J.Burrows JBPSMARMWE User manual

PROFESSIONAL SINGLE MONITOR ARM
1/15
JBPSMARMWE
JBPSMARMBK
1 Carton
For spare parts or hardware call 1300 OFFICE

2/15
Officeworks Ltd. 236-262 East Boundary Road Bentleigh East VIC 3165 AUSTRALIA
Customer Service Contact Details
General Advice
Spare Parts & Hardware
1300 OFFICE
People Required

3/15
CHILDREN MUST BE SUPERVISED.
NOTE
CAUTION
WARNING
DANGER
Tools Required
CAUTION: Do not use tools other than those required, as this
can damage your new item.
Please check you have all hardware before assembling.
If you are missing any hardware, please contact the store of purchase.
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
Do not tighten screws before all screws are in the right place.
Do not use this product unless all bolts, screws and knobs are firmly secured.
Check that all bolts, screws and knobs are securely tightened at least every 4 months.
If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
Failure to follow these warnings could result in serious injury.

4/15
1
1pc
2
1pc
34
1pc 1pc
5
1pc
7
1pc
1pc
1pc
1pc
8
910
6
1pc M8*120mm 1pc M8*65mm
Parts List

5/15
CD
3pcs M6*12mm screw 8pcs Ø6.5*Ø13*2 washer
E F
1pc M6 Box wrench 1pc 4X4 Allen key
G
1pc 5x5 Allen key
A
4pcs M4*12mm screw
B
4pcs M5*12mm screw
Included Hardware

6/15
Installation Diagram
1
2
5
4
3
1
3
7
6
8
9
10
Option A: Clamp version, go to step 1 Option B: Grommet version, go to step 4
Choose proper grommet screw based on thickness of desk:
M8*65mm for desk thickness: < 18mm
M8*120mm for desk thickness: 18-100mm
6

7/15
F
1pc 4X4 Allen key
C
3pcs M6*12mm screw
1
3
2
C
C
C
Assembly
Step 1
Option A: Clamp

8/15
3
4
Quick sliding
adjustment
Step 2
Step 3
Select position according to
thickness of the desk
For desk thickness:
20-100mm
DESK
Tighten

9/15
1
7
6
C
F
1pc 4X4 Allen key
C
3pcs M6*12mm screw
3
X
6
1pc M8*120mm 1pc M8*65mm
Choose proper grommet screw(6)
based on thickness of desk:
M8*65mm for desk thickness: < 18mm
M8*120mm for desk thickness: 18-100mm
Option B: Grommet
Step 4
Step 5

10 /15
100
75
100
75
1 0
9
8
Compatible with the monitor hole distance
75x75 or 100x100
VESA ON MONITOR
75x75 or
100x100
Step 6
Step 7
Available hole size:
8.5-25mm
Tighten
DESK

11 /15
G
1pc 5x5 Allen key
D
8pcs Ø6.5*Ø13*2 washer
A
4pcs M4*12mm screw
B
4pcs M5*12mm screw
Attaching the monitor to the plate
3
21
G
Step 8
Use washer
if needed (D)
5x5
Allen Wrench
A or B
A or B
A or B
D
D

12 /15
Adjust the monitor G
1pc 5x5 Allen key
E
1pc M6 Box wrench
Step 9a
E
2
Remove the plastic cover, use box
wrench (E) to adjust the tilt function
on position 2
Use Allen Key (G) to adjust the
swivel function on position 1
G
11

G
GG
13 /15
Adjust the monitor G
1pc 5x5 Allen key
Step 9b
Monitor must be on the arm
Arm must be in mount
CAUTION
-
+
If the monitor is lighter than 4-5 kg, the arm drifts upward.
Insert Allen Key (G), turn the tension screw clockwise (-).
If the monitor is heavier than 4-5 kg, the arm drifts
downwards.
Insert Allen Key (G), turn the adjustment screw
counter-clockwise (+).
Adjusting arm to monitor weight
Weight tension is pre-set at 4-5 kg.
If the monitor weighs more or less than that,
press the arm down to a position parallel
with the desk prior to adjusting the weight.

14 /15
Step 10
5
Using cord management
Cable

15 /15
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
CAUTION: This product is intended to hold the maximum weight indicated.
Exceeding the maximum weight will result in instability and may cause injury.
10"~30"
75x75
100x100 2-9kg
-85
15