Jensen JSBW-750 User manual

WALL MOUNTABLE 2.1 CHANNEL BLUETOOTH
SOUNDBAR SPEAKER WITH BUILT-IN SUBWOOFER
USER MANUAL
JSBW-750
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING
THIS UNIT AND RETAIN THIS BOOKLET FORFUTURE REFERENCE.

E-1
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The Caution Marking is located at the bottom of the apparatus.
The Rating plate is located at the bottom enclosure of the apparatus
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that product heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for a long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
15. This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquids such as vases shall be placed on the apparatus.

E-2
16. Do not overload wall outlet. Use only power source as indicated.
17. Use replacement part as specified by the manufacturer.
18. The product may be mounted to a wall only if recommended by the
manufacturer.
19. Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks.
20. Power Sources - This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the
operating instruction.
21. Object and Liquid Entry - Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of any kind on
the product.
22. Damage Requiring Service - Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the
product to its normal operation.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a
need for service.
23. Main plug is used as disconnect device and it should remain readily operable
during intended use. In order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected from the mains socket
outlet completely.
24. The battery (battery or batteries or battery pack) shall not be exposed to
excessive heat such as sunshine, fire or the like.
25. Excessive sound pressure from earphones and headphone can cause hearing
loss.
This symbol indicates that this product incorporates doub le insulation
between hazardous mains voltage and user accessible p a r ts.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF AC PLUG TO WIDE SLOT. FULLY INSERT.
SAVE THESE
INSTRUCTIONS

E-3
COMPLIANCE WITH FCC REGULATIONS
FCC ID OG5MW1481
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
PROTECT YOUR FURNITURE
This system is equipped with non-skid rubber ‘feet’ to prevent the product from
moving when you operate the controls. These ‘feet’ are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood
preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and
leave marks or a rubber residue on the furniture.
To prevent any damage to your furniture we strongly recommend that you
purchase small self- adhesive felt pads, available at hardware stores and home
improvement centers everywhere, and apply these pads to the bottom of the
rubber ‘feet’ before you place the product on fine wooden furniture.

E-4
DEAR JENSEN
®
CUSTOMER
Selecting fine audio equipment such as the unit you've just purchased is only
the start of your musical enjoyment. Now it's time to consider how you can
maximize the fun and excitement your equipment offers. This manufacturer
and the E lectron i c Industries Association's Consumer Electronics Group
want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or
distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to
higher volumes of sound. So what sounds "normal" can actually be loud and
harmful to your hearing. Guard against this by setting your equipment at a safe
level BEFORE your hearing adapts.
To establish a safe l e v e l :
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and
without distortion.
• Once you have established a comfortable sound l e v e l : Set the dial and
leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the
future. After all, we want you listening for a lifetime.
We Want You Listening For a Li f e t i m e
Used wisely, your new sound equipment will provide
a lifetime of fun and enjoyment. Since hearing
damage from loud noise is often undetectable until
it is too late, this manufacturer and the Electronic
Industries Association ' s Consumer Electronics
Group recommend you avoid prolonged exposure to
excessive noise.
Customer's Re c o r d :
The serial number of this product is found on its bottom cover. You should note
the serial number of this unit in the space provided as a permanent record of
your purchase to aid in identification in the event of theft of loss.
Model Number : JSBW-750 Serial Number :

E-5
LOCATION OF CONTROLS
1 MID-HIGH RANGE SPEAKERS 8 RCA LINE-IN JACKS
2 WOOFER SPEAKERS 9 RCA COAXIAL JACK
3 REMOTE CONTROL SENSOR 10 AUX-IN JACK
4 - (volume down) 11 OPTICAL–IN JACK
5 + (volume up) 12 MAIN POWER ON/OFF SWITCH
6 STANDBY/MODE BUTTON 13 POWER CORD
7 STATUS INDICATOR 14 USB JACK (for 1A USB charging)
RED = STANDBY
BLUE = BLUETOOTH MODE
LIGHT BLUE = OPTICAL INPUT MODE
PINK = COAXIAL INPUT MODE
GREEN = AUX/RCA INPUT MODE

E-6
REMOTE CONTROL
Remove the protective tab to activate remote
The Remote Control has a pre-installed lithium
CR2032 battery. Remove the protective tab to
activate the remote control .
Battery Installation
1. Use a screwdriver to remove the screw (#A).
2. Remove the battery compartment cover (#B).
3. Place the battery into the battery compartment.
4. Make sure that the side marked with + is facing
up.
5. Replace the battery compartment cover (#B).
6. Use a screwdriver to secure the screw (#A).
Note :
1. If the remote control does not work properly,
replace the battery.
WARNING : DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.
The remote control supplied with this product contains a coin/button cell battery. If
the coin/button cell battery is swallowed, it can cause severe internal burns in just
2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does
not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
1
8 MOVIE
2 COAX 9 MUTE
3 OPTICAL 10
4 11
5 12
6 PAIR 13 AUX/RCA
7 MUSIC 14 BT

