Philips HTS6100/75 User manual

3Enjoy
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theater System.
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
HTS6100
What’s in the box?
Connect
Set up
Enjoy
1
2
3
2008 CPhilips Consumer Lifestyle
All rights reserved.
sgpjp_821/75-eng1
EasyLink control
This feature is only applicable if this DVD Home Theater
unit is connected to HDMI CEC compliant TV/device
using HDMI cable. It enables all the linked devices
response or react to certain commands simultaneously
with one touch control.
AUDIO
AUDIO
HDMI
HDMI CEC
TV
HDMI
ATurn on the HDMI CEC operations on your TV and
other connected devices. See TVs/devices manual for
details.
BYou can now enjoy the EasyLink controls.
One touch play [ Auto Wake-up TV ]
APress PLAY.
It turns on this unit and start disc play (if a video disc
is detected), and your TV automatically turns on and
switches to the correct viewing channel.
Note This is only possible if this unit is in standby
mode. If this unit is in active mode, you have to press
DISC followed by PLAY to start disc play.
One touch power off [ System Standby ]
APress and hold 2.
It turns off all linked devices.
Note This unit responses to standby command from
other HDMI CEC compliant TV/devices.
One touch audio input switching
This unit is able to render the audio signals from the
active source and switch automatically to the
corresponding audio input.
Before you can enjoy this feature, connect audio cables
from this unit to your TV/devices and follow the
instructions below to map the audio inputs to the
connected devices.
APress DISC.
BPress OPTIONS.
CPress B.
DSelect
[ EasyLink ], then press B.
Screen Saver
DivX(R) VOD Code
Sleep Timer
Display Dim
Disc Lock
OSD Language
EasyLink
Standby Mode
General Setup
Auto Wake-up TV
System Standby
System Audio Control
Audio Input Mapping
ESelect [ System Audio Control ] > [ On ], then
press OK.
FSelect [ Audio Input Mapping ], then press OK.
GSelect [ OK ] in the menu, then press OK to start
scanning of devices.
HWhen scanning complete, select the audio input of
this unit that is used to connect to your TV/device
(e.g. AUX1 Input), then press B.
ISelect the TV/device (appeared in its brand name)
in the right panel, then press OK.
JRepeat steps 8~9 to map other connected devices.
KTo exit the menu, press OPTIONS.
Note Philips does not guarantee 100%
interoperability with all HDMI CEC compliant devices.
DVD HomeTheater (SoundBar) Remote Control
and 2 batteries
Wall mount bracket
and 2 knobs
Micro ber
cleaning cloth
Subwoofer
User
Manual
Power cable Composite
Video cable
HDMI cable
AM/MW loop
antenna
subwoofer
Satellite Receiver /
Cable Box
HDD / DVD Recorder
Docking
station

1Connect 2Set up
A
Find the viewing channel
APress 2to turn on this DVD Home Theater unit.
BTurn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, °button) until
you see the Video In channel.
B
Start Ambisound setup
When you turn on this DVD Home Theater unit
(SoundBar) for the rst time, follow the instructions on
the TV to complete the setup.
Please choose your language:
OSD Language
Select
Change
Stop: Exit
English
Melayu
Русский
ไทย
ASelect a language for on-screen display, then press
B.
B[ Welcome ] message is displayed, press B to
continue.
C[ Orientation ] message is displayed, press Bto
continue.
DSelect a most suitable predefined setting according
to your room environment and setup, press Bto
confirm and go to the next setup screen.
[ Room Acoustics ]
Select the type of walls that surround your room.
The default setting is [ Hard (concrete, wood) ].
[ Room Placement ]
Select the SoundBar placement position in your
room. The default setting is [ Middle of room ].
[ Height ]
Select the height at which the SoundBar is placed.
The default setting is between 0.8~1.2m.
[ Listening Position ]
Select the distance between the listening position and
the SoundBar. The default setting is between 2~3m.
EWhen [ Complete ] screen is displayed, press Bto
exit.
Note Refer to the accompanying user manual
for other setup options.
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
APlace the DVD Home Theater unit (SoundBar) at the
normal listening ear-level, or at least above the knee-
level. Face it straight ahead towards the listening
area.
BPlace the subwoofer on the floor, at least one meter
away from the TV.
B
Prepare for rear connections
APush up the catches to lift up the rear cover.
BConnect the required cables (see the following
sections for details) and direct all the cables to the
CABLE OUT point.
Note All the cables must be placed properly inside
the rear panel in order for the rear cover to close.
C
Connect to TV
HDMI IN
HDMI OUT
VIDEO OUT
VIDEO IN
zIf your TV supports HDMI, connect the HDMI cable
from the HDMI OUT jack to the HDMI IN jack on
your TV. Or;
zConnect the composite video cable from the VIDEO
OUT jack to the VIDEO IN jack on your TV.
Note HDMI connection does not support audio
output from your TV to this unit, a separate audio
connection is required.
D
Connect audio output from TV (for
EasyLink control)
To hear the TV audio through this DVD Home Theater
unit, connect an audio cable (not supplied) from the
AUDIO IN-AUX1 jacks to the AUDIO OUT jacks on
your TV.
Note To listen to the audio output from this
connection, press AUX/DI /MP3 LINK repeatedly
until ‘AUX1 INPUT’ is displayed on the display panel.
DVD Home Theater unit (rear)
DVD Home Theater unit (rear)
E
Connect subwoofer
TO SUBWOOFER
LOUDSPEAKERS
CB
A
D
AUnwind the cables from TO MAIN UNIT on the
subwoofer, then connect the gray end cable to TO
SUBWOOFER jack and white end cable to
LOUDSPEAKERS jack on this DVD Home Theater
unit.
BConnect the FM antenna to the inner pin of the FM
75 jack (for some models, it has been connected in
the factory.) Extend the wire for optimum reception.
CConnect the AM/MW loop antenna to the AM/MW
jack. Place it on a shelf, or attach it to a stand or wall.
DConnect the power cable from subwoofer to the AC
power outlet.
F
Connect docking station
DOCK
AConnect the iPod docking station to DOCK jack.
BIf necessary, turn the knob below the unit to adjust
the dock ‘support’ until it can fit your iPod.
Note To listen to the audio output from this
connection, press DOCK.
Subwoofer (rear)
Or