2.3. Tracking parameters
Some tracking parameters can be tuned remotely to match specific use-cases. Please reach us
at
[email protected] if you wish to alter the default configuration of the device.
Available parameters
●Period of time between two location reports when the tracker is moving:
○Default value: 10 minutes
○Range:
■Minimal value: 2 minutes
■Maximal value: 24 hours
●Period of time between two location reports when the tracker is standing still:
○Default value: 4 hours
○Range:
■Minimal value 2 minutes
■Maximal value 24 hours
●Sensitivity to shocks and vibrations:
○Default value: Medium sensitivity
○Scale:
■Low sensitivity: alerts are sent only when intense shocks are detected.
■Medium sensitivity: alerts are sent when heavy vibrations are detected.
■High sensitivity: alerts are sent when low vibrations are detected.
On-site maintenance
Firmware updates can be performed on-site when maintenance operations are required. Please
Supply Chain Tracker 2 - User Guide (ver. 1.0) 10/12