E-7
BATTERY WARNING
1. Be sure that the batteries are installed correctly. Wrong polarity may damage
the unit.
2. Use only the size and type of batteries specified.
3. If the unit is not to be used for an extended period of time, remove the batteries.
Old or leaking batteries can cause damage to the unit and may void the
warranty.
4. Do not try to recharge batteries not intended to be recharged; they can
overheat and rupture. (Follow battery manufacturer’s directions).
5. Do not dispose of batteries in fire, batteries may leak or explode.
CONNECTION
*Not all TVs have the audio outputs shown above. Check the user manual from
your TV to determine which connection is best for your TV.
To connect the Sound Bar directly to other devices (Blu-ray player, game systems,
etc), check the device’s user manual to determine the best connection to use.
**When using either of the Digital Inputs, if the status indicator light is flashing
quickly:
(A) Ensure that the Optical cable or Coaxial cable is properly connected;
(B) Try setting the TV output to PCM; or
(C) Connect directly to your Blu-ray/other source, some TVs do not pass through
digital audio.
NOTE: Digital connection cables (coaxial and optical) are not included.

E-8
CONNECTING THE POWER
Risk of product damage !
- Ensure that the power supply voltage corresponds
to the voltage printed on the back or the underside
of the unit.
- Before connecting the AC power cord (#13),
ensure you have completed all other connections.
- Connect the mains plug of the main unit to a mains
socket.
- Ensure all connections are connected before
connecting to the mains power socket.
GETTING STARTED
• Press the MAIN POWER ON/OFF SWITCH (#12) on the back of the JSBW-750
to the ON position, the main unit will enter standby mode, and the STATUS
INDICATOR (#7) will light up red.
• Press the STANDBY/MODE BUTTON (#6) on the main unit or the
BUTTON (#1) on the remote control to turn the JSBW-750 on. The STATUS
INDICATOR (#7) will change from red to the color associated with the last mode
the JSBW-750 was operating in. Blue=Bluetooth mode, Light Blue=Optical input
mode, Pink=Coaxial input mode or Green=AUX/RCA input mode.
• Press and hold the STANDBY/MODE BUTTON (#6) on the main unit or
press the BUTTON (#1) on the remote control to switch the main unit back to
Standby mode. The STATUS INDICATOR (#7) will change to red.
• Set the MAIN POWER ON/OFF SWITCH (#12) to the OFF position if you want to
turn off the JSBW-750 completely.
Note : When the JSBW-750 is sitting idle, and no input signals are being received
for 60 minutes, the unit will automatically switch to Standby mode.
Selecting Operation Modes
Using the remote control, press the audio source buttons BT (#14), OPTICAL (#3),
COAX (#2) or AUX/RCA (#13) to change to that mode directly.
You can also tap the STANDBY/MODE BUTTON (#6) on the main unit
repeatedly (power on) to switch between the different operating modes. The
STATUS INDICATOR (#7) will light in different colors indicating the mode you are
in.
Blue = Bluetooth mode
Light Blue = Optical input mode
Pink = Coaxial input mode
Green = AUX/RCA input mode

E-9
BLUETOOTH OPERATION
Pairing a Bluetooth enabled device with the JSBW-750.
1. Turn on the JSBW-750 and select BT mode. The STATUS INDICATOR (#7) will
light up Blue and begin flashing.
2. The JSBW-750 will automatically go into Pairing/Discoverable mode.
3. Turn on the Bluetooth function for the device you want to link to, and enable the
search or scan function to find the JSBW-750.
4. Select "JSBW-750" from the device list when it appears on your device screen.
If required, enter the pass code “0000” to pair (link) JSBW-750 with your device.
5. If you are pairing (linking) your computer to the speaker using Bluetooth, you
may need to set the JSBW-750 as your computer’s default sound device.
6. After successfully pairing the JSBW-750 with your Bluetooth device, The
STATUS INDICATOR (#7) will stop flashing and remain lit Blue.
7. If you want to pair (link) the JSBW-750 with another Bluetooth device, press
and hold the PAIR BUTTON (#6) on the remote a few seconds. The STATUS
INDICATOR (#7) will begin flashing Blue. The JSBW-750 will go into
Pairing/Discoverable mode. Repeat steps 3 & 4.
Now you can play music from your Bluetooth device wirelessly to the JSBW-750.
1. Select your favorite song, press the Play/Pause on your Bluetooth device or the
Play/Pause BUTTON (#5) on the JSBW-750 remote control to play or pause
the song from your Bluetooth device.
2. Press the Skip Forward BUTTON (#11) or Skip Backward BUTTON
(#4) on the remote control to select the Next or Previous track.
3. Press “▲” / “ ” BUTTON (#12/10) on remote control or tap the “+”/ “-” BUTTON
(#5/4) on the main unit and adjust the volume control of your Bluetooth device
until you reach a comfortable listening level.
Note :
1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth
enabled devices for Bluetooth operation since it may vary from model to
model.
2. If your Bluetooth enabled device does not support A2DP profile, it will not play
the music through the speaker, even if paired (linked).
3. Remember to turn off the JSBW-750 when you have finished listening,
4. Don't forget to switch off the power of your Bluetooth device as well.
5. The music playback will automatically be paused when you have an incoming
call. When the call is ended, the JSBW-750 will start playing again.

