Itzumi 23X Block Camera User manual

23X
23X
23X
23X Block
Block
Block
Block Camera
Camera
Camera
Camera User
User
User
User ’
’
’
’ s
s
s
s Manual
Manual
Manual
Manual
Version
Version
Version
Version 1.0
1.0
1.0
1.0

Table
Table
Table
Table of
of
of
of Contents
Contents
Contents
Contents
Welcome ............................................................................................................................................. 3
1 General Introduction ................................................................................................................... 5
1.1 Overview ........................................................................................................................ 5
1.2 Functions ........................................................................................................................ 5
1.3 Specifications ................................................................................................................ 6
2 Framework ................................................................................................................................... 8
2.1 Dimension ...................................................................................................................... 8
2.2 Port .................................................................................................................................. 9
3 Command List ........................................................................................................................... 11
Appendix Toxic or Hazardous Materials or Elements ................................................................ 14

Welcome
Thank you for purchasing our block camera!
This user ’ s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user ’ s manual well for future reference!

Important
Important
Important
Important S
S
S
S afeguard
afeguard
afeguard
afeguard s
s
s
s and
and
and
and W
W
W
W arnings
arnings
arnings
arnings
1
1
1
1．
．
．
．Electrical
Electrical
Electrical
Electrical safety
safety
safety
safety
All installation and operation here should conform to your local electrical safety codes.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
2
2
2
2．
．
．
．Transportation
Transportation
Transportation
Transportation security
security
security
security
H eavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3
3
3
3．
．
．
．Installation
Installation
Installation
Installation
Do not apply power to the device before completing installation.
Always follow the instruction guide the manufacturer recommended.
4
4
4
4．
．
．
．Qualified
Qualified
Qualified
Qualified engineers
engineers
engineers
engineers needed
needed
needed
needed
All the examination and repair work should be done by the qualified service engineers.
We are no t liable for any problems caused by unauthorized modifications or attempted repair.
5
5
5
5．
．
．
．Environment
Environment
Environment
Environment
This series product should be installed in a cool, dry place away from direct sunlight or strong light ,
inflammable, explosive substances and etc.
The working temperature ranges from -10 ℃~ to + 60 ℃. Please keep it away from the electromagnetic
radiation object and environment.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the integrated camera module.
6.
6.
6.
6. Daily
Daily
Daily
Daily Maintenance
Maintenance
Maintenance
Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
Use the dry soft cloth to clean the device.
I f there is too much dust, please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.

5
1
1
1
1 General
General
General
General Introduction
Introduction
Introduction
Introduction
1.1
1.1
1.1
1.1 Overview
Overview
Overview
Overview
This series block camera adopts the high-performance 1/4-inch SONY CCD. It supports 23X
optical zoom. The 540TVL definition guarantees the clear video. The high performance DSP can
make the focus fast and accurate. At the same time , the auto aperture makes it suitable for
various illumination environments. The auto white balance function can restore the true color.
The auto electronic gain function can guarantee the self-adaptive color.
This product has the advanced design and is easy to install.
1.2
1.2
1.2
1.2 Functions
Functions
Functions
Functions
Mirror
Mirror
Mirror
Mirror
It includes the pan-flip and tilt -flip (e-flip). The pan -flip means turn the camera output video
horizontally and the tilt -flip means turn the camera output video vertically.
Still
Still
Still
Still image
image
image
image
It is to freeze current frame of the camera. You can allow the camera to output the specified
frame for a period of time when you are doing other operations such as move, tilt, zoom, focus,
lens initialization or preset. The camera can resume output normally after you completed the
operation .
Auto
Auto
Auto
Auto exposure
exposure
exposure
exposure
The device can automatically set the shutter speed and aperture value according to the video
exposure value.
Negative
Negative
Negative
Negative image
image
image
image
This series product can output the negative image. The negative image color is contrary to or is
compensate for the actual image.
Monochrome
Monochrome
Monochrome
Monochrome color
color
color
color display
display
display
display
The device can output the m onochrome color video when system boots up.
Auto
Auto
Auto
Auto white
white
white
white balance
balance
balance
balance
The white balance refers to the camera to restore the white object color. It allows the camera to
adjust the color temperature in indoor and outdoor environment , just like our human eyes does.
BLC
BLC
BLC
BLC (Backlight
(Backlight
(Backlight
(Backlight compensation)
compensation)
compensation)
compensation)
Once there is strong light at the back of the object, the main object video may become dark.
Backlight compensation technology is to automatically compensate the light to get vivid video.
You can refer to the following two figures to see the result of the backlight compensation
technology function.
Exposure
Exposure
Exposure
Exposure compensation
compensation
compensation
compensation mode
mode
mode
mode

