Sanus SAN213 User manual

Sanus Systems
2221 Hwy 36 West
Saint Paul, MN 55113 USA
Customer Service
Americas: 800-359-5520 • 651-484-7988 • [email protected]om
Europe, Middle East, and Africa: + 31 40 2324700 • eur[email protected]om
Asia Pacific: 86 755 8996 9226 • [e-mail]
accents.sanus.com
©2010 Milestone AV Technologies, a Duchossois Group Company.
All rights reserved. Accents is a Milestone brand.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
(6904-002011<01>)
SAN213
Wood
Solid or Block
Concrete
5.5mm
(7/32 in.)
10mm
(3/8 in.)
13mm
(1/2 in.)

6904-002011<01>2
OPT
Wood stud walls Solid Concrete and Concrete
Block Mounting Choose an Option Do Not
WARNING: This product
contains small items that could
be a choking hazard.
Tools required Caution / Warning Heavy! Assistance Required. Unlock/Lock This End Up

6904-002011<01> 3
169.3 mm
6.67 in.
143.5 mm
5.65 in.
318.3 mm
12.53 in.
64.3 mm
2.53 in.
100 mm
3.94 in.
75 mm
2.95 in.
200 mm
7.87 in.
230 mm
9.06 in.
59.2 mm
2.33 in.
100 mm
3.94 in.
75 mm
2.95 in.
241 mm
9.49 in.
256.1 mm
10.08 in.
360º
180°
15°
15°

6904-002011<01>4
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT
Specications
Weight capacity-DO NOT EXCEED: 20.5 kg (45 lbs) includes TV and any accessories
CAUTION: Avoid potential personal injuries and property damage!
Do not use this product for any purpose not explicitly specied by manufacturer.
The wall must be capable of supporting ve times the weight of the monitor and mount combined.
This product is not designed for use in metal stud walls!
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact manufacturer
Customer Service or call a qualied contractor.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
CAUTION:
Supplied Parts and Hardware.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer
Service. Never use damaged parts!
NOTE: Not all hardware included will be used.

6904-002011<01> 5
[11] x 4
[06] x 1
[01] x 1
[18] x 1
[07] x 1
[17] x 4
[03] x 2 [04] x 2 [05] x 1
[08] x 1 [09] x 1 [10] x 2
[12] x 4 [13] x 4 [14] x 2 [15] x 4 [16] x 4
1/4-20 x 3 ¼in.5/16 x 2 ½ in.
1/4-20 in. 0.5 in. 0.5 in.
M4 x 30mm M4 8-32 x 0.5 in.
M4 x 12mm
[02] x 1
5/32 in.

6904-002011<01>6
1-1
1-2
For TVs with a at/unobstructed back. Ensure that
the bracket is level on the back of the TV. Standard
congurations are shown. If you need extra space
to accommodate cables, recesses, or protrusions,
see installation option 1-2 that uses spacers. For
special applications, or if you are uncertain about your
hardware selection, contact Customer Service.
For TVs with an irregular/obstructed back. Ensure that
the bracket is level on the back of the TV. Standard
congurations are shown. For special applications, or
if you are uncertain about your hardware selection,
contact Customer Service.
OPT
OPT
[02]
[02]
[11]
[12]
[13]

6904-002011<01> 7

6904-002011<01>8
2
CAUTION:
Wall Mounting
2-1: Wood Stud Mounting
CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
Pilot holes MUST be drilled to a depth of 63.5 mm (2.5 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
DO NOT over-tighten the lag bolts [03].
Any material covering the wall must not exceed 16 mm (5/8 in.).
Minimum wood stud size: common 2 x 4 in. (nominal 1.5 x 3.5 in.)
2-2: Solid Concrete and Concrete Block Mounting
CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
Pilot holes MUST be drilled to a depth of 63.5 mm (2.5 in.), using a 10 mm (3/8 in.) diameter drill bit.
Be sure the anchors [04] seat ush with the concrete surface.
Mount wall plate directly onto the concrete surface.
Never drill into the mortar between blocks.
DO NOT over-tighten the lag bolts [03].
Minimum solid concrete thickness: 8 in.
Minimum concrete block size: 8 x 8 x 16 in.

6904-002011<01> 9
Wood Stud Wall Mounting – See Cautions in Step 2.
1. Locate stud. Verify the center of the stud with an awl or thin nail or use
an edge to edge stud nder.
2. Level the wall plate [01] and mark the hole locations.
3. Drill pilot holes as illustrated.
4. Place the wall plate against the wall. Tighten lag bolts [03] only until
they are pulled rmly against the wall plate [01].
5. Place lag bolt covers [16] over lag bolts [03].
2-1
1
13mm
(1/2 in.)
5.5mm
(7/32 in.)
2
4
5
3
< 16 mm
(5/8 in.)
[01]
[01]
[03]
[16]
63.5 mm
2.5 in.

6904-002011<01>10
10mm
(3/8 in.)
1
3
2-2
4
Solid Concrete and Concrete Block Mounting – See Cautions in Step 2.
1. Level wall plate and mark the hole locations.
2. Drill pilot holes as illustrated.
3. Insert lag bolt anchors [04].
4. Place the wall plate against the wall. Tighten lag bolts [03] only until
they are pulled rmly against the wall plate [01]..
5. Place lag bolt covers [16] over lag bolts [03].
2
13mm
(1/2 in.)
5
[01]
[01]
[16]
[03]
[04]
75 mm
3 in.