Inovalley RETRO-05 User manual

DIGITAL TURNTABLE
AND CASSETTE PLAYER
Ref.: RETRO-05
- MANUAL -
READ THIS INSTRUCTIONS CAREFULLY BEFORE USE AND STORE
IN A SAFE PLACE FOR FUTURE REFERENCE

BEFORE USE,,,,, ,, ,,,,,,,,,
READ THIS BEFORE OPERATION
● Keep the instructions for future use.
● Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or
close to a source of heat. Also avoid locations subject to vibrations and excessive dust,
heat, cold or moisture.
● Make sure has no liquid is spilled on device and device openings.
● The ventilation holes should not be covered. Make sure there is enough space above and
beside the amplifier/receiver (about 4 hours). Do not place a CD player or other
equipment on top of the Turntable Player/Recorder/
● Do not open the cabinet as this might result in damage to the circuitry or electrical shock.
If a foreign object gets into the set. Contact you dealer.
● Move device carefully, avoid shocks.
● When removing the power plug, never yank the cord.
● If the replacement of decision-making is required, please you send has an experienced or
the device manufacturer technician.
● The sector cord should be unplugged a long period of use.
● For cleaning the device, please follow the recommendations of the notice.
● Do not attempt to clean the unit with the chemical solvents as this might damage the finish.
Use a clean, dry cloth.
● Device shall be repaired by a qualified person when:
a. the taken or the power cord is damaged,
b. objects have fallen a I ' interior camera or a liquid was reverses a I ' internal device,
c. device was exposes to the rain,
d. device does not work correctly without notable exterior change,
e. device fell and the subwoofer is broken.
● The user shall not try to maintain device beyond that which is described in this information
form. The guarantee would negate.
● Keep this manual in a safe place for future reference.

INSTALLATION AND OPERATION
CAUTION: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being installed, moved or cleaned.
THE TURNTABLE FEATURES
1. 3-speed turntable fit for 33, 45, 78 RPM
2. Belt-drive and semi-automatic play tone arm
4. Ceramic stereo cartridge with jewel stylus
5. Built-in 45 rpm adapter
6. USB 2.0 port
7. SD/MMC port for encoding & decoding
8. Analog AM/FM/FM stereo radio
9. Cassette tape playback
10. Aux in and headphone sockets
11. Full range stereo speakers
12. Removable semi transparent plastic dust cover

LOCATIONOFCONTROLS
1. Transparent dust cover
2. 45rpm adapter
3. Tone arm set
4. Full range dynamic
stereo speakers
5. Play/pause lift lever
6. Auto/manual stop switch
7. Speed switch
8. Power/Volume knob
9. Tuner knob
10. USB socket
11. USB/MMC socket
12. Function switch
13. Tuner BAND switch
14. Headphone jack
15. Aux in jack
16. REC key
17. SOURCE key
18. DELETE key
19. FORLDER+ key
20. PLAY/PAUSE key
21. STOP key
22. PREV key
23. NEXT key
24. Diamond cartridge
25. The big platter
26. Tape slot
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
CONNECTION
1. Connect the power cord to AC outlet 240V/50Hz.
2. Switch the function selector to PHONO/USB&SD/TUNER/TAPE function. Now your
system is ready to play the music.

AM/FM OPERATION ,,,,,,,, ,,
1. Set FUNCTION switch to TUNER mode, then choose needed band (AM, FM and FM
stereo) by BAND switch.
2. Search stations: Rotate the TUNER knob to choose request station, or press
PREV/NEXT keys to choose idea stations. User can also press one of the two keys a
little longer around 1.5s then the model will search automatically and it would stop at a
clearest station.
PHONO OPERATION
1. Press the Function switch to PHONO position. Then put a
record on the Platter lightly. In certain circumstances, 45
RPM adapter is needed;
2. Select the speed of record: 33 1/3, 45, 78rpm according to
vinyl to played.
3. Remove the stylus guard and push the lift lever upward to
raise the tone arm from the arm park, and then move the cartridge holder over the
record gently, now the platter will run automatically (default set of Auto/Manual stop
switch at ON position ). Then put down the lever, the tone arm would drop and touch
record surface gently. Now users can enjoy their favorite sons.
4. Select the auto/manual stop control: The turntable will stop automatically while the
song on the record finished when the switch at ON position. The other side it will
always play when it is at OFF position, this may helps to play some long recorded vinyl
which can not be played to the end by normal way.
5. Rotate the volume control knob to get desired sound level.
6. Push the arm lift lever up to raise the arm, now platter will still running but play will
pause. To continue the play, user just need to put down the lever.
7. Record vinyl: Firstly insert memory device (USB drive mp3 player or SD /MMC card).
When turntable is working, press the REC key on front control board of the unit, then
press SOURCE key to choose USB or CARD mode, later press REC key again now
recording works will begin. To finish the work just need to press the STOP key.
Note: Recorded file in mp3 format with 128bit.
CASSETTETAPEOPERATION
1. Press the Function switch to TAPE position first.
2. Insert a pre-recorded cassette tape into tape slot, with the exposed side facing right.
By pushing, the cassette will slide into the tape mechanism and play start automatically.
Note: one end of tape will remain visible.
3. Adjust volume control to your desired sound level.
4. Depress the eject button completely in, the tape will be ejected from the slot.
5. Press the eject button half way to fast forward of the tape you are listening.
6. The tape will stop automatically when it comes to its end.