6
In the auto exposure mode, you can use this function to adjust the exposure object value.
Focus
Focus
Focus
Focus function
function
function
function
This series product supports auto focus, manual focus and one-time auto focus zoom.
Zoom
Zoom
Zoom
Zoom
It supports 23X optical zoom.
Auto
Auto
Auto
Auto day/night
day/night
day/night
day/night mode
mode
mode
mode switch
switch
switch
switch (
(
(
( Color
Color
Color
Color and
and
and
and black/
black/
black/
black/ white
white
white
white switch
switch
switch
switch )
)
)
)
This function allows the camera to display the color video in the daytime while the black and
white video at night. It is to enhance camera sensitivity and definition.
ICR
ICR
ICR
ICR day/night
day/night
day/night
day/night switch
switch
switch
switch
It is for the IR camera. The IR cut removal is to filter the IR light in the daytime and then auto
switch to the general fitter at night. This function allows the camera to output the high sensitivity
and clear video.
OSD
OSD
OSD
OSD
T he camera supports user-friendly on screen display menu suitable for various users to select
the different functions .
1.3
1.3
1.3
1.3 Specifications
Specifications
Specifications
Specifications
Please refer to the following sheet for specification.
Item Specification
CCD
Size 1/4-inch SONY CCD
Effective Pixel
PAL ：752 （H）*582 （V）
NTSC ：768 (H) ×494 (V)
Optical
Optical Zoom 2 3 X ，f=3.9 ～89.7mm （F1.6 ～3.7 ）
Min Focus
Distance
100mm ～1000mm （Near ～Far ）
Range
Pan ：50.66 ° （Near ）to 2.46 ° （Far ）
Tilt ：61.68 ° （Near ）to 3.06 ° （Far ）
Diagonal ：38.54 ° （Near ）to 1.84 ° （Far ）
Synchronization
Scan System 2 ：1 interlace
Synchronization INT
Frequency
PAL: Pan ：15.625KHz ，Tilt ：50.00Hz
NTSC ：Pan :15.750KHz ；Tilt ：60.00Hz
Resolution Color ：540 TVL
Video Output CVBS ：1.0Vp-p ／75 Ohm
SNR ≥ 50dB （AGC Off ，Weight ON ）

7
Item Specification
Min . Illumination
Color ：0.1Lux/F1.6
Black and white: 0.01Lux/F1.6
BLC On/Off
Day/Night Switch
Auto switch color video to black and white video
( ICR d ay/night mode switch)
Auto Gain On/Off
White Balance
Support auto balance ( 3000 to 7500K )), auto trace
white balance ( 2700 to 9500K ) and manual white
balance.
Electronic Shutter
PAL: Auto: 1/50 ～1/100 , 00s , Manual 1/50 ～1/10 ，000
s
NTSC: Auto: 1/ 6 0 ～1/100 , 00s , Manual 1/60 ～1/10 ，
000s
Image Flip Support
Image Freezing Support
External Control
RS232 ，9600bps , compatible with SONY VISCA
protocol.
Focus Auto ／manual ／one-time auto focus
Focus speed 3.5s ，from Near to the Far
Lens Initialization Built-in
Exposure Compensation Support
Gain Setup Support
Aperture Control Support auto/manual aperture control.
Focus Control Support auto/manual focus control.
OSD Support on screen display(OSD)
Working Environment – 10 ° C ～﹢ 60 ° C/20 ﹪～ 80 ﹪RH
Storage Environment – 20 ° C ～﹢ 70 ° C/20 ﹪～ 95 ﹪RH
Power DC 9V ～12V （Recommended : 12V ）
Power Consumption Static ：2.8W ，Dynamic ：3.3W
Weight 23 0g
Dimension （W*H*D ）87.1 （mm ）*62.1 （mm ）*52.7 （mm ）

8
2
2
2
2 Framework
Framework
Framework
Framework
2.1
2.1
2.1
2.1 Dimension
Dimension
Dimension
Dimension
You can refer to the following three figures for dimension information. See Figure 2 1 and
Figure 2 2 . The unit is mm.
Figure 2 1
Figure 2 2

9
2.2
2.2
2.2
2.2 Port
Port
Port
Port
You can refer to the following figure for port connection information See Figure 2 3 .
Figure 2 3
Please refer to the following sheet for detailed information.
Port Function Note
Zoom
Zoom out Decrease the zoom value.
Zoom in Increase the zoom value.
30-pin port
Debug port It is the debug port. You can connect to the debug
board during the production debug process.
Zoom inZoom out9-pin
Control port
30-pin debug port
Communication COM
通信串口
Pin 1 Pin 9

