Jovision JVS-HD301C User manual

Wireless Camera Quick Start Guide EN
Kurzanleitung für folgende IP-Kameras DE
JVS-HD301C
JVS-DA230
JVS-DC810C
JVS-H302-A2
JVS-N3622-WF

Jovision Home Security Wi-Fi Camera
1
EN 02~13 Contents
Open Source Software License................................................................................................2
Security...........................................................................................................................................3
Prepare the camera......................................................................................................................4
Get CloudSEE Int 'l app ..............................................................................................................5
Set up camera with the app.......................................................................................................5
Record Settings............................................................................................................................9
Time Settings ..............................................................................................................................10
Alarm setting...............................................................................................................................10
System setting ............................................................................................................................11
FAQ ................................................................................................................................................12
CloudSEE Int’l pp...............................................................................................................12
IP Camera.............................................................................................................................12
Equipment Disposal ..................................................................................................................13
Important Note ............................................................................................................................13
DE 14~29 Inhalt
Open- Source- Softwarelizenz................................................................................................14
Sicherheit......................................................................................................................................15
CloudSEE Int’l App herunterladen und starten...................................................................16
Kamera vorbereiten..................................................................................................................17
Kamera mit der App einrichten.............................................................................................17
Vorbereitung und Aufnahme auf einer SD-Karte..............................................................22
Aufnahme Modus wählen .......................................................................................................24
Datum & Uhrzeit einstellen.......................................................................................................25
Alarm Einstellung........................................................................................................................25
System Einstellung......................................................................................................................26
FAQ ................................................................................................................................................27
CloudSEE Int’l pp ................................................................................................................27
IP-Kamera ............................................................................................................................27
Entsorgung ...................................................................................................................................28
Wichtige Hinweise......................................................................................................................29

Jovision Home Security Wi-Fi Camera
2
Open Source Software License
This product contains software whose rightsholders license it under the terms of the
GNU General Public License, version 2 (GPLv2), version 3 (GPLv3) and/or other open
source software licenses. If you want to receive the complete corresponding source
code, we will provide you and any third party with the source code of the software
licensed under an open source software license if you send us a written request by mail
or email to the following addresses:
Jovision OSS Support Team E-Mail:
[e-mail]
Postal:
Jovision Technology Co., Ltd.
Floor 11, Building D, In-hi tech Square, No. 2008 Xinluo Street,
Jinan, Shandong, China
detailing the name of the product and the firmware version for which you want the source
code and indicating how we can contact you.
PLEASE NOTE THAT WE WILL ASK YOU TO PAY US FOR THE COSTS OF A DATA
CARRIER AND THE POSTAL CHARGES TO SEND THE DATA CARRIER TO YOU.
THE AMOUNT CAN BE VARIED ACCORDING TO YOUR LOCATION AND GENIATECH
OSS SUPPORT TEAM WILL NOTIFY THE EXACT COST WHEN RECEIVING THE
REQUEST.
THIS OFFER IS VALID FOR THREE YEARS FROM THE MOMENT WE DISTRIBUTED
THE PRODUCT AND VALID FOR AS LONG AS WE OFFER SPARE PARTS OR
CUSTOMER SUPPORT FOR THAT PRODUCT MODEL.

Jovision Home Security Wi-Fi Camera
3
Security
CHANGE THE DEFAULT PASSWORD
The administrator is inactive on a new device. For
security reasons, you should assign a password during
the setup phase. If you have assigned a password, the
administrator will be activated and your device will be
secure. Please write down the password and CloudSEE
ID of your camera and keep it in a safe place.
We strongly recommend changing the password to something of your own
choosing (using a minimum of 8 characters, including upper case letters, lower
case letters, numbers, and special characters) in order to increase the security
of your product. Proper configuration of all passwords and other security
settings is the responsibility of the installer and/or end-user.