USB/SD/MMC RECORDING AND PLAYING
PLAYING THE MUSIC FROM USB/SD/MMC DIRECTLY:
1. Be sure power is on, insert USB drive or Mp3 player into USB port and/or insert
MEMORY CARD (SD/MMC) into SD socket.
2. Set FUNCTION switch to USB/SD position, press SOURCE key to choose music
source USB or SD.
3. The device supports for Mp3 and WMA formats. During play status, press
PLAY/PAUSE button once to halt playing, press it again to continue.
4. Press PREV once to play the preview song, hold down continuously to speed up
selecting backward. Press NEXT once to play next one, holds down continuously to
speed up selecting forward.
5. Press FOLDER+ key, the unit will search music files from first folder to the last one on
memory devices, then press continually to recycle overview all folders.
6. Press STOP to end up the play.
RECORD OPERATION:
1. Select Audio source: PHONO/TAPE or External audio source through AUX IN jack
and play it on.
2. Insert USB drive and/or memory card.
3. Now press REC key and press SOURCE to choose memory type USB or SD. Then
press REC once again, it will start working now.
4. Press STOP key to end up the work.
Note: The device also support for transit music files between SD and USB. Steps are
similar to above operation. The device supports for Mp3 and WMA formats playback.
PHONES OUTPUT/EARPHONE JACK
1. The turntable can be connected to amplifier or speakers by 3.5mm
HEADPHONE jack.
2. Private listen of earphone also can be realized through this jack.

AUX IN JACK
1. The external sound sourcing can be played and recorded through the
device.
2. The external sound sourcing can be recorded to the U stick or SD through
the sockets.
Note: to enjoy the function, user need to select the function switch to TAPE position, and
Aux In source will be prior to tape play.
G REPLACING STYLUS
- Refer to the figures 1-8
TIPSFORBETTERPERFORMANCE
1. When opening or closing the turntable cover, handle it gently, moving it either at the
center or equally from both sides.
2. Do not touch the stylus tip with your fingers; avoid bumping the stylus on the turntable
mat or a record’s edge
3. Clean the stylus tip frequently, using a soft brush with a back-to-front motion only.
4. If you use a stylus cleaning fluid, use it very sparingly.
5. Wipe the dust cover and turntable housing gently with a soft cloth. Use only a small
amount of mild detergent solution to clean the turntable and dust cover.
6. Never apply harsh chemicals or solvents to any part of the turntable system.
7. Prior to moving the turntable, always unplug it from the AC outlet and fasten the tone
arm on the tone arm rest with the vinyl twist-tie.

,,,,,,,,,, MAINTENANCE AND CARE,, ,,,,
Caring for the player
● Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such
as
vases, shall be placed on the apparatus.
● The maximum ambient temperature: 35°C
● Electronic products of this kind should never be subjected to extreme temperatures or high
humidity. For instance, this set should not be placed in bathing areas of around stoves and
radiators.
● If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel
before operating it any further.
Cleaning the unit
● To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
● The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use
caution when cleaning and wiping the plastic parts.
● Mild soap and a damp cloth may be used on the front panel.
Inclination
● Do not install the unit in a inclined position, It is designed to be operated in a horizontal position
only.
Condensation
● If the unit is brought directly from a cold to a warm location, moisture may condense inside the
player, and cause damage it. When you first install the unit, or when you move it from a cold to a
warm location, wait for 30 minutes before operating the unit.
Disconnect power
● If you are not going to use the player for long time, be sure do disconnect the player from the
AC
power source.