether or not seller has
been advised of the possibility of such loss or damage. In no event will seller’s total cumulative liability, from all
causes of action and all theories of liability, exceed the total amounts actually paid to seller by customer under the
order that gives rise to any liability hereunder.

3NavePoint.com
1. PARTS IDENTIFICATION
Rack Components
A Front Base DLeft Base
BLeft Vertical Rail ERight Base
CRight Vertical Rail FPlastic Feet (x4)
Rack Installation Hardware
GH I
M6*12mm Screws (x10) M6 Flange Nuts (x10) M5*10mm Screws (x4)
Equipment Mounting Hardware
Tools Required: Phillips Screwdriver (not included)
10-32 Tapping Screws
9U(x12) 12U(x12)
J

Owner’s Manual |Desktop Open Frame 2 Post Rack 10-32Threaded Frame 2 Post Rack
4NavePoint.com
2. RACK ASSEMBLY
Assemble Front Base to Left and Right Base
Attach Front Base (A) to the Left Base (D) and Right Base (E) and secure them with
2 of the M6*12mm Screws (G) and 2 of the M6 Flange Nuts (H) using a Phillips Screwdriver
(not included).
Assemble Left and Right Vertical Rail
Attach Left Vertical Rail (B) and Right Vertical Rail (C) to the frame built above and secure
them with 8 of the M6*12mm Screws (G) and 8 of the M6 Flange Nuts (H) using a Phillips
Screwdriver (not included).

5NavePoint.com
Assemble Plastic feet
Attach 4 Plastic feet (F) to the frame built
above and secure them with 4 of the
M5*10mm Screws (I) using aPhillips
Screwdriver (not included).

Owner’s Manual |Desktop Open Frame 2 Post Rack 10-32Threaded Frame 2 Post Rack
6NavePoint.com
3. EQUIPMENT INSTALLATION
1 Rack Unit
Tapped Hole Mounting:
Use the included 10-32 Mounting Screws
(J) to Secure your equipment to the Left
Vertical Rail (B) and Right Vertical Rail (C)