Jarv JRV-SBD1400HR User manual
Device Overview
How to wear your Elite+ HR Fitness Band?
1 2
3 4 Change the wristband
Put on the wristband with the screen facing up and the band
wrapped around your wrist. Align the METAL CLASP along
the band to find the hole that best fits your wrist size.
*Please make sure to fasten with the METAL CLASP and not
the smaller plastic clasp.
Press down on the METAL CLASP into the holes of the wristband
until you hear a click indicating that the band is securely fastened
1.
2.
User Manual
EN
Jarv Elite +HR Fitness Band and Smart Watch
For warranty information, troubleshooting or other customer service needs please visit www.jarvmobile.com
Register your product online at www.jarvmobile.com to receive a free 6 month warranty extension
Fasten your Elite +HR Fitness Band
with the metal clasp
Charge your Elite +HR Fitness Band
To charge your Elite +HR Fitness Band, place it in the charging
box at the other end of the USB cable. Close the box afterwards,
and make sure the Elite +HR Fitness Band is securely covered
and that the charging contacts are properly aligned. Plug the
USB connector to either a PC or power adapter to start charging.
Initial charging time is approximately 2 hours.
Spread open both bands with the screen facing up, and press down
the screen with your thumb until the core comes off the wristband.
Insert the core with screen facing up into the notch from below the
wristband. Button up the clasp on the side of the band with 2 holes.
Please note that the charging contact should be near the clasp.
Attach your Elite +HR Fitness Band
to your wrist
*Failure to follow the instruction above might cause damage to the device
User Manual
EN
Jarv Elite +HR Fitness Band and Smart Watch
For warranty information, troubleshooting or other customer service needs please visit www.jarvmobile.com
Register your product online at www.jarvmobile.com to receive a free 6 month warranty extension
Get started with Elite +HR Fitness Band
Download and Install i-gotU Life app
1 2
3 4
Start Using
Elite +HR Fitness Band
Set up
Elite +HR Fitness Band
Features of
Elite +HR Fitness Band
& i-gotU Life App
Please download i-gotU Life app from Google Play or the App Store
and have it installed on your smartphone.
First time setup:
Open the i-gotU Life app.
A Setup Wizard will be launched automatically.
Follow the on-screen instructions to proceed with more settings.
Set up a new device from Settings:
Open the i-gotU Life app.
Tap the app icon at the upper left corner to open function menu.
Choose Settings.
Tap Setup New Device under MORE DEVICE SETTINGS.
Follow the on-screen instructions to continue.
Note
Your personal information is used to calculate your Base Metabolic Rate
(BMR), which determines your calories burned.
1.
2.
3.
1.
2.
3.
4.
5.
1. Switch between different function modes
2. Change display information
3. Elite +HR Fitness Band modes
2. Press the button to switch mode.
3. You’ll be entering the selected mode in 3 seconds.
Daily mode: Analyzes your daily data, including steps taken
and calories burned, and displays current UV index.
Sleep mode: Tracks your sleep pattern and quality.
Sports mode: Starts a workout and displays information
including duration, steps taken, calories burned, UV-index and
distance traveled during the workout.
Nap mode: Awakes you via vibration after a short nap.
1.
2.
3.
4.
Silent Alarm
Notification
Remote Display (Android only)
Warranty
Please download i-gotU Sports app from Google Play
and have it installed on your Android smartphone.
After starting an activity on i-gotU Sports app, selected sports
data from i-gotU Life app will be displayed on Elite +HR Fitness Band.
Remote Display can be set up from: i-gotU Life App Menu
->Remote Display.
The screen can be rotated by changing the settings from: i-gotU
Life App Menu ->Settings -> MORE DEVICE SETTINGS -> Screen
Rotation
WEEE
Supported device
Any Android smartphone (v4.3 and up) with built-in 4.0 Bluetooth
connectivity; or
iPhone 4s and later models, iPad 2 and later models, and iPod Touch
(all with iOS version 7.0 and up).
A complete list of supported smartphone or mobile devices can be
found at: http://www.jarvmobile.com/support/SBD1400/devices.html
•
•
•
4. Icon description
1. Long-press the button on the Elite +HR Fitness Band
until you see 4 icons on the screen for mode selection.
Information shown on the screen will vary as you press the
button on the Elite +HR Fitness Band to toggle between screens.
Silent Alarm awakes you using gentle vibrations of the Elite +HR
Fitness Band. You can dismiss the alarm by long-pressing the button
on the Elite +HR Fitness Band. In case you miss the alarm, Elite
+HR Fitness Band will alert you again in 5 minutes. Alarms can be
set up from: i-gotU Life App Menu -> Silent Alarm.
You will be notified with incoming calls, SMS, E-Mail, or alerts
from the social apps via vibration. When notified about an
incoming call on an Android smartphone, you may reject the call
by long-pressing the button on Elite +HR Fitness Band . Notification
can be set up from: i-gotU Life App Menu -> Notification.
At Jarv, we are dedicated to making the best quality product . To back this up,
your Jarv Elite +HR Fitness Band has a One (1) year limited warranty, valid from
the date of purchase. Should you require additional information or have any
questions about your product or its warranty, please contact us via email at:
Your Elite +HR Fitness Band can be configured directly on the
i-gotU Life app.
Battery Life: Up to 15 days without Heart Rate
Up to 7 days with built-in HR turned on 1hr/ day
1.
2.
3.
4.
Please make sure your Elite +HR Fitness Band is fully charged when
used for the first time, it takes about 2 hours before it is fully charged.
The device is water resistant- which means it is rain-proof, splash-
proof, and sweat-proof. It cannot withstand the force associated with
water jet and swimming strokes. Remove your device before
showering or swimming: Pressurized or high velocity water jet may
penetrate into the device. High temperature and steam of sauna or
steam room may cause damage to the device.
Whenever you get your wristband/watch wet, dry it thoroughly before
putting it back on.
Please do not use any corrosive chemical to clean the device.
The built-in Li-Polymer battery might be damaged if its remains low
power for an extended period of time. It is recommended that you
charge the battery of your device once every three months to prolong
the battery’s lifespan, even though the device might not be in use.
Important Notice
After the implementation of the European Directive 2002/96/EU in the national
legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic Waste.
Consumers are obliged by law to return electrical and electronicdevices at the
end of their service lives to the public collecting points set up for this purpose or
point of sale. Details to this are defined by the national law of the respective
country. This symbol on the product, the instruction manual or the package
indicates that a product is subject to these regulations. By recycling, reusing the
materials or other forms of utilizing old devices, you are making an important
contribution to protecting our environment.
Other Jarv Watch manuals