E-10
OPTICAL/COAXIAL (DIGITAL INPUTS) OPERATION
NOTE: Digital Cables (Optical / Coaxial) are not included.
1. Ensure that the connections to the JSBW-750 are securely attached to the TV
or other audio device via Optical or Coaxial cables (not included).
2. Turn on the JSBW-750, repeatedly press the STANDBY/MODE BUTTON
(#6) on the main unit or press the OPTICAL BUTTON (#3) or COAX BUTTON
(#2) on the remote control to select the appropriate OPTICAL or COAXIAL
mode.
3. Operate your connected audio device directly for playback features.
4. Press the “▲” / “ ” BUTTON (#12/10) on remote control or tap the “+”/ “-”
BUTTON (#5/4) on the main unit to adjust the audio level.
NOTE : If no sound is heard from the JSBW-750, and the status indicator light is
rapidly flashing, Make sure the audio (digital output) setting of your source
player (e.g. TV, DVD player, game player) is set to PCM.
AUX/RCA OPERATION
1. Ensure that the connections to the JSBW-750 are securely attached to the TV
or other audio device via the included 3.5mm-RCA cable.
2. Turn on the JSBW-750, press the STANDBY/MODE BUTTON (#6) on the
main unit repeatedly or press the AUX/RCA BUTTON (#13) on remote control
to select the AUX/RCA input mode.
3. Operate your connected audio device directly for playback features.
4. Press the “▲” / “ ” BUTTON (#12/10) on remote control or tap the “+”/ “-”
BUTTON (#5/4) on the main unit to adjust the audio level.
Note:
•When using the RCA LINE-IN JACKS (#8), make sure the AUX-IN JACK is
unplugged.
•If you connect the JSBW-750 to the Line-Out Jack of your external device, you
only need to adjust the volume control of your JSBW-750. If you connect to the
headphone jack of your external device, you may need to adjust both the
volume controls of your external device and the JSBW-750 to obtain the
desirable listening level.
•Remember to turn off the JSBW-750 when you have finished listening. Don't
forget to switch off the power of your external audio device as well.

E-11
Power Saver Mode
If the JSBW-750 is sitting idle, and no input signals are being received for 60
minutes, the unit will automatically switch to Standby mode to save energy.
NOTE:
Please note that a low volume setting from the audio source may be recognized as
“no audio signal”: this will affect the capability of signal detection from the device
and can also originate an automatic switch into standby mode. If this happens
please reactivate the audio signal transmission or increase the volume setting on
the audio source player (MP3 player, etc.), in order to resume playback. Please
contact the local service center if the problem remains.
USB CHARGING PORT
This unit features a USB JACK (for 1A USB charging) (#14) your portable device
(iPod, iPhone, Android phone, etc.) when used with the USB charging cord that
came with your device.
1. Plug one end of the USB cable (not included) into the USB JACK (for 1A USB
charging) (#14) located on the side of the unit. Plug the other end of the cord
into the device you wish to charge.
2. Observe the battery charge indicator on your device to make sure the
charging process starts normally.
3. Unplug the cable when your device is fully charged.
CAUTION:
Before charging, please refer to the user manual of the device you wish to charge
to make sure the charging current requested does not exceed 1A (1000mA).
Overloading the charging circuit may damage the unit permanently and void the
warranty.
1. The USB charging port of this unit supplies a DC 5V output at 1000mA
maximum current to charge your smart phone or portable device battery and it
cannot support any other voltage range.
2. Make sure the device you want to charge has a battery charge rating of DC 5V
only.
3. The USB port of this unit is designed for smart phone or portable device battery
charging only and it cannot support data transfer or connect to computer.
4. Do not connect the USB port of this unit to other external power charger USB
ports, it may damage both units and void the warranty.
Note:
1. Some smart phones and portable devices use proprietary USB connections
and circuitry, so they may not charge when plugged into the USB port.
Please refer to your device user manual before you attempt to charge them.
2. It is normal if the unit gets warm while the USB port is in use and charging
your smart phone or portable device.
3. Do not charge your smart phone over 12 hours continuously. Disconnect
your smart phone or other portable device from the USB cord once it is fully
charged.