10
9-pin user
port
User port It includes the function ports such as video output,
power input.
Indication
light
Working status
indication light
It is red. When the device is working properly, the
red light becomes flashing.
Power status
indication light
It is red. When the power supply is normal, the red
light becomes flashing.
Note
Note
Note
Note
You can connect the debug board to the 30-pin debug port to debug. Please note the debug
board is not our default accessory. You can contact your local retailer to get the board.
Please refer to the following sheet for 9-pin user connection pin information.
No Pin Name Note
1 GND
2 VD_LOCK Reserved development port
3 GND_DAC Video GND end
4 VIDEO_OUT Video output end
5 GND
6 DC_IN +9 ～+12V power input port
7 GND
8 UTXD1 URT COM input signal ，TTL level
9 URXD1 URT COM output signal ，TTL level

11
3
3
3
3 Command
Command
Command
Command List
List
List
List
Command List Command Value Note
CAM_Zoom Stop 8x 01 04 07 00 FF
Tele(Standard) 8x 01 04 07 02 FF
Wide(Standard) 8x 01 04 07 03 FF
Direct 8x 01 04 47 0p 0q 0r 0s FF pqrs ：Zoom Position
CAM_Focus Stop 8x 01 04 08 00 FF
Far(Standard) 8x 01 04 08 02 FF
Near(Standard) 8x 01 04 08 03 FF
Direct 8x 01 04 48 0p 0q 0r 0s FF pqrs ：Focus Position
Auto Focus 8x 01 04 38 02 FF
AF ON/OFFManual Focus 8x 01 04 38 03 FF
Auto/Manual 8x 01 04 38 10 FF
One Push Trigger 8x 01 04 18 01 FF One Push AF Trigger
CAM_Initialize Lens 8x 01 04 19 01 FF Lens Initialization Start
CAM_WB Auto 8x 01 04 35 00 FF Normal Auto
Indoor 8x 01 04 35 01 FF Indoor mode
Outdoor 8x 01 04 35 02 FF Outdoor mode
One Push WB 8x 01 04 35 03 FF One Push WB mode
ATW 8x 01 04 35 04 FF Auto Tracing White Balance
Manual 8x 01 04 35 05 FF Manual Control mode
One Push Trigger 8x 01 04 10 05 FF One Push WB Trigger
CAM_RGain Reset 8x 01 04 03 00 FF
Manual Control of R GainUp 8x 01 04 04 02 FF
Down 8x 01 04 04 03 FF
Direct 8x 01 04 44 00 00 0p 0q FF pq ：B Gain
CAM_AE Full Auto 8x 01 04 39 00 FF Automatic Exposure mode
Manual 8x 01 04 39 03 FF Manual Control mode
Shutter Priority 8x 01 04 39 0A FF
Shutter Priority Automatic
Exposure mode
Iris Priority 8x 01 04 39 0B FF
Iris Priority Automatic Exposure
mode
Bright 8x 01 04 39 0D FF Bright Mode(Manual control)
CAM_Shutter Reset 8x 01 04 0A 00 FF Shutter Setting

12
Up 8x 01 04 0A 02 FF
Down 8x 01 04 0A 03 FF
Direct
8x 01 04 4A 00 00 0p 0q
FF
pq ：Shutter Position
CAM_Iris Reset 8x 01 04 0B 00 FF
Iris SettingUp 8x 01 04 0B 02 FF
Down 8x 01 04 0B 03 FF
Direct
8x 01 04 4B 00 00 0p 0q
FF
pq ：Iris Position
CAM_Gain Reset 8x 01 04 0C 00 FF
Gain SettingUp 8x 01 04 0C 02 FF
Down 8x 01 04 0C 03 FF
Direct
8x 01 04 4C 00 00 0p 0q
FF
pq ：Gain Position
CAM_Bright Reset 8x 01 04 0D 00 FF
Bright SettingUp 8x 01 04 0D 02 FF
Down 8x 01 04 0D 03 FF
Direct
8x 01 04 4D 00 00 0p 0q
FF
pq ：Bright Position
CAM_ExpComp On 8x 01 04 3E 02 FF
Exposure Compensation
ON/OFFOff 8x 01 04 3E 03 FF
Reset 8x 01 04 0E 00 FF
Exposure Compensation
Amount SettingUp 8x 01 04 0E 02 FF
Down 8x 01 04 0E 03 FF
Direct
8x 01 04 4E 00 00 0p 0q
FF
pq ：ExpComp Position
CAM_Backlight On 8x 01 04 33 02 FF
Back Light Compensation
ON/OFFOff 8x 01 04 33 03 FF
CAM_Aperture Reset 8x 01 04 02 00 FF
Apeture Contro;Up 8x 01 04 02 02 FF
Down 8x 01 04 02 03 FF
Direct 8x 01 04 42 00 00 0p 0q FF pq ：Aperture Gain
CAM_LR_Reverse On 8x 01 04 52 03 FF
Mirror Image ON/OFF
Off 8x 01 04 61 02 FF
CAM_Freeze On 8x 01 04 62 02 FF
Still Image ON/OFF
Off 8x 01 04 62 03 FF