Jovision Home Security Wi-Fi Camera
4
Prepare the camera
Remove the camera from the package and power the camera on with power supply.
Then the LED should become visible, on some devices you will also hear a short sound
inside, this is the reset check of the IR-cut.
Here are pictures of the camera interface, which will be helpful for further settings.
JVS-H302-A2 & JVS-N3622-WF Cable

Jovision Home Security Wi-Fi Camera
5
Get CloudSEE Int 'l app
Before we start, you need to download our latest app from the App Store or Google Play
Store. Please open the respective store and enter "CloudSEE Int 'l" as search term. Get
and install the app on your phone. You can also get the app by scanning the QR code:
Run the app after installation. Now in the login box ("CloudSEE Int 'l Figure 1) you have
the choice to log in. If you are not registered yet, we recommend you to do so
("CloudSEE Int 'l Figure 2). Once the registration has been completed, you can log in
with your credentials.
CloudSEE Int'l fig. 1 CloudSEE Int'l fig. 2
Set up camera with the app
1) After login, click on the "+" button at the top right corner.
CloudSEE Int'l fig. 3
There are three different options to choose:

Jovision Home Security Wi-Fi Camera
6
Connect Online Device: The camera or NVR is already connected to the router
(Ethernet cable or Wi-Fi), the CloudSEE status is online and the credential as well as the
CloudSEE ID of your camera are known.
Sound Wave: The Wi-Fi camera (new device or has been reset) is only connected to the
power grid and need to connect to Wi-Fi network.
LAN Scanning: Your camera or NVR is already powered on and connected to the router,
this is an easy way to find and add devices connected in your LAN.
In our case, the camera is only powered, but is not yet connected to the router. We need
to connect the camera to router via Wi-Fi. To do this, please choose "Sound Wave".
2) Then you will be asked to reset the camera, press reset button on the camera
(CloudSEE Int 'l Figure 4) and hold until you hear an audio prompt which tells you that
the camera is ready for configuration.
Note: JVS-DC810C/JVS-N3622-WF has no speaker to give audio prompt, so please
check the IR LED which will blink red when press reset button, after that, the camera will
be ready for configuration.
CloudSEE Int'l fig. 4
3) Make sure your phone has connected to the same router, enter your Wi-Fi password
in the next page. If you have not changed this, the password can be found on the router's
label. After that, click "Connect Wi-Fi."

Jovision Home Security Wi-Fi Camera
7
CloudSEE Int'l fig. 5
4) Place your phone in front of the camera to get the best audio connection. Press
“Send” to generate a sound that can transmit the SSID and password to the camera and
wait for Wi-Fi connection confirmation.
CloudSEE Int'l fig. 6
5) The camera will give audio prompt when receive the sound, such as "Receive
network configuration" or "Wi-Fi information received". Then camera will automatically
connect Wi-Fi with the credential, there will be another audio prompt if succeed,
“Successful configuration” or “I have connected to your Wi-Fi”, If you hear all the prompt,
please click “Next” and "OK".
Note: JVS-DC810C/JVS-N3622-WF won’t receive sound or give prompt, instead, it will
configure Wi-Fi with another method that runs background, which starts when the ‘Send’

Jovision Home Security Wi-Fi Camera
8
button is pressed. So, please click ’Send’ and wait for about 30 seconds to make sure
there is enough time for the procedure. Then click “Next” and "OK".
CloudSEE Int'l fig. 7
6) Then click "Continue." On the next page, the app will start searching for a newly
connected camera and prompt you the camera has been successfully added.
CloudSEE Int'l fig. 8
Now you can connect the camera in device list.

Jovision Home Security Wi-Fi Camera
9
Record Settings
The cameras support MicroSD cards up to 128GB (Class 10 and above).
1) Insert the MicroSD card into the camera's designated slot.
2) Choose the connected camera in the main page of the CloudSEE Int 'l app
(CloudSEE Int 'l Figure 9). In the live video page, click on "Settings" (CloudSEE Int 'l
Figure 10).
CloudSEE Int'l fig. 9
CloudSEE Int'l fig. 10
3) Now click on "Memory" (CloudSEE Int 'l Figure 11). Change the recording mode to
"Stop recording" and format the SD card (CloudSEE Int 'l Figure 12).
CloudSEE Int'l fig. 11 CloudSEE Int'l fig. 12
Now the SD card is ready and you have the option to select two different types:
All Day Record: The camera records 24/7.
Alarm Record: The camera records on motion detection.