E-12
WALL MOUNTING
NOTE :
At ON mode, press and hold the Play/Pause BUTTON (#5) on the JSBW-750
remote control for about 10 seconds to exchange the L/R channels after this
soundbar is mounted on a wall, the status indicator will flash twice when the L/R
channels are exchanged.
CARE AND MAINTENANCE
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.
2. Do not tamper the internal components of the unit.
3. Clean your unit with a dry cloth. Solvent or detergent should never be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5. Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
CLEANING THE UNIT
•To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
•The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture, Use caution when cleaning and wiping the plastic parts.

E-13
•If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any
wax or polish sprays on the cabinet.
•If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never
use abrasive cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while
cleaning.
TROUBLE SHOOTING GUIDE
PROBLEM POSSIBLE CAUSE SOLUTION
No Power The unit is disconnected from
the AC outlet
AC outlet is not functioning
Power On/Off Switch is off
Reconnect to the AC outlet
Change to another outlet
Set the Power On/Off Switch to On
Remote
Control does
not work
Battery empty
Installed battery wrong polarity
Too far from the main unit
Replace battery
Re-install battery in correct polarity
Reduce the distance
No Sound Select wrong source input Select correct source input
Sound is
distorted
Volume level is set too high Decrease the volume level
Unit gets
warm after
extended
play at high
volume
This is normal Turn the unit off for a period of
time or lower volume
No sound
when
playing
audio via
Bluetooth
Your Bluetooth device has
been paired
The volume control of your
Bluetooth device is set at
too low
The volume control of main
unit is set at too low
According to the "Bluetooth
operation"
Increase the volume of your
Bluetooth device
Increase the volume of main unit
to adjust the VOLUME control
SPECIFICATION
Power Input 120V~60Hz
Power Consumption 45 W
USB Output 5V 1A
Output Power (RMS) 10Wx2 +40W (Bass)
Mid-High Range Speaker 2 x 2” 8Ohm 10W
Woofer Speaker 4 x 2” 4Ohm 10W
Frequency Response 40Hz-20KHz
Remote Control 1 x DC 3V CR2032 button cell (included)

E-14
SPECTRA GREEN NOTICE
At Spectra, environmental and social responsibility is a
core value of our business. We are dedicated to
continuous implementation of responsible initiatives
with an aim to conserve and maintain the environment
through responsible recycling.
Please visit us at http://www.spectraintl.com/green.htm for more information on
Spectra’s green initiatives or to find a recycler in your area.
The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Spectra Merchandising
International, Inc. is under license. Other trademarks and trade names are those of
their respective owners.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from
defective materials or factory workmanship for a period of 90 days from the date of
original customer purchase and provided the product is utilized within the U.S.A. This
warranty is not assignable or transferable. Our obligation under this warranty is the
repair or replacement of the defective unit or any part thereof, except batteries, when
it is returned to the SPECTRA Service Department, accompanied by proof of the date of
original consumer purchase, such as a duplicate copy of a sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for warranty
service. If the product is repaired or replaced under warranty, the return charges will be at
SPECTRA’s expense. There are no other express warranties other than those stated
herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is
demonstrated.
b. It has not been subjected to accident, misuse, abuse, improper service, usage
outside the descriptions and warnings covered within the user manual or non-
SPECTRA approved modifications.
c. Claims are made within the warranty period.
2. This warranty does not cover damage or equipment failure caused by electrical wiring
not in compliance with electrical codes or SPECTRA user manual specifications,
or failure to provide reasonable care and necessary maintenance as outlined in the
user manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when products
are used in nonresidential environment or installed outside the United States.

E-15
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. TO OBTAIN SERVICE please remove all batteries (if any) and
pack the unit carefully and send it freight prepaid to SPECTRA at the address shown below.
IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above, please
include a proof of purchase (dated cash register receipt) so that we may establish your
eligibility for warranty service and repair of the unit without cost. Also include a note with a
description explaining how the unit is defective. A customer service representative may
need to contact you regarding the status of your repair, so please include your name,
address, phone number and email address to expedite the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $60.00
to cover the cost of repair, handling and return postage. All out of warranty returns must be
sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at
[email protected] for updated information on the unit requiring service. In some
cases the model you have may be discontinued, and SPECTRA reserves the right to offer
alternative options for repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL60634, USA. 1-800-777-5331
To register your product, visit the link on the website below to enter your information.
http://www.spectraintl.com/wform.htm
0315 Printed in China