13
CAM_PictureEffect Off 8x 01 04 63 00 FF
Picture Effect SettingNeg.Art 8x 01 04 63 02 FF
B&W 8x 01 04 63 04 FF
CAM_PictureFlip On 8x 01 04 66 02 FF
Picture flip ON/OFF
Off 8x 01 04 66 03 FF
CAM_ICR On 8x 01 04 01 02 FF
Infrared Mode ON/OFF
Off 8x 01 04 01 03 FF
CAM_AutoICR On 8x 01 04 51 02 FF
Auto dark-field mode On/Off
Off 8x 01 04 51 03 FF
Threshold 8x 01 04 21 00 00 0p 0q FF
Pq:ICR ON → OFF threshold
level
CAM_Memory Reset 8x 01 04 3F 00 0p FF
p：Memory Number （=0 to 5 ）Set 8x 01 04 3F 01 0p FF
Recall 8x 01 04 3F 02 0p FF
CAM_Custom Reset 8x 01 04 3F 00 7F FF
Starts in this mode at Power ONSet 8x 01 04 3F 01 7F FF
Recall 8x 01 04 3F 02 7F FF
CAM_Memsavr
Write
8x 01 04 23 0X 0p 0p 0q 0q
FF
X：00 to 07 （Address ）Total
16 Byte
ppqq ：0x0000 to 0XFFFF
（Data ）
CAM_Display
On
8x 01 04 15 02 FF
（8x 01 06 06 02 FF ）
Display ON/OFF
Off
8x 01 04 15 03 FF
(8x 01 06 06 03 FF)
On/Off
8x 01 04 15 10 FF
(8x 01 06 06 10 FF)
CAM_Title Off 8x 01 04 74 3p FF
CAM_IDWrite
8x 01 04 22 0p 0q 0r 0s FF
pqrs ：Camera ID （=0000 to
FFFF ）
•
•
•
•This
This
This
This manual
manual
manual
manual is
is
is
is for
for
for
for reference
reference
reference
reference only.
only.
only.
only. Slight
Slight
Slight
Slight difference
difference
difference
difference may
may
may
may be
be
be
be found
found
found
found in
in
in
in the
the
the
the user
user
user
user
interface.
interface.
interface.
interface.
•
•
•
•All
All
All
All the
the
the
the designs
designs
designs
designs and
and
and
and software
software
software
software here
here
here
here are
are
are
are subject
subject
subject
subject to
to
to
to change
change
change
change without
without
without
without prior
prior
prior
prior written
written
written
written
notice.
notice.
notice.
notice.
•
•
•
•If
If
If
If there
there
there
there is
is
is
is any
any
any
any uncertainty
uncertainty
uncertainty
uncertainty or
or
or
or controversy
controversy
controversy
controversy ,
,
,
, please
please
please
please refer
refer
refer
refer to
to
to
to the
the
the
the final
final
final
final explanation
explanation
explanation
explanation of
of
of
of us.
us.
us.
us.
•
•
•
•Please
Please
Please
Please visit
visit
visit
visit our
our
our
our website
website
website
website or
or
or
or contact
contact
contact
contact your
your
your
your local
local
local
local service
service
service
service engineer
engineer
engineer
engineer for
for
for
for more
more
more
more
informati
informati
informati
informati on.
on.
on.
on.

14
Appendix
Appendix
Appendix
Appendix Toxic
Toxic
Toxic
Toxic or
or
or
or Hazardous
Hazardous
Hazardous
Hazardous Materials
Materials
Materials
Materials or
or
or
or Elements
Elements
Elements
Elements
Component
Component
Component
Component
Name
Name
Name
Name
Toxic
Toxic
Toxic
Toxic or
or
or
or Hazardous
Hazardous
Hazardous
Hazardous Materials
Materials
Materials
Materials or
or
or
or Elements
Elements
Elements
Elements
Pb
Pb
Pb
Pb Hg
Hg
Hg
Hg Cd
Cd
Cd
Cd Cr
Cr
Cr
Cr VI
VI
VI
VI PBB
PBB
PBB
PBB PBDE
PBDE
PBDE
PBDE
Circuit Board
Component
○○○○○○
Device
Construction
Material
○○○○○○
Wire and Cable ○ ○ ○ ○ ○ ○
Pack ing
Components
○○○○○○
Accessories ○ ○ ○ ○ ○ ○
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in
the parts is below the relevant threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all
homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006
standard. During the environmental-friendly use period (EFUP) period, the toxic or hazardous
substance or elements contained in products will not leak or mutate so that the use of these
(substances or elements ) will not result in any severe environmental pollution , any bodily injury or
damage to any assets. The consumer is not authorized to process such kind of substances or
elements , please return to the corresponding local authorities to process according to your local
government statutes