Inland 08419 User manual

Quick setup guide for the 08419 USB 2.0 SATA enclosure
The included accessories:

Step 1.) Unpack your enclosure to ensure you have all the necessary components.
Remove cover so you can install your drive.
Step 2.) Locate the SATA connector on your hard drive.

Step 3.) Lineup your drive’s SATA connector with the SATA connector located inside
the enclosure.
Step 4.) Carefully insert the drive into the enclosure.

Step 5.) Lineup the four (4) screw holes between the enclosure and the cover.
Step 6.) Install the four (4) black screws

Step 7.) Install the four (4) silver color screws on the bottom to secure your drive to the
enclosure
Step 8.) Attach the included power adapter to an available power outlet. Attach the other
end of the power adapter to the enclosure as shown